VTI Instruments - SMP3xxx product family Multiplexers and Digital Analog Converters
The SMP3xxx product family is made up of the SMP3001, SMP3001DS, SMP3002, SMP3005, SMP3620 (pictured), and SMP3625.
The SMP3xxx product family includes 64-channel multiplexers (SMP3001 and SMP3001DS), 16 1x8 1-wire multiplexers (SMP3002), 12 1x5 2-wire multiplexers (SMP3005), 24-channel digital analog converters (SMP3620), and the SMP3625.
VTI's SMIP™ signal switching series revolutionized the automated signal switching marketplace by providing a level of modularity, density, and performance for the VXIbus platform that was unprecedented.
The SMIPII family includes:
- Power (Switching greater than 2 A)
- General Purpose
- Multiplexers/Scanners
- Matrices
- RF
- Relay Drivers, Loads & Digital I/O
Configuring your switch system has never been easier.
Step 1: Start with the SMP1100 or SMP1200 base units.
Step 2: Select up to two switch modules for the SMP1100 or up to six for the SMP1200. Different switch modules can be mixed together for maximum flexibility.
Step 3: Select the appropriate mating connectors
|
SMP3001 |
1x64 2-wire Multiplexer or 1x128 1-wire |
|---|---|
|
SMP3001DS |
1x64 2-wire Multiplexer, Discharge capability |
|
SMP3002 |
16 (1x8) 1-wire Multiplexer |
|
SMP3005 |
12 (1x5) 2-wire Multiplexer |
|
SMP3620 |
24-Channel Digital-Analog Converter |
|
SMP3625 |
16-Channel 400 Hz Output |
More Product Information
The SMX-4xxx product family includes the SMX-4411 through SMX-4415 matrix switches.
- Modular 6.5 digit DMMs for the EX1200 mainframes
- Tightly integrated into mainframes, allowing high-speed, synchronized scanning measurements without the need for external cabling.
- Input can be routed directly to the DMM or through an internal analog bus on the backplane.
- Super fast scanning with no processor intervention required
- Scanning configuration can be saved in the DMM’s non-volatile memory allowing quick recall of saved states
- Integrating ADC for with adjustable integration time depending on the level of accuracy required.
- “True RMS” AC readings
- Frequency and temperature measurements
-
Provides an effectively noise free environment around the device under test (DUT)
-
World’s first probe station with integrated TestCell Power Management (a TestCell is a connected set of equipment, including test software, instruments, probe station, thermal system, and related measurement accessories such as cables and on-wafer probes)
-
Up to 4x faster flicker noise thermal testing on 30 μm pads
-
Provides dark and dry environment for measuring light sensitive transistors, and devices at negative temperatures (<= -60°C) with frost free operation
-
Provides fully managed and filtered AC power to the entire system – prober and instruments
-
Filters harmful noise generated by external thermal control systems
-
Reduced “antenna effect” injection of unwanted RF noise into the measurement path
-
Provide up to 100dB attenuation (50Hz to 80Mhz) with 100mA max DC current handling
-
Ultra-low, fA-level current and fF-level capacitance measurements from -65 °C to + 300 °C
-
Enables full access to the chuck and the auxiliary sites
-
Intuitive, and precise movement of chuck in X, Y, and Z-direction
-
User-centered design minimizes training costs and enhances efficiency
-
Test automation out-of-cassette for higher test cell efficiency for over-night/over-weekend operation
See more Key Features on Specifications & Details tab
- Combine up to 6 SPDT and 6 multiport high-performance building blocks in a 2U footprint
- Extended life and self-terminating options provide maximum design flexibility
- Embedded web interface provides interactive utility to monitor and control relays from anywhere in the world
- Flexible API supports IVI and Linux development environments minimizing software investment
- LXI Trigger Event implementation provides seamless test synchronization with external devices
The LXI mainframes family includes 2-slot, half-rack LXI switching and data acquisition mainframes (EX1202/EX1262), 16-slot, 3U LXI switching and data acquisition mainframes (EX1208A and EX1208B, pictured), and 6-slot, 1U LXI switching and data acquisition mainframes (EX1206A).
- 96 digital lines configurable as either input or output
- Five available power supply rails for custom designs
- Mix and match with standard SMIP switching and digital I/O modules to create high density configurations
- VXI plug&play driver simplifies software development
- On-board connector header for simplified migration to PCB implementation
- Access to 16 MHz clock for use in complex designs
- Multiple front panel connector options
- Highest resolution – 12 bits all the time
- More capability – integrates multiple instruments into one
- Comprehensive probe support – supports over 30 probes in 9 categories
- MAUI with OneTouch user interface for intuitive and efficient operation
- Combine up to 12 fail-safe building blocks, dual SPDT, SP4T, SP6T, or transfer switch in a compact 1U footprint
- Front “pluggable” relays facilitate field maintenance
- Embedded web interface provides interactive utility to monitor and control relays from anywhere in the world
- Flexible API supports IVI and Linux development environments minimizing software investment
- LXI Trigger Event implementation provides seamless test synchronization with external devices
- Store up to 128 relay state configurations for quick recall, including an automatic power up state
- Define exclude lists to avoid setting an undesirable configuration
- Relay odometer tracks closures to facilitate preventative maintenance
- Intuitive, icon-based setup and control
- Spreadsheet-style channel configuration
- Snapshot display with data export
- Independent sampling rates for each instrument
- Real-time online graphical data analysis
- Client / server architecture with multiple displays
- Synchronization of different data sources
- Detect/process events for close-loop control
- Post-acquisition analysis methods and data playback
- Easily create Virtual/Calculated channels based on physical channel data
VTI Instruments
VTI Instruments, an AMETEK Programmable Power brand, provides products and systems which are used to monitor and record data that characterizes the physical integrity and performance of aircraft, engines, and other large structures, as well as automate the functional testing of complex electronic systems. VTI Instruments is recognized as an industry leader with a reputation of providing reliable data, first time, every time. A sustained focus on innovation and technology enables customers to optimize their capital investment through product longevity, while ensuring unmatched measurement integrity and data reliability.
VTI Instruments has customers in over 30 different countries and in a wide variety of industries including aerospace, defense, power generation, automotive and consumer electronics.
Contact Details
AMETEK Programmable Power, Inc. (VTI Instruments) − San Diego
9250 Brown Deer Road, San Diego, CA 92121, USA
Phone: 858-450-0085
Fax: 858-458-0267
Email: sales.ppd@ametek.com for general inquiries
Test & Measurement
Download Line Card
Document
