Products
Displaying 649 - 660 of 786
DigRF v4 Decodes
Low-speed (26 Mb/s)
Medium-speed (1248 Mb/s)
High-speed (1456 Mb/s)
DigRF v3 Decodes
Low-speed (6.5 Mb/s)
Medium-speed (26 Mb/s)
High-speed (312 Mb/s)
Convert DigRF 3G and v4 I and Q digital data to corresponding analog waveforms
Correlate analog waveforms with protocol decode on one screen
View decoded data in hexadecimal format
Decode information expands as the time base is adjusted or zoomed
Convenient table display with quick “Zoom to byte” capability
Quick search capability for specific message packets
Compact probe head
Supports fine pitch SMD probing
Rugged, Sharp tip
HF optimized connection accessories
Over 30 accessories
Probe adapters provide simple and easy interface of third-party probes as well as change between the different Teledyne LeCroy Oscilloscope input and cable types (ProBus, ProLink, K/2.92 mm, BNC and SMA). Depending on the adapters, changing between the Teledyne LeCroy Oscilloscope's input type may have an effect on the overall performance of the channel.
Provides a passive PCIe® backplane for test applications
Self-contained, portable and self-powered
Supplies power for +3.3V, +3.3Vaux and +12V rails
Generates PCIe reference clock
Accepts external clock inputs
Generates valid PERST# bus reset that can be activated by manual push button
Includes two mid-bus probe footprints for traffic monitoring
Supports two PCIe x16 sockets which accept cards of any link width (x1, x4, x8, x16)
Provides indication of valid connection of PRSNT1# and PRSNT2# lines for each card
Supports data rates of 2.5 GT/s and 5.0 GT/s
Available in 30MHz, 40MHz, 60MHz, 80MHz, 120MHz, 200MHz, 350MHz and 500MHz models
All models feature 2 channels
Max Sampling rate of 150 Msa/s (30MHz & 60 MHz) 1.2 Gsa/s (40MHz, 80MHz, 120MHz) and 2.4 Gsa/s (200MHz, 350MHz and 500MHz) models.
Up to 16-bit vertical resolution (14-bit on 30MHz & 60MHz models).
All models have 4.3" Touchscreens.
Excellent analog and digital modulation types available (AM, DSB-AM, FM, PM, PSK, FSK, ASK and PWM)
150 MHz, 2 analog channels
8 synchronized digital channels (T3AWG2152-D only)
16-bit vertical resolution
128 MPts @Ch waveform memory
Max sampling rate of 600 MS/s
Available in 250 MHz and 350 MHz models
2, 4 and 8 channel modes
16-bit vertical resolution
Max Sampling rate of 1.2 GS/s
Max sinewave frequency of 250 MHz and 350 MHz respectively
Four operating modes: – CC, CV, CR, CP
Static, Dynamic and Sequence mode support
Built in Application Functions - Short Circuit Test, Battery Test Mode, CR-LED Mode, OCP and OPP Test
Provides a load of up to 300 Watts
Programmable and analog external control
All Digital IF technology
10.1” WVGA (1024 x 600) Display
Frequency range from 9 KHz up to 3.2 GHz
-161 dBm/Hz Displayed Average Noise Level (Typ)
-98 dBc/Hz @ 10 khz Offset Phase Noise (Typ)
Total Amplitude Accuracy < 0.7 dB
1 Hz Minimum Resolution Bandwidth (RBW)
Comes with Preamplifier
True Differential TDR with <3mm Spatial Resolution
Small Form Factor and Battery Powered
S Parameters up to 15 GHz
35 ps Rise Time
Up to 50,000 points long memory
Emerging Serial Data Standards Testing
Vector Network Analyzer Frequency Range from 10 MHz up to 3.2 GHz
Spectrum Analyzer Frequency Range from 9 kHz up to 3.2 GHz
-156 dBm/Hz Displayed Average Noise Level (Typ.)
-98 dBc/Hz @10 kHz Offset Phase Noise (1 GHz, Typ.)
Total Amplitude Accuracy < 1.2 dB
1 Hz Minimum Resolution Bandwidth (RBW)
All-Digital IF Technology
Standard Preamplifier
Distance to fault capability using VNA time domain analysis
Up to 1.5 GHz Tracking Generator Kit
Built-in Advanced Measurement capability (CHP, ACPR, OBW, CNR, TOI, etc)
10.1 lnch WVGA (1024 x 600) Display
Allows TekProbe interface level II probes to work with any ProBus-equipped Teledyne LeCroy oscilloscope
Automatic probe detection
Provides all necessary power and offset control to the attached probe
Supports probes up to 4 GHz
Easy firmware updates
Wide variety of probes supported including: Preamplifiers, Current Probes, Single-Ended Active Probes and Differential Active Probes