VTI Instruments - EX1200 Series Counter/Timer (EX1200-1538)
- 8 frequency counter channels, 16 isolated digital I/O channels, 2 isolated DAC channels in a single card
- Single frequency measurement range that works from 0.05 Hz to 1 MHz
- Very stable TCXO base clock, 50 MHz ±1 ppm
- 195 kΩ Input impedance with selectable coupling (AC/DC)
- Wide differential input voltage range (±48 V) with up to 250 V working common mode voltage
- Programmable threshold and hysteresis levels with 1 mV resolution
- Support for quadrature encoder
- Isolated DIO channels with up to 60 V compliance
- Isolated and independent 16-bit DAC channels, configurable for voltage or current output
The EX1200-1538 is a high-performance multifunction card that provides 8-channels of independent 32-bit counters, 16 channels of isolated digital I/O, and 2 channels of isolated analog output (DAC) on a single card. The wide range of measurement functions make this card suitable for both electronic functional test, as well as precision data acquisition applications. Combining the EX1200-1538 with the DMM and switch capabilities allows for a complete measurement, control, and distribution system in a small 1U rack space.
Counter channels accept both analog and digital inputs ranging from ±48 V of true differential voltages which makes it suitable to use with almost any real world signal without the need for external signal conditioning. Programmable hysteresis and threshold levels over the entire input voltage range can help to extract the fundamental frequency from the noisiest analog input signals. Electronic counter channels can directly measure the RPM from tooth wheel and other types of sensors.
The EX1200-1538 isolated digital I/O channels can be configured as input or output on a per channel basis. Each channel is isolated from each other and can accept voltages from 2.5 V to 60 V. The output channels use solid-state switches that work in any polarity.
The isolated analog output channels are independently configurable as either constant voltage or current mode. The output range is fixed (±10 V in voltage mode and ±20 mA in current mode) and the output levels are programmable with 16-bit resolution. Both channels are isolated from each other and fully protected, providing the capability to be connected in series or parallel for an even wider output range.
More Product Information
- Eight channel, universal, 2-/4-wire RTD simulator
- Fast, monotonic, glitch-free resistance value programming
- Suitable for simulating resistors, platinum/copper/nickel RTDs
- Suitable for pulsed and continuous excitation inputs
- Direct temperature value programming
- Extensive triggering capability
- Synchronize level changes with input measurements to facilitate test sequencing
The SMP7500 is a 96-channel 300MA open-collector/relay drivers, and the SMP7600A (pictured) and SMP7600A-S-11351 are 5 W programmable loads.
- High-density, compact (1U) precision data acquisition instruments
- LXI™ LAN connectivity
- Fully integrated signal conditioning maximizes performance and accuracy
- Easily integrate thermocouples, voltages, RTDs, thermistors, frequency, strain and pressure on an per-channel basis
- Distributed, synchronized measurements over the wire
- Scalable architecture easily expands from tens to thousands of channels
- DC version available for test cells requiring closer proximity to test article
- End-to-end self-calibration ensures optimum runtime performance
- Web-based access for monitoring and control
- Exlab turnkey software for simplified setup, control and data display
- 24-bit, delta-sigma ADC, simultaneous sampling
- Programmable Sample Rate up to 128kSPS
- Full, Half & Quarter Bridge with 120Ω, 350Ω & 1kΩ bridge completion
- Voltage Excitation: 0.5V to 10V
- Current Excitation: 0.46mA
- 2-Wire & 4-Wire Ohms/RTD
- Bridge Zero Balancing
- Built-In-Self-Test (BIST)
- Strain Lead Wire Calibration
- Shunt Calibration: 50kΩ, 100kΩ & External provided by User
- TEDS Support
- LXI Ethernet Interface
- IEEE-1588 Synchronization
- Power over Ethernet (PoE) or 10–50 V DC input
- Built-in Parallel Data Streaming
- Full-featured Embedded Web Interface
- Compact 1U Half-rack Form Factor
The APEX Turbine Data System (DS) is the next generation of data acquisition, control, setup, and online analysis. It reliably acquires time-synchronized data from a network of digitizers, regardless of sample rate or sensor type.
- Intuitive, icon-based setup and control
- Spreadsheet-style channel configuration
- Snapshot display with data export
- Independent sampling rates for each instrument
- Real-time online graphical data analysis
- Client / server architecture with multiple displays
- Synchronization of different data sources
- Detect/process events for close-loop control
- Post-acquisition analysis methods and data playback
- Easily create Virtual/Calculated channels based on physical channel data
The SMP5xxx product family is made up of the SMP5001 through SMP5005 general purpose relays.
- Highest resolution – 12 bits all the time
- More capability – integrates multiple instruments into one
- Comprehensive probe support – supports over 30 probes in 9 categories
- MAUI with OneTouch user interface for intuitive and efficient operation
RF/Coax switching modules up to 26 GHz for high frequency and communication switching needs
VTI Instruments
VTI Instruments, an AMETEK Programmable Power brand, provides products and systems which are used to monitor and record data that characterizes the physical integrity and performance of aircraft, engines, and other large structures, as well as automate the functional testing of complex electronic systems. VTI Instruments is recognized as an industry leader with a reputation of providing reliable data, first time, every time. A sustained focus on innovation and technology enables customers to optimize their capital investment through product longevity, while ensuring unmatched measurement integrity and data reliability.
VTI Instruments has customers in over 30 different countries and in a wide variety of industries including aerospace, defense, power generation, automotive and consumer electronics.
Contact Details
AMETEK Programmable Power, Inc. (VTI Instruments) − San Diego
9250 Brown Deer Road, San Diego, CA 92121, USA
Phone: 858-450-0085
Fax: 858-458-0267
Email: sales.ppd@ametek.com for general inquiries
Test & Measurement
Download Line Card
