Teledyne DALSA - Piranha4 High Performance CMOS Line Scan Imagers - For Maximum Throughput
- High speed 120 kHz, high resolution 28 μm or 900 dpi
- No missing or interpolated pixels
- Exposure control
- Mono/HDR mode
- Precalibrated pixel size for metrology applications
- Camera Link HS fibre interface
Powered by our high performance CMOS line scan imagers, the Piranha4 offers resolutions from 2k to 8k pixels in a variety of pixel sizes to let you inspect and detect with unrivalled precision, speed, and responsivity.
Raising the performance bar once again
Powered by our latest high performance CMOS line scan imagers, the Piranha4 offers resolutions from 2k to 8k pixels in a variety of pixel sizes to let you inspect and detect with unrivalled precision, speed, and responsivity.
High performance color, advanced features, and programmability
The Piranha4 cameras offer advanced features such as sub-pixel spatial correction, areas of interest (up to 4 at a time) to reduce data processing and simplify cabling, as well as dual-line area mode to double line rate, HDR mode, shading and lens correction. The Piranha4 is built for the real world with features to ease system integration. The advanced GenICam compliant user interface makes it easy to set up and control camera parameters such as exposure control, FFC, white balance, gain, test patterns, diagnostics and more.
High line rates
Our unique CMOS line scan architectures include dual line scan monochrome to deliver a 2x increase in responsivity, as well as bilinear, trilinear, and quadlinear color designs to maximize color performance. Large full-well capacity maximizes signal coverage for bright light, while low read noise ensures superior signal-to-noise at low light. Our CMOS image sensors' high dynamic range, combined with on-chip ADC for high speed, gives the Piranha4 cameras unprecedented performance.
Family Specifications
|
Camera Type |
Line Scan |
|---|---|
|
Sensor Technology |
CMOS |
|
Supported Interfaces |
Camera Link |
|
Spectrum Capability |
Visible (400-700 nm), Near Infrared (700-1000 nm) |
Models
|
Model Number |
Resolution |
Spectrum |
Interface |
Pixel Size (μm) |
Max Line Rate |
|---|---|---|---|---|---|
|
2048 x 2 |
Mono |
Camera Link |
10.56 |
200 kHz |
|
|
2048 x 2 |
Mono |
Camera Link |
10.56 |
100 kHz |
|
|
4096 x 2 |
Mono |
Camera Link |
10.56 |
200 kHz |
|
|
4096 x 2 |
Mono |
Camera Link |
10.56 |
100 kHz |
|
|
8192 x 2 |
Mono |
Camera Link |
7.04 |
70 kHz |
|
|
2048 x 3 |
Color |
Camera Link |
14.08 |
40 kHz |
|
|
2048 x 3 |
Color |
Camera Link |
14.08 |
70 kHz |
|
|
4096 x 3 |
Color |
Camera Link |
10.56 |
40 kHz |
|
|
4096 x 3 |
Color |
Camera Link |
10.56 |
70 kHz |
|
|
8192 x 2 |
Color |
Camera Link |
7.04 |
50 kHz |
|
|
8192 x 3 |
Color |
Camera Link |
7.5 |
33 kHz |
More Product Information
- High resolution global shutter CMOS sensor
- 3 resolution models – 2M, 3M and 5M
- Dual core 1.5 GHz processor
- Embedded application software
- Ease-to-use setup for new vision adopters
- Built-in vision capabilities for most applications
- Standard factory protocols (EthernetIP, Modbus, Profinet)
- Operator interface flexibility
- Gigabit Ethernet and RS232 communications
- Isolated I/O and direct lamp connections
- Integrated ring light (optional on 2M version only)
- IP67 enclosure with lens cap
- Convenient mounting options
- Standard M12 cables
- High speed 120 kHz, high resolution 28 μm or 900 dpi
- No missing or interpolated pixels
- Exposure control
- Mono/HDR mode
- Precalibrated pixel size for metrology applications
- Camera Link HS fibre interface
- Reduced dark noise levels and improved dark offset
- Improved sensitivity, including NIR response
- In-camera image pre-processing (lens shading correction, pixel correction)
- Large full well when using in-sensor binning >142Ke
- Thousands of frames per second in Partial Scan Mode (ROI)
- Multi-ROI support (up to 32 ROI) and Cycling Mode
- Advanced Sequencer functions of different features
-
Easy to Use
-
No need to break the circuit or insert a shunt
-
Small form factors for use on crowded boards
-
-
Variety of Applications
-
Bandwidths up to 100 MHz
-
Peak currents up to 700 A
-
Sensitivities down to 1mA/div
-
-
High Precision Measurements
-
Low frequency accuracy of 1%
-
Integrated autozero capability
-
-
Fully Integrated with Teledyne LeCroy Oscilloscope
-
No additonal hardware is required
-
Power is supplied from oscilloscope ProBus connection
-
Automatic display of waveforms in Amps and calculated power traces scaled correctly in Watts
-
Degauss and Autozero directly from oscilloscope user interface
-
-
DCS025 Deskew Calibration Source
-
Provides ability to precisely deskew most voltage probes along with 30, 150 and 500A current probes
-
- Long cable lengths at maximum image acquisition rates
- Data forwarding rate for distributed image processing
- Fully supported by Sapera Vision Software SDKs
- Up to 65 GHz
- Up to 80 Channels @ 36 GHz
- Up to 160 GS/s
- Up to 512 Mpts/Ch
- 50 fs rms Sample Clock (Intrinsic) Jitter
- Jitter Between All Channels of <130 fs rms
- Four operating modes: – CC, CV, CR, CP
- Static, Dynamic and Sequence mode support
- Built in Application Functions - Short Circuit Test, Battery Test Mode, CR-LED Mode, OCP and OPP Test
- Provides a load of up to 300 Watts
- Programmable and analog external control
- Uses standard PC Ethernet port & hardware
- Supports cable lengths up to 100 m (CAT-5e or CAT-6)
- Simplified set-up with field proven Sapera LT software featuring CamExpert
- Engineered to accommodate industrial environment with a ruggedized screw mount RJ-45 connector
High voltage differential probes provide high CMRR over a broad frequency range to simplify the measurement challenges found in noisy, high common-mode power electronics environments. The probe’s design is easy-to-use and enables safe, precise high voltage floating measurements.
Teledyne DALSA
Teledyne DALSA is an international leader in high performance digital imaging and semiconductors with approximately 1000 employees world-wide. Established in 1980 and acquired by Teledyne Technologies in 2011, Teledyne DALSA designs, develops, manufactures, and markets digital imaging products and solutions, in addition to providing semiconductor products and services. Our core competencies are in specialized integrated circuit and electronics technology, software, and highly engineered semiconductor wafer processing.
Teledyne DALSA exists for the long term. Our goal is to build upon our 30 year heritage of developing the world's leading high performance digital imaging and semiconductor solutions and to accelerate our level of innovation. We focus on R&D development but also draw on the capabilities available to us as part of a larger organization. We seek to deliver products and technology that are truly innovative so that we can help our customers succeed.
Contact Details
Teledyne DALSA Headquarters
605 McMurray Road, Waterloo, Ontario, Canada N2V 2E9
Phone: 519-886-6000
Fax: 519-886-8023
Imaging/Machine Vision
Download Line Card
