Teledyne LeCroy - WaveRunner 8000HD 350 MHz - 2 GHz High Definition Oscilloscopes
- Highest resolution – 12 bits all the time
- More channels, flexibility – 8 analog and 16 digital channels
- Longest Memory – 5 Gpt records with simple navigation – no compromise
- View 16 channels on one display with OscilloSYNC™
- Powerful, deep toolbox enables and simplifies complex analysis
- MAUI with OneTouch user interface for intuitive and efficient operation
- Zone Trigger – Simple Triggering for Complex Signals
Providing 12 bits all the time, more channels than any other oscilloscope, and long memory without tradeoffs – the WaveRunner 8000HD 8 channel oscilloscope captures every detail.
HD4096 – 12 Bits All the Time, 16 x Closer to Perfect
Teledyne LeCroy high definition 12-bit oscilloscopes use unique HD4096 technology to provide superior and uncompromised measurement performance. HD4096 technology provides the highest resolution and lowest noise at full bandwidth—12 bits all the time with no compromise.
More Channels, More Flexibility
The WaveRunner 8000HD 8 channel oscilloscopes are the only oscilloscopes to offer 8 analog channels and 16 digital channels, allow synchronization of two 8-channel systems, and not penalize you for using a digital channel. Other oscilloscopes require that you trade a valuable analog channel in exchange for digital inputs.
16 Channels with OscilloSYNC
View and control 16 analog channels on a single display with OscilloSYNC technology – just like having a single 16-channel acquisition system. Setup is incredibly easy with four simple steps. The activation key can be downloaded at no charge from: teledynelecroy.com/redeem/OscilloSYNC
Longest Memory, Simple Navigation
With up to 5 Gpts of acquisition memory, WaveRunner 8000HD 8 channel, 12-bit oscilloscopes capture long periods of time, yet maintain high sample rate for visibility into the smallest details. WaveRunner 8000HD can acquire 500 ms of data at the full 10 GS/s sample rate - and always with 12 bits of resolution.
3-Phase Power Conversion Testing
WaveRunner 8000HD 8 channel, 12-bit oscilloscopes deliver 8 analog channels (16 with OscilloSYNC), 3-phase power analysis software, and high performance probes for inverter subsection, power system and control testing.
Automotive Electronics Testing
WaveRunner 8000HD 8 channel, 12-bit oscilloscopes combine a high channel count, long memory, and wide range of validation and debug software to best address the specific test needs of the automotive industry.
Power Integrity and Power Sequencing Test
WaveRunner 8000HD 8 channel, 12-bit oscilloscopes' high resolution, long memory and high channel count let you validate and debug all aspects of power supply, delivery and consumption - for complete confidence.
Deeply Embedded Computing Systems Testing
WaveRunner 8000HD 8 channel, 12-bit oscilloscopes acquire the longest records at the highest resolution for the most comprehensive deeply embedded computing system analysis (analog, digital, serial data and sensor).
|
Main Specifications |
|
|---|---|
|
Bandwidth |
350 MHz - 2 GHz |
|
Max Sampling Rate |
10 GS/s |
|
Input Channels |
8 |
|
Resolution |
12-bit |
|
Memory |
50 Mpts - 5 Gpts |
|
Max Memory |
5 Gpts |
|
WaveRunner 8038HD (350 MHz Bandwidth, 8 Input Channels, 50 Mpts/ch, 10GS/s) |
|
|---|---|
|
Bandwidth |
350 MHz |
|
Sampling Rate |
10 GS/s on 8 Ch with ESR |
|
Maximum Acquisition Memory |
5 Gpts (2 Ch operation) |
|
Input Channels |
8 |
|
Vertical Resolution |
12 bits |
|
WaveRunner 8058HD (500 MHz Bandwidth, 8 Input Channels, 50 Mpts/ch, 10GS/s) |
|
|---|---|
|
Bandwidth |
500 MHz |
|
Sampling Rate |
10 GS/s on 8 Ch with ESR |
|
Maximum Acquisition Memory |
5 Gpts (2 Ch operation) |
|
Input Channels |
8 |
|
Vertical Resolution |
12 bits |
|
WaveRunner 8108HD (1 GHz Bandwidth, 8 Input Channels, 50 Mpts/ch, 10GS/s) |
|
|---|---|
|
Bandwidth |
1 GHz |
|
Sampling Rate |
10 GS/s on 8 Ch with ESR |
|
Maximum Acquisition Memory |
5 Gpts (2 Ch operation) |
|
Input Channels |
8 |
|
Vertical Resolution |
12 bits |
|
WaveRunner 8208HD (2 GHz Bandwidth, 8 Input Channels, 50 Mpts/ch, 10GS/s) |
|
|---|---|
|
Bandwidth |
2 GHz |
|
Sampling Rate |
10 GS/s on 8 Ch with ESR |
|
Maximum Acquisition Memory |
5 Gpts (2 Ch operation) |
|
Input Channels |
8 |
|
Vertical Resolution |
12 bits |
Document
More Product Information
- Supports PCI Express Rev 2.0 x4 or higher, backwards compatible with PCIe Rev 1.10 slots
- Up to 512MB of high-speed image memory
- Single slot solution with reconfigurable camera control and general purpose input/outputs
With the ProBus interface, the ZD500, 1000, and 1500 becomes an integral part of the oscilloscope. All probe gain and offset controls are transparent to the user, making it easier to probe the circuit without concern for which gain setting to choose. When used with a LeCroy digital oscilloscope, no external power supply is required.
- Highest resolution – 12 bits all the time
- More capability – integrates multiple instruments into one
- Comprehensive probe support – supports over 30 probes in 9 categories
- MAUI with OneTouch user interface for intuitive and efficient operation
- Four operating modes: – CC, CV, CR, CP.
- Static, Dynamic and Sequence mode support.
- Built in Application Functions - Short Circuit Test, Battery Test Mode, CR-LED Mode, OCP and OPP Test.
- Provides a load of up to 300 Watts.
- Programmable and analog external control.
-
Teledyne e2v Sapphire CMOS sensor
-
Switchable shutter modes
-
Power over Ethernet
-
60 fps at full resolution
-
Monochrome (G-192B) and color (G-192C) models
-
GigE Vision interface with Power over Ethernet
-
Screw mount RJ45 Ethernet connector for secure operation in industrial environments
-
Supports cable lengths up to 100 meters (CAT-6 recommended)
-
Comprehensive I/O functionality for simplified system integration
-
Popular C-Mount lens mount
-
Easy camera mounting via standard M3 threads on top and bottom of housing or optional tripod adapter
-
Easy software integration with Allied Vision's Vimba Suite and compatibility to the most popular third party image-processing libraries.
-
Defect pixel masking feature with the Defect Mask Loader tool that allows you to manage a user defined defective pixel list to match your application and optimize the life cycle of the camera.
-
Select between B 270 ASG protection glass and filter types: Jenofilt 217 IR cut filter, Hoya C-5000 IR cut filter, RG715 IR pass filter, or RG830 IR pass filter
Transmission line probes are a special type of passive probe designed for use at very high frequencies. They replace the high impedance probe cable found in a traditional passive probe with a precision transmission line, with a characteristic impedance that matches the oscilloscope input (50 Ohm). This greatly reduces the input capacitance to a fraction of a picofarad, minimizing the loading of high frequency signals. A matching network at the tip increases the DC input resistance. While they have lower DC input resistance than a traditional passive probe (usually 500 Ohm) to 1kOhm), the input impedance of these probes remains nearly constant over their entire frequency range. A traditional /10 passive probe will have a 10 MOhm) input impedance at DC, however this impedance drops rapidly with frequency, passing below the input impedance of a transmission line probe at less than 100 MHz.
- 100 MHz, 200 MHz, 350 MHz, 500 MHz and 1 GHz bandwidths
- Up to 4 GS/s sample rate
- Long Memory – up to 20 Mpts
- 10.1” capacitive touch screen display
- 16 Digital Channel MSO option
- MAUI - Most Advanced User Interface
- Designed for Touch
- Built for Simplicity
- Made to Solve
- Advanced Anomaly Detection
- Fast Waveform Update
- History Mode - Waveform Playback
- WaveScan - Search and Find
- Multi-Instrument Capabilities
- Protocol Analysis - Serial Trigger and Decode
- Waveform Generation - Built-in Function Generator
- Digital Voltmeter and Frequency Counter
- Future Proof
- Upgradeable Bandwidth
- Field Upgradable Software and Hardware Options
- 10 GigE Ethernet port & hardware
- Industry’s smallest 67M 10GigE Vision camera
- Simplified set-up with field proven Sapera LT software featuring CamExpert
- Engineered to accommodate industrial environment with a ruggedized screw mount RJ-45 connector
- Compact probe head
- Supports fine pitch SMD probing
- Rugged, sharp tip
- HF optimized connection accessories
- Over 30 accessories
- Low input capacitance
Teledyne LeCroy
Website
12bit MSO's 40 Mhz to 100 GHz, Probes, Series Network & Logic Analyzers
