• Four operating modes: – CC, CV, CR, CP
• Static, Dynamic and Sequence mode support
• Built in Application Functions - Short Circuit Test, Battery Test Mode, CR-LED Mode, OCP and OPP Test 
• Provides a load of up to 300 Watts
• Programmable and analog external control

With the ProBus interface, the ZD500, 1000, and 1500 becomes an integral part of the oscilloscope. All probe gain and offset controls are transparent to the user, making it easier to probe the circuit without concern for which gain setting to choose. When used with a LeCroy digital oscilloscope, no external power supply is required.

• 500 MHz - 4 GHz bandwidths 
• Up to 40 GS/s sample rate 
• 15.4” capacitive touch screen 
• MAUI with OneTouch 
• Powerful, Deep Toolbox 
• Exceptional Serial Data Tools 
• 16 digital channels with 1.25 GS/s 
• Huge Applied Offset Range 
• Optional Application Packages

• All Digital IF technology 
• 10.1” WVGA (1024 x 600) Display 
• Frequency range from 9 KHz up to 3.2 GHz 
• -161 dBm/Hz Displayed Average Noise Level (Typ) 
• -98 dBc/Hz @ 10 khz Offset Phase Noise (Typ) 
• Total Amplitude Accuracy < 0.7 dB 
• 1 Hz Minimum Resolution Bandwidth (RBW) 
• Comes with Preamplifier

• Highest resolution - 12 bits all the time 
• Bigger Display, smaller footprint, most bench space 
• More capability, increased productivity

Transmission line probes are a special type of passive probe designed for use at very high frequencies. They replace the high impedance probe cable found in a traditional passive probe with a precision transmission line, with a characteristic impedance that matches the oscilloscope input (50 Ohm). This greatly reduces the input capacitance to a fraction of a picofarad, minimizing the loading of high frequency signals. A matching network at the tip increases the DC input resistance. While they have lower DC input resistance than a traditional passive probe (usually 500 Ohm) to 1kOhm), the input impedance of these probes remains nearly constant over their entire frequency range. A traditional /10 passive probe will have a 10 MOhm) input impedance at DC, however this impedance drops rapidly with frequency, passing below the input impedance of a transmission line probe at less than 100 MHz.

The PPE6KV-A and HVP120 can handle up to 6000 Vpeak transient overvoltages and are designed for probing up to 2000 Vrms and 1000 Vrms respectively. Fast rise times, excellent frequency response, and a variety of standard accessories make these probes safe and ideal for high voltage measurement applications

• 100 MHz, 200 MHz, 350 MHz, 500 MHz and 1 GHz bandwidths 
• Up to 4 GS/s sample rate 
• Long Memory – up to 20 Mpts 
• 10.1” capacitive touch screen display 
• 16 Digital Channel MSO option 
• MAUI - Most Advanced User Interface 
  • Designed for Touch 
  • Built for Simplicity 
  • Made to Solve 
• Advanced Anomaly Detection 
  • Fast Waveform Update 
  • History Mode - Waveform Playback 
  • WaveScan - Search and Find 
• Multi-Instrument Capabilities 
  • Protocol Analysis - Serial Trigger and Decode 
  • Waveform Generation - Built-in Function Generator 
  • Digital Voltmeter and Frequency Counter 
• Future Proof 
  • Upgradeable Bandwidth 
  • Field Upgradable Software and Hardware Options

• Vector Network Analyzer Frequency Range from 10 MHz up to 3.2 GHz 
• Spectrum Analyzer Frequency Range from 9 kHz up to 3.2 GHz 
• -156 dBm/Hz Displayed Average Noise Level (Typ.) 
• -98 dBc/Hz @10 kHz Offset Phase Noise (1 GHz, Typ.) 
• Total Amplitude Accuracy < 1.2 dB 
• 1 Hz Minimum Resolution Bandwidth (RBW) 
• All-Digital IF Technology 
• Standard Preamplifier 
• Distance to fault capability using VNA time domain analysis 
• Up to 1.5 GHz Tracking Generator Kit 
• Built-in Advanced Measurement capability (CHP, ACPR, OBW, CNR, TOI, etc) 
• 10.1 lnch WVGA (1024 x 600) Display