Southwest Microwave - 1.85 mm (V) Connectors - 67 GHz
1.85 mm (V) DC to 67 GHz connectors from Southwest Microwave include field-replaceable 2- and 4-hole Flange-mount and standard or metric Thread-in Connectors, Direct-solder Cable Connectors, clamp-on End Launch Connectors, and the new Solderless Vertical Launch Connector.
1.85mm (V) Jack (Female) 2 Hole .500 Long
|
Model Number |
Accepts Pin Diameter |
Hermetic Seal Available |
Data Sheet |
|---|---|---|---|
|
.012 |
YES |
||
|
.009 |
YES |
1.85mm (V) Jack (Female) 2 Hole .550 Long
|
Model Number |
Accepts Pin Diameter |
Hermetic Seal Available |
Data Sheet |
|---|---|---|---|
|
.009 |
YES |
||
|
.012 |
YES |
1.85mm (V) Jack (Female) 2 Hole .625 Long
|
Model Number |
Accepts Pin Diameter |
Hermetic Seal Available |
Data Sheet |
|---|---|---|---|
|
.009 |
YES |
||
|
.012 |
YES |
1.85mm (V) Jack (Female) 4 Hole .375 Square
|
Model Number |
Accepts Pin Diameter |
Hermetic Seal Available |
Data Sheet |
|---|---|---|---|
|
.009 |
YES |
||
|
.012 |
YES |
||
|
.009 |
YES |
||
|
.012 |
YES |
1.85mm (V) Jack (Female) 4 Hole .500 Square
|
Model Number |
Accepts Pin Diameter |
Hermetic Seal Available |
Data Sheet |
|---|---|---|---|
|
.009 |
YES |
||
|
.012 |
YES |
1.85mm (V) Jack (Female) 4 Hole .500SQ Field Replaceable Cable Connector
|
Model Number |
Cable |
Data Sheet |
|---|---|---|
|
.047 |
1.85mm (V) Jack (Female) Direct Solder Cable Connector
|
Model Number |
Cable |
Data Sheet |
|---|---|---|
|
.047 |
1.85mm (V) Jack (Female) Field Replaceable
|
Model Number |
Cable |
Mounting Style |
Data Sheet |
|---|---|---|---|
|
.047 |
Inline |
||
|
.031 |
Inline |
1.85mm (V) Jack (Female) Thread-in
|
Model Number |
Accepts Pin Diameter |
Hermetic Seal Available |
Data Sheet |
|---|---|---|---|
|
.009 |
YES |
||
|
.009 |
YES |
||
|
.012 |
YES |
||
|
.012 |
YES |
1.85mm (V) Jack (Female) Thread-in Hex
|
Model Number |
Accepts Pin Diameter |
Hermetic Seal Available |
Data Sheet |
|---|---|---|---|
|
.009 |
YES |
||
|
.009 |
YES |
1.85mm (V) Plug (Male) 2 Hole .550 Long
|
Model Number |
Accepts Pin Diameter |
Hermetic Seal Available |
Data Sheet |
|---|---|---|---|
|
.009 |
YES |
||
|
.012 |
YES |
1.85mm (V) Plug (Male) 2 Hole .625 Long
|
Model Number |
Accepts Pin Diameter |
Hermetic Seal Available |
Data Sheet |
|---|---|---|---|
|
.009 |
YES |
||
|
.012 |
YES |
1.85mm (V) Plug (Male) 4 Hole .375 Square
|
Model Number |
Accepts Pin Diameter |
Hermetic Seal Available |
Data Sheet |
|---|---|---|---|
|
.009 |
YES |
||
|
.012 |
YES |
1.85mm (V) Plug (Male) Direct Solder Cable Connector
|
Model Number |
Cable |
Data Sheet |
|---|---|---|
|
.047 |
|
|
|
.086 |
|
|
|
.047 Low Loss |
|
|
|
.047 |
||
|
.086 Low Loss |
|
1.85mm (V) Plug (Male) Thread-In
|
Model Number |
Accepts Pin Diameter |
Hermetic Seal Available |
Data Sheet |
|---|---|---|---|
|
.009 |
YES |
||
|
.009 |
YES |
||
|
.012 |
YES |
||
|
.012 |
YES |
1.85mm (V) Plug (Male)4 Hole .500 Square
More Product Information
-
DC, AC and RF/microwave device characterization, 1/f, WLR, FA and design debug
-
Full thermal range of -60°C to +300°C
-
Reliable and repeatable contact
-
Moisture-free, light-tight and EMI-shielded test environment with MicroChamber® technology
-
Enables full access to the chuck and the auxiliary sites
-
Intuitive, and precise movement of chuck in X, Y, and Z-direction
-
High thermal stability components
-
On-axis probe-to-pad alignment
-
Flexibility from hot only to full thermal range of -60°C to +300°C
-
Thermally induced drift can be automatically re-aligned for 30 μm pads in a temperature range from -40°C to 150°C (the effective temperature range depends on pad size, probe card holder and probe card)
-
3 performance level configurations (fully-shielded / shielded / open)
-
Test automation out-of-cassette for higher test cell efficiency for over-night/over-weekend operation
-
User-centered design minimizes training costs and enhances efficiency
See more Key Features on Specifications & Details tab
The low frequency tuners are a unique product technology using MPT algorithms for low frequency wideband tuning. Three or more cascaded tuning sections use series transmission cables and parallel rotary capacitors.
The length of the cables and number of tuning sections are optimized for maximum tuning range over a given bandwidth. HLFT tuners use 6 tuning sections allowing second harmonic frequency tuning.
Focus offers a complete range of manual tuners. The MMT series use the same RF technology and precision as a comparable automatic tuner.
They are available in octave and multi-octave bands between 400 MHz and 18 GHz and provide high VSWR at DUT reference plane with a high reliability.
For harmonic tuning requirements, the MMT series can be enhanced, referring to as option –H2 and –H23, using a similar concept as Focus’ harmonic rejection tuners (PHT).
For more information on Automated Tuners, Click here!
-
Supports the latest 5G FR1 and IEEE 802.11ax standards
-
up to 1GHz active load pull bandwidth capability
-
Test the latest high bandwidth and high modulation cellular standards such as 1024QAM 802.11ax
-
This system can be used in all parts of the design cycle
-
-
Initial device characterisation
-
MMIC or PA design
-
Design verification testing
-
Product testing in the factory
-
-
Focus recommends TRL Calibration Kits for applications such as load pull & noise parameters. Due to high reflection and low loss, tuner S-parameter measurements represent a challenge for VNA’s, because of error term determination and coupler directivity. Long experience has taught us not to rely on other calibration techniques than TRL (Thru-Reflect-Line). The popular SOLT technique is conditionally useable, but not guaranteed, up to 4GHz. The much convenient ECal method has provided questionable and inconsistent results. Our Customers are advised to be very careful with VNA calibrations, because the whole measured data depends on that.
Because of this, and to save our customers time and doubt, Focus has developed and offers a set of precise and reliable TRL calibration kits from 0.03 to 110 GHz with the following connector types: 7/16, N, APC-7, 3.5mm, 2.9mm, 2.4mm, 1.85mm, WR-15, WR-10. Our calibration kits are compatible with all commercial network analyzers.
For more information on TRL Calibration Kits, please read the following paper on TRL Versus SOLT
Focus Microwaves pushes the boundaries of tuner technology once again. While 6G frequencies and applications are still being defined, Focus took the initiative and developed a new family of waveguide tuners designed for frequencies greater than 110GHz. Leveraging the success and technology of the DELTA tuners (industry standard for direct connect on wafer applications) and combined it with the micro-metric accuracy and repeatability of the small footprint omega tuners. These new waveguide tuners will revolutionize the Sub-THz bands.
SuperMini Board-to-Board solutions optimize interconnect performance for board-to-board stacking applications.
Available bullets enable board-to-board spacing as close as 3 mm, assuring transmission line dependability for tightly stacked PCBs. Low mating insertion force allows for an increased density of interconnections per board. Unique bullet design enables extended mating and de-mating cycles.
Our 2 Series cable assembly showcases excellent phase stability against bending, developed with microwave/mmWave measurement environments in mind.
Its flexibility means low repulsion, reducing the load on the measured object
- Combine up to 16 SPDT or 8 multiport, high-performance relays in a 2U footprint
- Latching/Terminated options (EX7204L)
- LXI/LAN and USB command and control options
- Embedded web interface provides interactive utility to monitor and control relays from anywhere in the world
- Flexible API supports IVI and Linux development environments minimizing software investment
- LXI trigger event implementation provides seamless test synchronization with external devices
- Store up to 128 relay configurations for quick recall, including automatic power-up state
Southwest Microwave
Since 1981, Southwest Microwave has delivered performance-leading interconnect solutions currently available from DC to 110 GHz for hi-rel/space, defense, instrumentation, integrated-circuit and PCB evaluation applications. Built in the USA to rigorous performance and quality standards, Southwest Microwave connectors deliver the industry’s lowest RF leakage, insertion loss and VSWR. Products include Super SMA, N, TNC, SSMA, 2.92mm, 2.40mm, 1.85mm, 1.35mm, 1.0mm and 0.9mm SuperMini connectors in a variety of mounting configurations, plus board-mount (end-launch, vertical launch, board-to-board) connectors, cable assemblies, coax contacts for multicavity connectors, adapters, installation tools and launch accessories for microstrip, stripline and coplanar launches.
Contact Details
Southwest Microwave - Corporate Headquarters
9055 S. McKemy St., Tempe, AZ 85284-2946, USA
Phone: 480-783-0201
Fax: 480-783-0360
Test & Measurement
Download Line Card
Document
Embedded
Download Line Card
Document
