Tuners
Products
The low frequency tuners are a unique product technology using MPT algorithms for low frequency wideband tuning. Three or more cascaded tuning sections use series transmission cables and parallel rotary capacitors.
The length of the cables and number of tuning sections are optimized for maximum tuning range over a given bandwidth. HLFT tuners use 6 tuning sections allowing second harmonic frequency tuning.
Focus offers a complete range of manual tuners. The MMT series use the same RF technology and precision as a comparable automatic tuner.
They are available in octave and multi-octave bands between 400 MHz and 18 GHz and provide high VSWR at DUT reference plane with a high reliability.
For harmonic tuning requirements, the MMT series can be enhanced, referring to as option –H2 and –H23, using a similar concept as Focus’ harmonic rejection tuners (PHT).
For more information on Automated Tuners, Click here!
Focus Microwaves’ DELTA series of electro-mechanical tuners is designed specifically for high frequency on wafer measurements. The tuner’s low profile allows it to be placed within the wafer perimeter and allows for a direct connection between the probe tip and the tuner, eliminating all possible insertion loss between the DUT and the tuner. This revolutionary new tuner design enables the engineer to achieve optimum tuning range, with a tuner whose footprint and weight has been dramatically reduced.
-
Supports the latest 5G FR1 and IEEE 802.11ax standards
-
up to 1GHz active load pull bandwidth capability
-
Test the latest high bandwidth and high modulation cellular standards such as 1024QAM 802.11ax
-
This system can be used in all parts of the design cycle
-
-
Initial device characterisation
-
MMIC or PA design
-
Design verification testing
-
Product testing in the factory
-
-
Focus provides the deepest portfolio of wideband fundamental and harmonic passive tuners. Passive impedance tuners generate controllable reflection factor (Impedance) across the smith chart over a given frequency range. Focus uses two basic technologies:
-
From 100MHz to 120GHz we use the slide screw technique in which a reflective probe is inserted into a low loss slotted transmission line.
-
For frequencies from 10MHz to 170MHz we use a lumped element technology, whereby variable capacitors are connected with optimized lengths of coaxial cable. To view our Low Frequency Tuners, Click Here!
Most Focus Passive Tuners use long lasting RF probes which are designed for optimal tuning accuracy and are free of spurious resonances. The combination of multiple probes provide ultra wideband coverage in one single tuner. All Focus Passive Tuners are LAN controlled and include on-board impedance synthesis firmware.
For more information on Passive Tuners, visit our youtube channel!
Focus Microwaves pushes the boundaries of tuner technology once again. While 6G frequencies and applications are still being defined, Focus took the initiative and developed a new family of waveguide tuners designed for frequencies greater than 110GHz. Leveraging the success and technology of the DELTA tuners (industry standard for direct connect on wafer applications) and combined it with the micro-metric accuracy and repeatability of the small footprint omega tuners. These new waveguide tuners will revolutionize the Sub-THz bands.