VTI Instruments - SMP1100/1200 Signal Switching in DC to RF frequency Single/Double slot base
The SMP1xxx product family is made up of the SMP1100 and the SMP1200 (pictured).
The base units for signal switching in DC to RF frequency ranges consist of the SMP1100 single-slot base unit and the SMP1200 double-slot base unit. The SMP1100 can house up to two high-density switch modules, and the SMP1200 can house up to six high-density switch modules.
Switch modules can be mixed and matched for flexibility and density. For example, scanners, multiplexers, power, general-purpose switches and RF cards can all be housed in a double-slot VXIbus card. Also a 1 x 768 one-wire multiplexer can be accommodated in a double-slot VXIbus card (SMP1200).
For maintainability and upgrades in the field, all switch modules are removable from the front panel.
The SMIPII family includes:
- Power (Switching greater than 2 A)
- General Purpose
- Multiplexers/Scanners
- Matrices
- RF
- Relay Drivers, Loads & Digital I/O
Configuring your switch system has never been easier.
Step 1: Start with the SMP1100 or SMP1200 base units.
Step 2: Select up to two switch modules for the SMP1100 or up to six for the SMP1200. Different switch modules can be mixed together for maximum flexibility.
Step 3: Select the appropriate mating connectors
|
SMP1100 |
Single-Slot Base Unit (Holds Two Switch Modules) |
|---|---|
|
SMP1200 |
Double-Slot Base Unit (Holds up to Six Switch Modules) |
More Product Information
-
Ideal for a wide range of applications such as RF, mm-Wave and sub-THz characterization, FA, DWC, MEMS, optoelectronic tests and WL
-
Re-configurable and upgradable as requirements grow
-
Minimizes setup times with no loss in performance or accuracy
-
Seamless integration of various measurement instruments
-
Solid station frame
-
Built-in vibration-isolation solution for superior vibration attenuation
-
Rigid microscope bridge
-
Compact and rigid mechanical design
-
Highly accurate measurement results
-
Incorporates best-known methods
-
Ergonomic and straightforward design for comfortable and easy operation
-
Low-profile design
-
Simple microscope operation
-
Quick and ergonomic change of DUT through pull-out stage
-
Minimize training efforts
-
Fast time to data
-
Convenient operation
Power switching up to 16A and high voltage mux cards
- Combine up to 12 fail-safe building blocks, dual SPDT, SP4T, SP6T, or transfer switch in a compact 1U footprint
- Front “pluggable” relays facilitate field maintenance
- Embedded web interface provides interactive utility to monitor and control relays from anywhere in the world
- Flexible API supports IVI and Linux development environments minimizing software investment
- LXI Trigger Event implementation provides seamless test synchronization with external devices
- Store up to 128 relay state configurations for quick recall, including an automatic power up state
- Define exclude lists to avoid setting an undesirable configuration
- Relay odometer tracks closures to facilitate preventative maintenance
The SMP3xxx product family is made up of the SMP3001, SMP3001DS, SMP3002, SMP3005, SMP3620 (pictured), and SMP3625.
- Highest resolution – 12 bits all the time
- More capability – integrates multiple instruments into one
- Comprehensive probe support – supports over 30 probes in 9 categories
- MAUI with OneTouch user interface for intuitive and efficient operation
- 4-Channel, 204.8 Ksa/s per channel, 24-Bit DACs
- -115 dB spurious free dynamic range
- Integrated 2-Channel 64-bit tachometer
- Integrated 4-Channel DIO
- Tight synchronization with DSA analyzers
- Ideal for rotational measurement, and stimulus-response applications such as vibration test
- Output modes including Sine, Burst Sine, Chirp, Burst-random and continuous random
RF/Coax switching modules up to 26 GHz for high frequency and communication switching needs
-
Provides an effectively noise free environment around the device under test (DUT)
-
World’s first probe station with integrated TestCell Power Management (a TestCell is a connected set of equipment, including test software, instruments, probe station, thermal system, and related measurement accessories such as cables and on-wafer probes)
-
Up to 4x faster flicker noise thermal testing on 30 μm pads
-
Provides dark and dry environment for measuring light sensitive transistors, and devices at negative temperatures (<= -60°C) with frost free operation
-
Provides fully managed and filtered AC power to the entire system – prober and instruments
-
Filters harmful noise generated by external thermal control systems
-
Reduced “antenna effect” injection of unwanted RF noise into the measurement path
-
Provide up to 100dB attenuation (50Hz to 80Mhz) with 100mA max DC current handling
-
Ultra-low, fA-level current and fF-level capacitance measurements from -65 °C to + 300 °C
-
Enables full access to the chuck and the auxiliary sites
-
Intuitive, and precise movement of chuck in X, Y, and Z-direction
-
User-centered design minimizes training costs and enhances efficiency
-
Test automation out-of-cassette for higher test cell efficiency for over-night/over-weekend operation
See more Key Features on Specifications & Details tab
- High power density in 1U / 2U / 4U / 14U chassis up to 18kVA
- Intuitive touch panel control
- Innovative iX2™ current doubling technology
- Multi-language display for global operation
- Auto paralleling for higher power
- Single phase 1U models and 1 or 3 phase selectable 2U / 4U / 14U models
- Complete avionic test suites (optional)
- ATE version available in 1U, 2U and 4U models
- Standard LXI LAN, USB and RS232, optional GPIB
- Legacy CSW5550 Emulation on the AST6003A1 Model
VTI Instruments
VTI Instruments, an AMETEK Programmable Power brand, provides products and systems which are used to monitor and record data that characterizes the physical integrity and performance of aircraft, engines, and other large structures, as well as automate the functional testing of complex electronic systems. VTI Instruments is recognized as an industry leader with a reputation of providing reliable data, first time, every time. A sustained focus on innovation and technology enables customers to optimize their capital investment through product longevity, while ensuring unmatched measurement integrity and data reliability.
VTI Instruments has customers in over 30 different countries and in a wide variety of industries including aerospace, defense, power generation, automotive and consumer electronics.
Contact Details
AMETEK Programmable Power, Inc. (VTI Instruments) − San Diego
9250 Brown Deer Road, San Diego, CA 92121, USA
Phone: 858-450-0085
Fax: 858-458-0267
Email: sales.ppd@ametek.com for general inquiries
Test & Measurement
Download Line Card
Document
