Teledyne LeCroy - Active Voltage Probes
The ZS Series probes provide high impedance and an extensive set of probe tips and ground accessories to handle a wide range of probing scenarios. The high 1 MΩ input resistance and low 0.9 pF input capacitance means this probe is ideal for all frequencies. The ZS Series probes provide full system bandwidth with all Teledyne LeCroy oscilloscopes with bandwidths of 4 GHz and lower.
Engineers must commonly probe high-frequency signals with high signal fidelity. Typical passive probes with high input R and C provide good response at lower frequencies, but inappropriately load the circuit, and distort signals, at higher frequencies. Active voltage probes feature both high input R and low input C to reduce circuit loading across the entire probe/oscilloscope bandwidth. With low circuit loading, and a form factor that allows probing in confined areas, the active voltage probe becomes the everyday probe for all different types of signals and connection points.
|
Model |
Bandwidth |
Input R |
Input C |
Dynamic Range |
OffsetRange |
Interface |
|---|---|---|---|---|---|---|
|
ZS1000 |
1 GHz |
1 MΩ |
0.9 pF |
± 8 V |
NA |
ProBus |
|
ZS1500 |
1.5 GHz |
1 MΩ |
0.9 pF |
± 8 V |
± 12 V |
ProBus |
|
ZS2500 |
2.5 GHz |
1 MΩ |
0.9 pF |
± 8 V |
± 12 V |
ProBus |
|
ZS4000 |
4 GHz |
1 MΩ |
0.6 pF |
± 8 V |
± 12 V |
ProBus |
More Product Information
- High speed up to 100 kHzx3 line rate (Mono) or 300 kHz line rate (Color)
- RGB native colors (Color)
- Independent exposure control (Color)
- Subpixel spatial correction (Color)
- Sequential exposure control (Mono)
- High dynamic range (Mono)
- Up to 100 m optical cable length
Single phase electric power/energy calibrator for calibration and testing of power meters and power transducers. Terminals 2 and 3 are inactive.
- 0.01° phase shift accuracy
- 15 - 1000 Hz output
- Built-in multimeter for transducer calibration
- Floating current output for 3-wire power meters
- Voltage from Current function
ProPhotonix designs and manufactures easy to use, plug and play laser diode modules for a wide range of laser applications including uniform laser lines and DOE patterns for machine vision and rugged laser modules for industrial alignment applications. ProPhotonix also partners with leading manufacturers to develop laser modules for life science applications, scientific instrumentation, particle measurement, 3D printing and more.
Diode laser modules are available in a wide variety of wavelengths, output powers, beam shapes and with a variety of electronic functionality and form factors. Wavelengths from 405nm laser to 1300nm laser are available with maximum output power up to 2W. Circular and elliptical spot, Gaussian and uniform lines and various diffractive optical patterns are also available. In terms of electronics, ProPhotonix can offer CW, pulsed or TTL modulation options. Temperature stabilized (TE cooled) laser modules are also possible.
To find the laser module range that best suits your application, try the Laser Module Selector below. Simply enter your specification criteria to see suitable laser modules. Click on the results to go to that specific page where you can download relevant datasheets.
- V4A, AISI 316L Stainless Steel (apart from hygienic standard mounts).
- IP69k ingress protection rating for high pressure cleaning up to 100 bar, dual seal system for additional safety.
- Most stringent hygienic design for use in direct food contact and dripping areas, EHEDG Certification in progress.
- All seal materials, protective tubes and acrylic windows with FDA approval.
- All enclosure materials tested according to ECOLAB standards with aggressive cleaning agents (Topactive 200/ 500/ OCTO, P3 Topax 66/ 990).
- Flexible vibration proof camera mount inside the enclosure with very good heat dissipation.
- Flexible mounting of camera enclosure.
- Different rear and side exit versions and mounting accessories available.
-
Compact 2 MP camera
-
Robust metal housing
-
Sony ICX274
-
Optocoupled I/Os
-
Various IR cut/pass filters
-
White medical housing
WaveMaster 8000HD is the only high speed oscilloscope designed for all stages of product development, whether first-silicon characterization, link validation over channels, or debugging across the entire the protocol stack. No other high speed oscilloscope supports more engineering tasks with more unique tools.
- Exceptional signal characterization performance
- Unrivaled validation and debug capabilities
- Comprehensive serial data expertise
- S-parameters DC to 40 GHz, single-ended and mixed-mode
- Impedance Profile with <1 mm resolution, differential and common-mode
- Internal, automatic OSLT calibration
- USB-connected, small, lightweight
- Flexible display of the measurements
- Remove effects from fixtures, connectors and cables
- Emulate eye diagrams with CTLE, DFE and FFE equalization
- Advanced jitter analysis
- 100 MHz, 200 MHz, 350 MHz, 500 MHz and 1 GHz bandwidths
- Up to 4 GS/s sample rate
- Long Memory – up to 20 Mpts
- 10.1” capacitive touch screen display
- 16 Digital Channel MSO option
- MAUI - Most Advanced User Interface
- Designed for Touch
- Built for Simplicity
- Made to Solve
- Advanced Anomaly Detection
- Fast Waveform Update
- History Mode - Waveform Playback
- WaveScan - Search and Find
- Multi-Instrument Capabilities
- Protocol Analysis - Serial Trigger and Decode
- Waveform Generation - Built-in Function Generator
- Digital Voltmeter and Frequency Counter
- Future Proof
- Upgradeable Bandwidth
- Field Upgradable Software and Hardware Options
AI, cloud computing, and hyperscalers are accelerating the demand for ultra-high-speed, low-latency connectivity, taking us past Gigabit Ethernet and into the era of Terabit Ethernet.
Teledyne LeCroy’s Terabit Ethernet solutions are engineered to help you take full advantage of this new technology cycle. The Xena Ethernet Test Platform gives developers of semiconductor, NEMs, and hyperscalers the solutions they need to validate next-gen silicon, network devices, and interconnects with confidence.
From Layer 1 signal integrity and Layer 2 traffic generation and analysis, we have the solutions you need to simulate, stress, and certify real-world performance. Support for 224Gbps electrical lanes, advanced FEC, and PCS diagnostics ensure readiness for tomorrow’s networks. Compact, desktop-friendly hardware combined with intuitive software and powerful automation ensure seamless lab-to-production workflows.
Whether you’re path-finding 1.6T or optimizing 800G deployments, Xena can fast-track your innovation cycle. Test smarter, deploy faster and reap the rewards.
Teledyne LeCroy
Website
12bit MSO's 40 Mhz to 100 GHz, Probes, Series Network & Logic Analyzers
