Teledyne LeCroy - ZD500 500 MHz, 1.0 pF Active Differential probe
With the ProBus interface, the ZD500, 1000, and 1500 becomes an integral part of the oscilloscope. All probe gain and offset controls are transparent to the user, making it easier to probe the circuit without concern for which gain setting to choose. When used with a LeCroy digital oscilloscope, no external power supply is required.
Wide Dynamic Range
The ZD500, 1000, 1500 probes provides transparent probe attenuation so signals are always optimized for the display. The differential range is 18 Vp-p with a differential offset of ±8 and common mode range of ±10 V, making this versatile for every probing application.
Wide Applications
The wide dynamic range of 16 Vp-p and offset range of ±8 suit this probe to a wide range of applications and signal types. The ZD differential probes are ideally suited for Automotive, Serial Data, power, and general purpose use. The differential input capacitance is only 1 pF to minimize loading distortion on the highest frequency signals under test. System noise of only 4 mVrms allows accurate measurement of the smallest signals.
A Variety of Probe Tips for Varied Tasks
Engineers often need to probe a variety of different test points in confined spaces. The extensive range of standard tip accessories for the ZD Series of probes ensures that this probe can meet any difficult probing challenge.
Innovative Probe Leads and Tips Provide Excellent Signal Performance Without Degradation
Probing with long leads or accessories is sometimes necessary to reach the test points, but it comes at the expense of reduced bandwidth, increased capacitance, and added noise. The ZD accessories are engineered to provide the best signal fidelity without ringing or distortions commonly introduced with tip accessories.
|
Specifications |
|
|---|---|
|
Bandwidth (Warranted) |
500 MHz |
|
Bandwidth (Typical) |
650 MHz |
|
Risetime 10–90% (Typical) |
650 ps |
|
Risetime 20–80% (Typical) |
500 ps |
|
LF Attenuation Accuracy (Warranted) |
2% |
|
Zero Offset (Typical) (within 15 minutes after autozero) |
5 mV |
|
System Noise (Typical) |
1.75 mVrms |
|
Probe Noise Density (Typical) |
38 nV/rt (Hz) |
|
Input Differential Range (Nominal) |
±8 V (16 Vp-p) |
|
Differential Offset Range (Nominal) |
±18 V |
|
Offset Gain Accuracy (Typical) |
2% |
|
Common Mode Range (Nominal) |
±10 V |
|
Maximum Non-destruct Voltage (Nominal) |
30 V |
|
CMRR (Typical) |
60 dB 50/60 Hz 30 dB 20 MHz 25 dB @ 500 MHz |
|
DC Input Resistance (Nominal) |
50 kΩ (Common Mode) 120 kΩ (Differential Mode) |
|
Differential Input Capacitance (Typical) |
< 1.0 pF |
More Product Information
With the ProBus interface, the ZD500, 1000, and 1500 becomes an integral part of the oscilloscope. All probe gain and offset controls are transparent to the user, making it easier to probe the circuit without concern for which gain setting to choose. When used with a LeCroy digital oscilloscope, no external power supply is required.
- High speed 120 kHz, high resolution 28 μm or 900 dpi
- No missing or interpolated pixels
- Exposure control
- Mono/HDR mode
- Precalibrated pixel size for metrology applications
- Camera Link HS fibre interface
- 2, 4 and 8 channel configurations
- 16-bit vertical resolution
- Sample Rate up to 12.32 GS/s with RF mode
- 16-bit vertical resolution.
- 4 Gpts waveform memory per channel
- Up to 5 Vpp Output Voltage and ±2.5 V Baseline Offset 50 Ohm
-
Teledyne e2v Sapphire CMOS sensor
-
Switchable shutter modes
-
Power over Ethernet
-
60 fps at full resolution
-
Monochrome (G-192B) and color (G-192C) models
-
GigE Vision interface with Power over Ethernet
-
Screw mount RJ45 Ethernet connector for secure operation in industrial environments
-
Supports cable lengths up to 100 meters (CAT-6 recommended)
-
Comprehensive I/O functionality for simplified system integration
-
Popular C-Mount lens mount
-
Easy camera mounting via standard M3 threads on top and bottom of housing or optional tripod adapter
-
Easy software integration with Allied Vision's Vimba Suite and compatibility to the most popular third party image-processing libraries.
-
Defect pixel masking feature with the Defect Mask Loader tool that allows you to manage a user defined defective pixel list to match your application and optimize the life cycle of the camera.
-
Select between B 270 ASG protection glass and filter types: Jenofilt 217 IR cut filter, Hoya C-5000 IR cut filter, RG715 IR pass filter, or RG830 IR pass filter
- Uses standard PC Ethernet port & hardware
- Supports cable lengths up to 100 m (CAT-5e or CAT-6)
- Simplified set-up with field proven Sapera LT software featuring CamExpert
- Engineered to accommodate industrial environment with a ruggedized screw mount RJ-45 connector
AI, cloud computing, and hyperscalers are accelerating the demand for ultra-high-speed, low-latency connectivity, taking us past Gigabit Ethernet and into the era of Terabit Ethernet.
Teledyne LeCroy’s Terabit Ethernet solutions are engineered to help you take full advantage of this new technology cycle. The Xena Ethernet Test Platform gives developers of semiconductor, NEMs, and hyperscalers the solutions they need to validate next-gen silicon, network devices, and interconnects with confidence.
From Layer 1 signal integrity and Layer 2 traffic generation and analysis, we have the solutions you need to simulate, stress, and certify real-world performance. Support for 224Gbps electrical lanes, advanced FEC, and PCS diagnostics ensure readiness for tomorrow’s networks. Compact, desktop-friendly hardware combined with intuitive software and powerful automation ensure seamless lab-to-production workflows.
Whether you’re path-finding 1.6T or optimizing 800G deployments, Xena can fast-track your innovation cycle. Test smarter, deploy faster and reap the rewards.
- Allows TekProbe interface level II probes to work with any ProBus-equipped Teledyne LeCroy oscilloscope
- Automatic probe detection
- Provides all necessary power and offset control to the attached probe
- Supports probes up to 4 GHz
- Easy firmware updates
- Wide variety of probes supported including: Preamplifiers, Current Probes, Single-Ended Active Probes and Differential Active Probes
- Available in 250 MHz and 350 MHz models.
- 2, 4 and 8 channel modes.
- 16-bit vertical resolution.
- Max Sampling rate of 1.2 GS/s.
- Max sinewave frequency of 250 MHz and 350 MHz respectively.
The disruptive and innovative architecture enables to generate/add 8, 16 or 32 channel digital patterns (respectively on 2,4 or 8 analog channels platform) and to operate all models in true arbitrary mode or Direct Digital Synthesis (DDS) mode. Thanks to their high performance, versatile functionality and outstanding usability, the HD T3AWG3K series is the ideal AWG generator for today's and tomorrow's test challenges.
- Highest resolution – 12 bits all the time
- More capability – integrates multiple instruments into one
- Comprehensive probe support – supports over 30 probes in 9 categories
- MAUI with OneTouch user interface for intuitive and efficient operation
Teledyne LeCroy
Website
12bit MSO's 40 Mhz to 100 GHz, Probes, Series Network & Logic Analyzers
