VTI Instruments - SMP75xx / 76xx Open-collector/Relay Drivers and Programmable Loads
The SMP7500 is a 96-channel 300MA open-collector/relay drivers, and the SMP7600A (pictured) and SMP7600A-S-11351 are 5 W programmable loads.
This SMP product family includes 96-channel 300MA open-collector/relay drivers (SMP7500) and 5 W programmable loads (SMP7600A and SMP600A-S-11351).
VTI's SMIP™ signal switching series revolutionized the automated signal switching marketplace by providing a level of modularity, density, and performance for the VXIbus platform that was unprecedented.
The SMIPII family includes:
- Power (Switching greater than 2 A)
- General Purpose
- Multiplexers/Scanners
- Matrices
- RF
- Relay Drivers, Loads & Digital I/O
Configuring your switch system has never been easier.
Step 1: Start with the SMP1100 or SMP1200 base units.
Step 2: Select up to two switch modules for the SMP1100 or up to six for the SMP1200. Different switch modules can be mixed together for maximum flexibility.
Step 3: Select the appropriate mating connectors
|
SMP7500 |
96-Channel 300 mA Open-Collector/Relay Driver |
|---|---|
|
SMP7600A |
Single-channel Programmable 5W Load |
|
SMP7600A-S-11351 |
Single-channel Programmable 5W Load for RT-CASS |
More Product Information
- 3000 VA to 15000 VA of AC Output Power
- Combines AC/DC source and power analyzer
- Harmonic analysis of Voltage and Current
- Programmable Impedance
- AC, DC and AC+DC Output Modes
- Multiple Chassis Configurations
- Powerful output transient generation
- High Crest Factor Capability
- Arbitrary waveform generation
- IEC 61000-3-2 and IEC 61000-3-3
- 96 digital lines configurable as either input or output
- Five available power supply rails for custom designs
- Mix and match with standard SMIP switching and digital I/O modules to create high density configurations
- VXI plug&play driver simplifies software development
- On-board connector header for simplified migration to PCB implementation
- Access to 16 MHz clock for use in complex designs
- Multiple front panel connector options
The EMX-4xxx product family contains high-performance breakout boxes (EMX-4008 and EMX-4016), smart high density dynamic signal analyzers (EMX-4250 and EMX-4251), smart PXIe 625 KSA/s 4-channel digizers (EMX-4350), and charge and IEPE PXIe 625 KSA/s 4-channel digitizers (EMX-4380).
The SMX-3xxx product family includes the SMX-3001 through SMX-3007 and SMX-3276 through SMX-3280 multiplexers.
- Large switching capacity in a small footprint
- Switch up to 16 A current - highest in its class
- High breakdown voltage (1,000 V rms between open contacts)
- Ideal for applications such as high current/high power switching, AC line power switching, driving relays for industrial machinery, solenoid switching, and automotive engine control
- Fail-safe interrupt inputs that can detect a fault condition automatically open up relays to their default state
The APEX Turbine Data System (DS) is the next generation of data acquisition, control, setup, and online analysis. It reliably acquires time-synchronized data from a network of digitizers, regardless of sample rate or sensor type.
- High power density in 1U / 2U / 4U / 14U chassis up to 18kVA
- Intuitive touch panel control
- Innovative iX2™ current doubling technology
- Multi-language display for global operation
- Auto paralleling for higher power
- Single phase 1U models and 1 or 3 phase selectable 2U / 4U / 14U models
- Complete avionic test suites (optional)
- ATE version available in 1U, 2U and 4U models
- Standard LXI LAN, USB and RS232, optional GPIB
- Legacy CSW5550 Emulation on the AST6003A1 Model
- Combine up to 6 SPDT and 6 multiport high-performance building blocks in a 2U footprint
- Extended life and self-terminating options provide maximum design flexibility
- Embedded web interface provides interactive utility to monitor and control relays from anywhere in the world
- Flexible API supports IVI and Linux development environments minimizing software investment
- LXI Trigger Event implementation provides seamless test synchronization with external devices
- Modular 6.5 digit DMMs for the EX1200 mainframes
- Tightly integrated into mainframes, allowing high-speed, synchronized scanning measurements without the need for external cabling.
- Input can be routed directly to the DMM or through an internal analog bus on the backplane.
- Super fast scanning with no processor intervention required
- Scanning configuration can be saved in the DMM’s non-volatile memory allowing quick recall of saved states
- Integrating ADC for with adjustable integration time depending on the level of accuracy required.
- “True RMS” AC readings
- Frequency and temperature measurements
VTI Instruments
VTI Instruments, an AMETEK Programmable Power brand, provides products and systems which are used to monitor and record data that characterizes the physical integrity and performance of aircraft, engines, and other large structures, as well as automate the functional testing of complex electronic systems. VTI Instruments is recognized as an industry leader with a reputation of providing reliable data, first time, every time. A sustained focus on innovation and technology enables customers to optimize their capital investment through product longevity, while ensuring unmatched measurement integrity and data reliability.
VTI Instruments has customers in over 30 different countries and in a wide variety of industries including aerospace, defense, power generation, automotive and consumer electronics.
Contact Details
AMETEK Programmable Power, Inc. (VTI Instruments) − San Diego
9250 Brown Deer Road, San Diego, CA 92121, USA
Phone: 858-450-0085
Fax: 858-458-0267
Email: sales.ppd@ametek.com for general inquiries
Test & Measurement
Download Line Card
Document
