VTI Instruments - SMP7000-xx General Purpose Prototyping Module
- 96 digital lines configurable as either input or output
- Five available power supply rails for custom designs
- Mix and match with standard SMIP switching and digital I/O modules to create high density configurations
- VXI plug&play driver simplifies software development
- On-board connector header for simplified migration to PCB implementation
- Access to 16 MHz clock for use in complex designs
- Multiple front panel connector options
The SMP7000-xx is a general purpose prototyping module that leverages the SMIP’s modularity and interface architecture to the VXIbus to provide over 24 square inches of real estate that is available for user-defined designs. System engineers can incorporate their own designs within a standard SMIP carrier and combine it with products, such as 1.8 GHz RF switching or 16 A relays that are already available on the platform. Custom DAC modules, or digital I/O cards with custom logic levels can easily be accommodated within the available breadboard space.
Flexible Interface and Programming Options
The SMP7000-xx provides access to 96 digital I/O lines and five fused power rails for interfacing to user-defined logic. Custom designs can be laid out on the thru-hole pattern available on the breadboard space. A connector header is provided to facilitate migration of the custom design to a printed circuit board layout. This enables the use of multiple front panel I/O possibilities, ranging from 15p Dsub to 160p high-density DIN connectors. All 96 digital lines are mapped to VXI extended memory space for direct register access. API support is also provided through the standard SMIP VXIplug&play driver, reducing the time required for software development.
|
SMP7000-15 |
Modular Prototyping breadboard with 15p DSub |
|---|---|
|
SMP7000-160 |
Modular Prototyping breadboard with 160p DSub |
|
SMP7000-25 |
Modular Prototyping breadboard with 25p DSub |
|
SMP7000-44 |
Modular Prototyping breadboard with 44p DSub |
|
SMP7000-62 |
Modular Prototyping breadboard with 62p DSub |
More Product Information
- 24-bit, delta-sigma ADC, simultaneous sampling
- Programmable Sample Rate up to 128kSPS
- Full, Half & Quarter Bridge with 120Ω, 350Ω & 1kΩ bridge completion
- Voltage Excitation: 0.5V to 10V
- Current Excitation: 0.46mA
- 2-Wire & 4-Wire Ohms/RTD
- Bridge Zero Balancing
- Built-In-Self-Test (BIST)
- Strain Lead Wire Calibration
- Shunt Calibration: 50kΩ, 100kΩ & External provided by User
- TEDS Support
- LXI Ethernet Interface
- IEEE-1588 Synchronization
- Power over Ethernet (PoE) or 10–50 V DC input
- Built-in Parallel Data Streaming
- Full-featured Embedded Web Interface
- Compact 1U Half-rack Form Factor
- Combine up to 12 fail-safe building blocks, dual SPDT, SP4T, SP6T, or transfer switch in a compact 1U footprint
- Front “pluggable” relays facilitate field maintenance
- Embedded web interface provides interactive utility to monitor and control relays from anywhere in the world
- Flexible API supports IVI and Linux development environments minimizing software investment
- LXI Trigger Event implementation provides seamless test synchronization with external devices
- Store up to 128 relay state configurations for quick recall, including an automatic power up state
- Define exclude lists to avoid setting an undesirable configuration
- Relay odometer tracks closures to facilitate preventative maintenance
The SMP6xxx product family is made up of the SMP6001, SMP6002, SMP6004, SMP6005, SMP6006, SMP6101, SMP6102, SMP6103, SMP6122, SMP6144, SMP6202, SMP6301 (pictured), SMP6301T, and SM6306.
-
Ideal for a wide range of applications such as RF, mm-Wave and sub-THz characterization, FA, DWC, MEMS, optoelectronic tests and WL
-
Re-configurable and upgradable as requirements grow
-
Minimizes setup times with no loss in performance or accuracy
-
Seamless integration of various measurement instruments
-
Solid station frame
-
Built-in vibration-isolation solution for superior vibration attenuation
-
Rigid microscope bridge
-
Compact and rigid mechanical design
-
Highly accurate measurement results
-
Incorporates best-known methods
-
Ergonomic and straightforward design for comfortable and easy operation
-
Low-profile design
-
Simple microscope operation
-
Quick and ergonomic change of DUT through pull-out stage
-
Minimize training efforts
-
Fast time to data
-
Convenient operation
-
Automatic calibration of instruments
-
In line with ISO17025 and other metrology standards
-
Automated optical readout module for multimeters
-
Unlimited custom instruments and procedures
-
Provides an effectively noise free environment around the device under test (DUT)
-
World’s first probe station with integrated TestCell Power Management (a TestCell is a connected set of equipment, including test software, instruments, probe station, thermal system, and related measurement accessories such as cables and on-wafer probes)
-
Up to 4x faster flicker noise thermal testing on 30 μm pads
-
Provides dark and dry environment for measuring light sensitive transistors, and devices at negative temperatures (<= -60°C) with frost free operation
-
Provides fully managed and filtered AC power to the entire system – prober and instruments
-
Filters harmful noise generated by external thermal control systems
-
Reduced “antenna effect” injection of unwanted RF noise into the measurement path
-
Provide up to 100dB attenuation (50Hz to 80Mhz) with 100mA max DC current handling
-
Ultra-low, fA-level current and fF-level capacitance measurements from -65 °C to + 300 °C
-
Enables full access to the chuck and the auxiliary sites
-
Intuitive, and precise movement of chuck in X, Y, and Z-direction
-
User-centered design minimizes training costs and enhances efficiency
-
Test automation out-of-cassette for higher test cell efficiency for over-night/over-weekend operation
See more Key Features on Specifications & Details tab
- High-density, compact (1U) precision data acquisition instruments
- LXI™ LAN connectivity
- Fully integrated signal conditioning maximizes performance and accuracy
- Easily integrate thermocouples, voltages, RTDs, thermistors, frequency, strain and pressure on an per-channel basis
- Distributed, synchronized measurements over the wire
- Scalable architecture easily expands from tens to thousands of channels
- DC version available for test cells requiring closer proximity to test article
- End-to-end self-calibration ensures optimum runtime performance
- Web-based access for monitoring and control
- Exlab turnkey software for simplified setup, control and data display
- Highest resolution – 12 bits all the time
- More capability – integrates multiple instruments into one
- Comprehensive probe support – supports over 30 probes in 9 categories
- MAUI with OneTouch user interface for intuitive and efficient operation
- Direct PC bus access data acquisition system provides the required sampling rate and resolution to meet IEC 61000-4-7 measurement requirements and supports high-speed data transfers.
- PC-based Harmonic and Flicker test software provides real-time full-color data display updates and continuous PASS/FAIL monitoring.
- Automatic calculation of the maximum permissible system impedance Zsys, using the Zref and measured Flicker parameters, as required per EN/IEC 61000-3-11.
- Intuitive operating software provides IEC test setup, data analysis, display, with test reports in and MS Word format.
- High resolution, no gap acquisition data storage to ensure that all data can be streamed to disk (in ASCII format if needed) for later review and replay of the actual test.
- Single Step and Fast playback mode of test results.
VTI Instruments
VTI Instruments, an AMETEK Programmable Power brand, provides products and systems which are used to monitor and record data that characterizes the physical integrity and performance of aircraft, engines, and other large structures, as well as automate the functional testing of complex electronic systems. VTI Instruments is recognized as an industry leader with a reputation of providing reliable data, first time, every time. A sustained focus on innovation and technology enables customers to optimize their capital investment through product longevity, while ensuring unmatched measurement integrity and data reliability.
VTI Instruments has customers in over 30 different countries and in a wide variety of industries including aerospace, defense, power generation, automotive and consumer electronics.
Contact Details
AMETEK Programmable Power, Inc. (VTI Instruments) − San Diego
9250 Brown Deer Road, San Diego, CA 92121, USA
Phone: 858-450-0085
Fax: 858-458-0267
Email: sales.ppd@ametek.com for general inquiries
Test & Measurement
Download Line Card
Document
