VTI Instruments - SMP6xxx Coaxial Switches, Stars and Trees
The SMP6xxx product family is made up of the SMP6001, SMP6002, SMP6004, SMP6005, SMP6006, SMP6101, SMP6102, SMP6103, SMP6122, SMP6144, SMP6202, SMP6301 (pictured), SMP6301T, and SM6306.
The SMP6xxx product family includes coaxial switches >900MHz (SMP6001 and SMP6002), 500MHz coaxial stars (SMP6004 and SMP6005), dual 250MHz high-volage 1x16 coaxial stars (SMP6006), coaxial switches >1.3 GHz (SMP6101, SMP6102, SMP6122, and SMP 6144), 75 Ω coaxial switches > 500MHz (SMP6202), and four self-terminated (1x4) coaxial trees >1.8 GHz (SMP6301 and SMP6301T).
VTI's SMIP™ signal switching series revolutionized the automated signal switching marketplace by providing a level of modularity, density, and performance for the VXIbus platform that was unprecedented.
The SMIPII family includes:
- Power (Switching greater than 2 A)
- General Purpose
- Multiplexers/Scanners
- Matrices
- RF
- Relay Drivers, Loads & Digital I/O
Configuring your switch system has never been easier.
Step 1: Start with the SMP1100 or SMP1200 base units.
Step 2: Select up to two switch modules for the SMP1100 or up to six for the SMP1200. Different switch modules can be mixed together for maximum flexibility.
Step 3: Select the appropriate mating connectors
|
SMP6001 |
10 (1x4) Coaxial Trees 900 MHz |
|---|---|
|
SMP6002 |
17 (1x2) Coaxial Switches 900 MHz |
|
SMP6004 |
3 (1x8) and 3 (1x2) Coaxial Stars 500 MHz |
|
SMP6005 |
8 (1x4) Star Switches 500 MHz |
|
SMP6006 |
2 (1x16) Hi-Voltage Star Switches >250 MHz |
|
SMP6101 |
10 (1x4) Coaxial Trees 1.3 GHz |
|
SMP6102 |
17 (1x2) Coaxial Switches 1.3 GHz |
|
SMP6103 |
1x31 RF Mux |
|
SMP6122 |
6 (2x2) Matrix 1.0 GHz |
|
SMP6144 |
1 (4x4) Matrix 1.0 GHz |
|
SMP6202 |
17 (1x2) Coaxial Switches - 75 Ohm Tree > 500 MHz |
|
SMP6301 |
4 (1x4) >1.8 GHz (SMB Connectors) |
|
SMP6301T |
4 (1x4) >1.8 GHz with 50 Ohm Termination (SMB Connectors) |
|
SM6306 |
1 X 4 (6) Coaxial Switch up to 3 GHz |
Document
More Product Information
- Eight ports of 8 I/O bits each
- High current capability for control of external relays, 300 mA sink
- Simulate and receive digital data at up to 2 MHz sample rates
- Selectable output voltages range from 3.3 V to 60 V
- Setup outputs and scan inputs as part of EX1200 measurement sequencing engine
The SMP1xxx product family is made up of the SMP1100 and the SMP1200 (pictured).
- Dual Voltage ranges that support over-voltage testing on 480V-based systems
- Separate terminal blocks for single-phase and three-phase AC power supply outputs
- High Power AC and DC Source
- Auto paralleling for higher power system expansion
- Single and three-phase modes
- Arbitrary & Harmonic Waveform Generation
- Standard LXI LAN, USB, and RS-232, Optional GPIB
- Step, list, and pulse voltage transients with down to 500usec resolution
- Complete avionics power quality test suites
- 15kVA to 1MVA Power Levels
- Intuitive 5” color display for ease of navigation
- Internationally accepted test routines for EMI/EMC, Safety Compliance
The SMP5xxx product family is made up of the SMP5001 through SMP5005 general purpose relays.
VXI Chassis include 6-slot VXIbus mainframes (CT-100C), 5-slot VXIbus mainframes (CT-310A), and modular 13-slot VXIbus mainframes (CT-400, pictured).
The SMP7500 is a 96-channel 300MA open-collector/relay drivers, and the SMP7600A (pictured) and SMP7600A-S-11351 are 5 W programmable loads.
- Highest resolution – 12 bits all the time
- More capability – integrates multiple instruments into one
- Comprehensive probe support – supports over 30 probes in 9 categories
- MAUI with OneTouch user interface for intuitive and efficient operation
Signal Generations, Arbitrary Waveform generation and Digital to Analog output modules for providing signal simulation capability
-
Provides an effectively noise free environment around the device under test (DUT)
-
World’s first probe station with integrated TestCell Power Management (a TestCell is a connected set of equipment, including test software, instruments, probe station, thermal system, and related measurement accessories such as cables and on-wafer probes)
-
Up to 4x faster flicker noise thermal testing on 30 μm pads
-
Provides dark and dry environment for measuring light sensitive transistors, and devices at negative temperatures (<= -60°C) with frost free operation
-
Provides fully managed and filtered AC power to the entire system – prober and instruments
-
Filters harmful noise generated by external thermal control systems
-
Reduced “antenna effect” injection of unwanted RF noise into the measurement path
-
Provide up to 100dB attenuation (50Hz to 80Mhz) with 100mA max DC current handling
-
Ultra-low, fA-level current and fF-level capacitance measurements from -65 °C to + 300 °C
-
Enables full access to the chuck and the auxiliary sites
-
Intuitive, and precise movement of chuck in X, Y, and Z-direction
-
User-centered design minimizes training costs and enhances efficiency
-
Test automation out-of-cassette for higher test cell efficiency for over-night/over-weekend operation
See more Key Features on Specifications & Details tab
VTI Instruments
VTI Instruments, an AMETEK Programmable Power brand, provides products and systems which are used to monitor and record data that characterizes the physical integrity and performance of aircraft, engines, and other large structures, as well as automate the functional testing of complex electronic systems. VTI Instruments is recognized as an industry leader with a reputation of providing reliable data, first time, every time. A sustained focus on innovation and technology enables customers to optimize their capital investment through product longevity, while ensuring unmatched measurement integrity and data reliability.
VTI Instruments has customers in over 30 different countries and in a wide variety of industries including aerospace, defense, power generation, automotive and consumer electronics.
Contact Details
AMETEK Programmable Power, Inc. (VTI Instruments) − San Diego
9250 Brown Deer Road, San Diego, CA 92121, USA
Phone: 858-450-0085
Fax: 858-458-0267
Email: sales.ppd@ametek.com for general inquiries
Test & Measurement
Download Line Card
