Teledyne LeCroy - ZD1500 1.5 GHz, 1.0 pF Active Differential probe
With the ProBus interface, the ZD500, 1000, and 1500 becomes an integral part of the oscilloscope. All probe gain and offset controls are transparent to the user, making it easier to probe the circuit without concern for which gain setting to choose. When used with a LeCroy digital oscilloscope, no external power supply is required.
Wide Dynamic Range
The ZD500, 1000, 1500 probes provides transparent probe attenuation so signals are always optimized for the display. The differential range is 18 Vp-p with a differential offset of ±8 and common mode range of ±10 V, making this versatile for every probing application.
Wide Applications
The wide dynamic range of 16 Vp-p and offset range of ±8 suit this probe to a wide range of applications and signal types. The ZD differential probes are ideally suited for Automotive, Serial Data, power, and general purpose use. The differential input capacitance is only 1 pF to minimize loading distortion on the highest frequency signals under test. System noise of only 4 mVrms allows accurate measurement of the smallest signals.
A Variety of Probe Tips for Varied Tasks
Engineers often need to probe a variety of different test points in confined spaces. The extensive range of standard tip accessories for the ZD Series of probes ensures that this probe can meet any difficult probing challenge.
Innovative Probe Leads and Tips Provide Excellent Signal Performance Without Degradation
Probing with long leads or accessories is sometimes necessary to reach the test points, but it comes at the expense of reduced bandwidth, increased capacitance, and added noise. The ZD accessories are engineered to provide the best signal fidelity without ringing or distortions commonly introduced with tip accessories.
|
Specifications |
|
|---|---|
|
Bandwidth (Warranted) |
1500 MHz |
|
Bandwidth (Typical) |
1700 MHz |
|
Risetime 10–90% (Typical) |
270 ps |
|
Risetime 20–80% (Typical) |
200 ps |
|
LF Attenuation Accuracy (Warranted) |
2% |
|
Zero Offset (Typical) (within 15 minutes after autozero) |
5 mV |
|
System Noise (Typical) |
1.75 mVrms |
|
Probe Noise Density (Typical) |
38 nV/rt (Hz) |
|
Input Differential Range (Nominal) |
±8 V (16 Vp-p) |
|
Differential Offset Range (Nominal) |
±18 V |
|
Offset Gain Accuracy (Typical) |
2% |
|
Common Mode Range (Nominal) |
±10 V |
|
Maximum Non-destruct Voltage (Nominal) |
30 V |
|
CMRR (Typical) |
60 dB 50/60 Hz 30 dB 20 MHz 25 dB @ 1500 MHz |
|
DC Input Resistance (Nominal) |
50 kΩ (Common Mode) 120 kΩ (Differential Mode) |
|
Differential Input Capacitance (Typical) |
< 1.0 pF |
More Product Information
- Up to 65 GHz
- Up to 80 Channels @ 36 GHz
- Up to 160 GS/s
- Up to 512 Mpts/Ch
- 50 fs rms Sample Clock (Intrinsic) Jitter
- Jitter Between All Channels of <130 fs rms
- 150 MHz, 2 analog channels
- 8 synchronized digital channels (T3AWG2152-D only)
- 16-bit vertical resolution
- 128 MPts @Ch waveform memory
- Max sampling rate of 600 MS/s
Differential active probes are like two probes in one. Instead of measuring a test point in relation to a ground point (like single-ended active probes), differential probes measure the difference in voltage of a test point in relation to another test point
- High signal fidelity to 4 GHz bandwidth
- Low circuit loading – High input impedance and low capacitance
- 4 GHz, 2.5 GHz, 1.5 GHz and 1 GHz models
- 1 MΩ input resistance
- 0.6 pF (4 GHz) and 0.9 pF input capacitance
- ± 8 V input dynamic range, ± 12 V offset range
- Wide variety of tips and grounds
- Easy to use, integrated with oscilloscope
With the ProBus interface, the ZD500, 1000, and 1500 becomes an integral part of the oscilloscope. All probe gain and offset controls are transparent to the user, making it easier to probe the circuit without concern for which gain setting to choose. When used with a LeCroy digital oscilloscope, no external power supply is required.
- 500 MHz - 4 GHz bandwidths
- Up to 40 GS/s sample rate
- 15.4” capacitive touch screen
- MAUI with OneTouch
- Powerful, Deep Toolbox
- Exceptional Serial Data Tools
- 16 digital channels with 1.25 GS/s
- Huge Applied Offset Range
- Optional Application Packages
-
HD4096 technology provides 12-bit resolution up to 8 GHz and 20 GS/s
-
Up to 5 Gpts of acquisition memory enables detailed viewing of long events
-
15.6" 1900 x 1080 Full HD capacitive touchscreen
-
New ProBus2 input supports up to 8 GHz bandwidth and direct compatibility with a wide variety of existing ProBus probes - 50Ω and 1MΩ coupling modes support all input types on a single connector
-
MAUI with OneTouch user interface for intuitive and efficient operation
-
Deep toolbox enables and simplifies complex analysis
-
Intuitive navigation to quickly find important features in long waveforms
- 100 MHz, 200 MHz, 350 MHz, 500 MHz and 1 GHz bandwidths
- Up to 4 GS/s sample rate
- Long Memory – up to 20 Mpts
- 10.1” capacitive touch screen display
- 16 Digital Channel MSO option
- MAUI - Most Advanced User Interface
- Designed for Touch
- Built for Simplicity
- Made to Solve
- Advanced Anomaly Detection
- Fast Waveform Update
- History Mode - Waveform Playback
- WaveScan - Search and Find
- Multi-Instrument Capabilities
- Protocol Analysis - Serial Trigger and Decode
- Waveform Generation - Built-in Function Generator
- Digital Voltmeter and Frequency Counter
- Future Proof
- Upgradeable Bandwidth
- Field Upgradable Software and Hardware Options
- Highest resolution - 12 bits all the time
- Bigger Display, smaller footprint, most bench space
- More capability, increased productivity
Teledyne LeCroy
Teledyne LeCroy is a leading provider of oscilloscopes, protocol analyzers and related test and measurement solutions that enable companies across a wide range of industries to design and test electronic devices of all types. Since our founding in 1964, we have focused on creating products that improve productivity by helping engineers resolve design issues faster and more effectively.
Oscilloscopes are tools used by designers and engineers to measure and analyze complex electronic signals in order to develop high-performance systems and to validate electronic designs in order to improve time to market. Protocol analyzers are tools used by designers and engineers to generate and monitor traffic over high speed serial data interfaces, including DDR, PCI Express, Fibre Channel, Serial ATA, SAS, USB and others. Both products are critical in the development of a wide variety of demanding design applications.
We utilize both of these important product areas in combination to tackle the most demanding serial data test applications, offering tailored solutions to help our customers perfect their chips, interfaces, subsystems and products which utilize these important communications standards. With the explosion in the use of serial data communications technologies in semiconductors, between devices on circuit boards and between computers and peripherals, we are aimed at a growing and important market.
Our oscilloscopes offer a powerful combination of large and informative displays combined with advanced waveshape analysis capabilities typically tailored to enhance the productivity of engineers in specific applications areas such as serial data test, disk drive test and automotive bus analysis.
Headquartered in Chestnut Ridge, New York, LeCroy has sales, service and development subsidiaries in the US and throughout Europe and Asia. LeCroy products are employed across a wide variety of industries, including semiconductor, computer, consumer electronics, military/aerospace, automotive/industrial, and telecommunications.
Contact Details
Headquarters Teledyne LeCroy
700 Chestnut Ridge Road, Chestnut Ridge, NY 10977-6499, USA
Phone: 800-553-2769 or 845-425-2000
Phone Support: 1-800-553-2769
Fax Sales: 845-578-5985
Email Sales: contact.corp@teledynelecroy.com
Email Support: support@teledynelecroy.com (Oscilloscopes, Waveform Generators, Signal Integrity)
Test & Measurement
Download Line Card
Document
