VTI Instruments - SMP500X product family General Purpose Relays
The SMP5xxx product family includes general purpose 2 A relays (SMP5001, SMP5002, and SMP5003) and general purpose 5 A relays (SMP5004 and SMP5005).
VTI's SMIP™ signal switching series revolutionized the automated signal switching marketplace by providing a level of modularity, density, and performance for the VXIbus platform that was unprecedented.
The SMIPII family includes:
- Power (Switching greater than 2 A)
- General Purpose
- Multiplexers/Scanners
- Matrices
- RF
- Relay Drivers, Loads & Digital I/O
Configuring your switch system has never been easier.
Step 1: Start with the SMP1100 or SMP1200 base units.
Step 2: Select up to two switch modules for the SMP1100 or up to six for the SMP1200. Different switch modules can be mixed together for maximum flexibility.
Step 3: Select the appropriate mating connectors
SMP5001 | 80 SPST Relays, 2 A Per Channel |
SMP5002 | 50 SPDT Relays, 2 A Per Channel |
SMP5003 | 26 (1x4) 2 A Switch Module |
SMP5004 | 30 SPDT 5A Relays |
SMP5005 | 48 SPST 5A, 220V Relays |
More Product Information
-
8 frequency counter channels, 16 isolated digital I/O channels, 2 isolated DAC channels in a single card
-
Single frequency measurement range that works from 0.05 Hz to 1 MHz
-
Very stable TCXO base clock, 50 MHz ±1 ppm
-
195 kΩ Input impedance with selectable coupling (AC/DC)
-
Wide differential input voltage range (±48 V) with up to 250 V working common mode voltage
-
Programmable threshold and hysteresis levels with 1 mV resolution
-
Support for quadrature encoder
-
Isolated DIO channels with up to 60 V compliance
-
Isolated and independent 16-bit DAC channels, configurable for voltage or current output
-
Dual Voltage ranges that support over voltage testing on 480V based systems
-
Instrument Setups for quickly re-establishing the known instrument state
-
500uS time resolution for Transients
-
Virtual Panels control software included
-
Non-Linear current waveform programming during Load mode
-
Phase coordination among multiple units (LKM/LKS)
-
Powerful set of analog controls for PHIL and Modulation tests
-
Trigger In & Out to permit extensive coordination with external systems
-
Extensive Onboard diagnostics
-
Digital I/O, including RS232, USB, Ethernet (GPIB optional)
-
Intuitive 5” color display for ease of navigation
-
Auto-paralleling for maximum flexibility with multi-chassis configurations
-
Separate terminal blocks for single phase and 3 phase outputs
-
Complete Test Solutions
-
Complete test solutions for emissions and immunity compliance testing of AC and DC powered products
-
-
Single & Three Phase Operation
-
Offers flexibility
-
-
Direct PC Bus Access
-
Provides high sampling rate and resolution for accurate measurements and high speed data transfers
-
-
PC based harmonic & flicker testing
-
provides real-time full color data display updates and continuous PASS/FAIL monitoring.
-
-
Supports Global Standards
-
Supports European and Japanese standards
-
-
Easy To Use Interface
-
Provides IEC test setup, data analysis, display, MS Word test reports, and data files are generated in MS Excel format
-
-
High resolution
-
Data storage to disk in for post-acquisition analysis and reporting
-
-
Single Step
-
Single Step and Fast Forward replay of recorded test data at 200 mSec
-
-
Intuitive, icon-based setup and control
-
Spreadsheet-style channel configuration
-
Snapshot display with data export
-
Independent sampling rates for each instrument
-
Real-time online graphical data analysis
-
Client / server architecture with multiple displays
-
Synchronization of different data sources
-
Detect/process events for close-loop control
-
Post-acquisition analysis methods and data playback
-
Easily create Virtual/Calculated channels based on physical channel data
-
16 integrated analog backplane lines
-
4-slot carrier plugs into a standard EX1208A series mainframe
-
Configure with either Resource or I/O matrix modules in any combination
-
1 or 2 pole switching options, up to 300 V/2 A
-
Typical bandwidths in excess of 20 MHz
-
Integrate with optional 6.5 Digit DMM across backplane
-
Up to 176 x 8 2-wire configuration in 4-slots, 704 x 8 in a single 3u mainframe
-
Pre-program hardware triggers to automate relay states and reduce cycle time
-
Backward Compatible with L Series
-
Function and bus compatible with the California Instruments L Series
-
-
Three phase and Single phase modes
-
Ideally suited for avionics and defense applications
-
-
3 KVA to 18 KVA Power Levels
-
Match power source and cost to application requirements
-
-
Transient Programming
-
Test products for susceptibility to AC line disturbances
-
-
Built-in Measurements
-
Performs voltage, current, and power measurements
-
-
Advanced Features
-
Arbitrary waveform generation, harmonic analysis, GPIB interface are some of the available options
-
-
Interface
-
Standard USB & RS232C interface.
-
Optional GPIB & LAN available
-
-
CE Marked (400V input model ONLY)
-
Safe, reliable, and consistent operation
-
Key Features Lx Series
-
Backward Compatible
-
Compatible with HP6834B & iL Series AC Sources Function & bus compatible with the Agilent HP6834B & California Instruments iL Series
-
-
Three phase and Single phase modes
-
Ideally suited for avionics and defense applications
-
-
3 KVA to 18 KVA Power Levels
-
Match power source and cost to application requirements
-
-
Arbitrary Waveform Generator
-
Test products for harmonics susceptibility
-
-
Built-in Power Analyzer
-
Performs voltage and load current harmonic analysis and waveform acquisition
-
-
Standard IEEE-488, USB & RS232
-
Remote control interface for ATE system integration include
-
VTI Instruments
VTI Instruments, an AMETEK Programmable Power brand, provides products and systems which are used to monitor and record data that characterizes the physical integrity and performance of aircraft, engines, and other large structures, as well as automate the functional testing of complex electronic systems. VTI Instruments is recognized as an industry leader with a reputation of providing reliable data, first time, every time. A sustained focus on innovation and technology enables customers to optimize their capital investment through product longevity, while ensuring unmatched measurement integrity and data reliability.
VTI Instruments has customers in over 30 different countries and in a wide variety of industries including aerospace, defense, power generation, automotive and consumer electronics.
Contact Details
AMETEK Programmable Power, Inc. (VTI Instruments) − San Diego
9250 Brown Deer Road, San Diego, CA 92121, USA
Phone: 858-450-0085
Fax: 858-458-0267
Email: sales.ppd@ametek.com for general inquiries