VTI Instruments - EX1200 Series General Purpose Switching Modules
- General purpose switching up to 300 V / 2 A
- Easy to use end-to-end path level switching for simplified programming
- Best bandwidth and crosstalk performance in its class
- Can be mixed and matched to create application specific configurations
- Ideal for general purpose switching of up to 300 V (AC/DC) or 2 A
- Can be used to switch a common point to either power or ground (Form C)
- Connect together using external wiring for flexible switch design
- Easy to use configuration software facilitates end-to-end path-level switching for simplified programming
Switching modules in SPST and SPDT configuration up to 80 channels and 5A of switching capability.
The EX1200-5001 (80 channels) is a high-density general purpose 2 A SPST switch modules designed or systems where individual relays can be used to route signals to/from the units under test (UUT) or combined externally to form user-defined configurations. These relays are commonly used to create complex signal distribution networks that can be reconfigured through different wiring in test adapters. Up to 480 SPST relays can be accommodated in a 1U full-rack mainframe for maximum density.
The EX1200-5002 is a high-density general purpose 2 A switch module designed for systems where individual relays can be used to route signals to/from the units under test (UUT) or combined externally to form user-defined configurations. These relays are commonly used to create complex signal distribution networks that can be reconfigured through different wiring in test adapters. For example, three relays on an EX1200-5002 module can be configured as a SP4T tree and seven relays can be configured as a SP8T tree. Up to 192 individual SPDT or 480 SPST relays can be accommodated in a full rack mainframe.
The EX1200-5006 (40 channels) is a general purpose 2 A SPST switch modules designed or systems where individual relays can be used to route signals to/from the units under test (UUT) or combined externally to form user-defined configurations. These relays are commonly used to create complex signal distribution networks that can be reconfigured through different wiring in test adapters. Up to 240 SPST relays can be accommodated in a 1U full-rack mainframe.
The EX1200-5007 is a general purpose 2 A switch module designed for systems where individual relays can be used to route signals to/from the units under test (UUT) or combined externally to form user-defined configurations. These relays are commonly used to create complex signal distribution networks that can be reconfigured through different wiring in test adapters. For example, three relays on an EX1200-5007 module can be configured as a SP4T tree and seven relays can be configured as a SP8T tree.
EX1200-5004:
- Switch signals up to 5 A
- Fail-safe interrupt forces relays to open in case of fault condition
- Ideal for hot switching general purpose signals up to 5 A
- Fail-safe interrupt forces relays open in case of external fault condition
- Integral shield attenuates noise and crosstalk between adjacent channels/modules
- Up to 192 individual SPDT relays in a 1U full-rack mainframe
- IVI Switch compliant drivers facilitate path level commands to simplify programming
The EX1200-5004 is a high-density 5 A switch module designed for switching applications such as process control, appliance pass/fail testing, and on/off control. Up to 192 individual SPDT relays can be accommodated in a 1U full-rack mainframe for maximum density. Since the EX1200-5004 is typically used to switch power to the device under test or interface panel, it will respond to a fail-safe interrupt signal provided through the EX1200 system general purpose digital I/O. By programming this module as a ‘listener’ to a fail-safe input, all relays can be forced to automatically open to instantly remove power from the UUT or interface in the event of an external fault condition.
|
EX1200-5001 |
80-Channel, 300 V/2 A, Form A (SPST) Switch |
|---|---|
|
EX1200-5002 |
32-Channel, 300 V/2 A, Form C (SPDT) Switch |
|
EX1200-5004 |
32-Channel, 5 A, Form C (SPDT) Switch |
|
EX1200-5006 |
40-Channel, 300 V/2 A, Form A (SPST) Switch |
|
EX1200-5007 |
12-Channel, 300 V/2 A, Form C (SPDT) Switch |
More Product Information
- Combine up to 12 fail-safe building blocks, dual SPDT, SP4T, SP6T, or transfer switch in a compact 1U footprint
- Front “pluggable” relays facilitate field maintenance
- Embedded web interface provides interactive utility to monitor and control relays from anywhere in the world
- Flexible API supports IVI and Linux development environments minimizing software investment
- LXI Trigger Event implementation provides seamless test synchronization with external devices
- Store up to 128 relay state configurations for quick recall, including an automatic power up state
- Define exclude lists to avoid setting an undesirable configuration
- Relay odometer tracks closures to facilitate preventative maintenance
The SMX-6xxx product family includes the SMX-6101 (pictured), SMX-6103, SMX-6106, SMX-6111, SMX-6115, SMX-6116, and SMX-6144.
- Direct PC bus access data acquisition system provides the required sampling rate and resolution to meet IEC 61000-4-7 measurement requirements and supports high-speed data transfers.
- PC-based Harmonic and Flicker test software provides real-time full-color data display updates and continuous PASS/FAIL monitoring.
- Automatic calculation of the maximum permissible system impedance Zsys, using the Zref and measured Flicker parameters, as required per EN/IEC 61000-3-11.
- Intuitive operating software provides IEC test setup, data analysis, display, with test reports in and MS Word format.
- High resolution, no gap acquisition data storage to ensure that all data can be streamed to disk (in ASCII format if needed) for later review and replay of the actual test.
- Single Step and Fast playback mode of test results.
The LXI mainframes family includes 2-slot, half-rack LXI switching and data acquisition mainframes (EX1202/EX1262), 16-slot, 3U LXI switching and data acquisition mainframes (EX1208A and EX1208B, pictured), and 6-slot, 1U LXI switching and data acquisition mainframes (EX1206A).
The SMX-7xxx product family is made up of a series of microwave switch cards.
- 96 digital lines configurable as either input or output
- Five available power supply rails for custom designs
- Mix and match with standard SMIP switching and digital I/O modules to create high density configurations
- VXI plug&play driver simplifies software development
- On-board connector header for simplified migration to PCB implementation
- Access to 16 MHz clock for use in complex designs
- Multiple front panel connector options
- 8 frequency counter channels, 16 isolated digital I/O channels, 2 isolated DAC channels in a single card
- Single frequency measurement range that works from 0.05 Hz to 1 MHz
- Very stable TCXO base clock, 50 MHz ±1 ppm
- 195 kΩ Input impedance with selectable coupling (AC/DC)
- Wide differential input voltage range (±48 V) with up to 250 V working common mode voltage
- Programmable threshold and hysteresis levels with 1 mV resolution
- Support for quadrature encoder
- Isolated DIO channels with up to 60 V compliance
- Isolated and independent 16-bit DAC channels, configurable for voltage or current output
-
Automatic calibration of instruments
-
In line with ISO17025 and other metrology standards
-
Automated optical readout module for multimeters
-
Unlimited custom instruments and procedures
- High-density, compact (1U) precision data acquisition instruments
- LXI™ LAN connectivity
- Fully integrated signal conditioning maximizes performance and accuracy
- Easily integrate thermocouples, voltages, RTDs, thermistors, frequency, strain and pressure on an per-channel basis
- Distributed, synchronized measurements over the wire
- Scalable architecture easily expands from tens to thousands of channels
- DC version available for test cells requiring closer proximity to test article
- End-to-end self-calibration ensures optimum runtime performance
- Web-based access for monitoring and control
- Exlab turnkey software for simplified setup, control and data display
VTI Instruments
VTI Instruments, an AMETEK Programmable Power brand, provides products and systems which are used to monitor and record data that characterizes the physical integrity and performance of aircraft, engines, and other large structures, as well as automate the functional testing of complex electronic systems. VTI Instruments is recognized as an industry leader with a reputation of providing reliable data, first time, every time. A sustained focus on innovation and technology enables customers to optimize their capital investment through product longevity, while ensuring unmatched measurement integrity and data reliability.
VTI Instruments has customers in over 30 different countries and in a wide variety of industries including aerospace, defense, power generation, automotive and consumer electronics.
Contact Details
AMETEK Programmable Power, Inc. (VTI Instruments) − San Diego
9250 Brown Deer Road, San Diego, CA 92121, USA
Phone: 858-450-0085
Fax: 858-458-0267
Email: sales.ppd@ametek.com for general inquiries
Test & Measurement
Download Line Card
Document
