Teledyne DALSA - Linea Lite - Compact, Cost-Effective Line Scan Camera
Linea Lite makes line scan more accessible than ever. Designed with performance in mind, this camera offers superior color fidelity with 2k to 4k resolution and line rates from 12.5 to 50 kHz, with a GigE Vision® interface.
Remarkably cost effective performance
Linea Lite makes line scan more accessible than ever. Designed with performance in mind, this camera offers superior color fidelity with 2k to 4k resolution and line rates from 12.5 to 50 kHz, with a GigE Vision® interface.
Compact and powerful
With a 45% smaller footprint than the original Linea, Power over Ethernet to simplify cabling, and supported by features like T2IR and our easy to use SaperaLT control software, Linea Lite is built for fast, easy deployment, perfect for applications like these:
- Automated optical inspection
- Sorting systems
- Materials grading and inspection
- General purpose machine vision
Family Specifications
|
Camera Type |
Line Scan |
|---|---|
|
Sensor Technology |
CMOS |
|
Supported Interfaces |
GigE Vision |
|
Spectrum Capability |
Visible (400-700 nm) |
|
Features |
Power over Ethernet (PoE) |
Models
|
Model Number |
Resolution |
Spectrum |
Interface |
Pixel Size (μm) |
Max Line Rate |
|---|---|---|---|---|---|
|
2048 x 2 (Bilinear) |
Color |
1 GigE |
14 |
25 kHz |
|
|
2048 x 2 (Bilinear) |
Mono |
1 GigE |
14 |
50 kHz |
|
|
4096 x 2 (Bilinear) |
Color |
1 GigE |
7 |
12.5 kHz |
|
|
4096 x 2 (Bilinear) |
Mono |
1 GigE |
7 |
25 kHz |
|
|
8192 x 2 (Bilinear) |
Mono |
1 GigE |
3.5 |
25 kHz |
More Product Information
Transmission line probes are a special type of passive probe designed for use at very high frequencies. They replace the high impedance probe cable found in a traditional passive probe with a precision transmission line, with a characteristic impedance that matches the oscilloscope input (50 Ohm). This greatly reduces the input capacitance to a fraction of a picofarad, minimizing the loading of high frequency signals. A matching network at the tip increases the DC input resistance. While they have lower DC input resistance than a traditional passive probe (usually 500 Ohm) to 1kOhm), the input impedance of these probes remains nearly constant over their entire frequency range. A traditional /10 passive probe will have a 10 MOhm) input impedance at DC, however this impedance drops rapidly with frequency, passing below the input impedance of a transmission line probe at less than 100 MHz.
-
Easy to Use
-
No need to break the circuit or insert a shunt
-
Small form factors for use on crowded boards
-
-
Variety of Applications
-
Bandwidths up to 100 MHz
-
Peak currents up to 700 A
-
Sensitivities down to 1mA/div
-
-
High Precision Measurements
-
Low frequency accuracy of 1%
-
Integrated autozero capability
-
-
Fully Integrated with Teledyne LeCroy Oscilloscope
-
No additonal hardware is required
-
Power is supplied from oscilloscope ProBus connection
-
Automatic display of waveforms in Amps and calculated power traces scaled correctly in Watts
-
Degauss and Autozero directly from oscilloscope user interface
-
-
DCS025 Deskew Calibration Source
-
Provides ability to precisely deskew most voltage probes along with 30, 150 and 500A current probes
-
- Four operating modes: – CC, CV, CR, CP
- Static, Dynamic and Sequence mode support
- Built in Application Functions - Short Circuit Test, Battery Test Mode, CR-LED Mode, OCP and OPP Test
- Provides a load of up to 300 Watts
- Programmable and analog external control
-
Designed for machine vision applications that require broad illumination over a wide area with controlled fall off.
-
This BALA (Broad Area Linear Array) bar light series is expandable in 1″ increments up to 82″.
-
Applications requiring an even wider area of illumination can utilize two BALA bar lights aligned in parallel, facing each other.
-
AL150 derivatives include AL4424 (4″), AL4554 (9″) and AL46120 (20″) (which represent legacy part numbers)
The all new Linea HS™ delivers line rates up to an incredible 400 kHz at 32k resolution — over 13 Gpixels/sec via CLHS interface. With up to 128 TDI stages (plus an extra 64 in HDR mode) for unmatched sensitivity and incredibly low noise, Linea HS excels in the highest speed, lowest light applications.
- Up to 65 GHz
- Up to 80 Channels @ 36 GHz
- Up to 160 GS/s
- Up to 512 Mpts/Ch
- 50 fs rms Sample Clock (Intrinsic) Jitter
- Jitter Between All Channels of <130 fs rms
Linea line scan cameras deliver the performance and features usually found in high-end cameras at an attractive price point. Based on advanced CMOS line scan technology, Linea GigE cameras have a 2k or 4k single line 7.04 µm x 7.04 µm pixel array. With excellent sensitivity and speed, Linea surpasses the requirements of demanding applications —such as materials grading and inspection, transportation safety, and general purpose machine vision.
-
Monochrome (G-131B) and color (G-131C) models
-
GigE Vision interface with Power over Ethernet
-
Screw mount RJ45 Ethernet connector for secure operation in industrial environments
-
Supports cable lengths up to 100 meters (CAT-6 recommended)
-
Comprehensive I/O functionality for simplified system integration
-
Popular C-Mount lens mount
-
Easy camera mounting via standard M3 threads on top and bottom of housing or optional tripod adapter
-
Easy software integration with Allied Vision's Vimba Suite and compatibility to the most popular third party image-processing libraries.
-
Defect pixel masking feature with the Defect Mask Loader tool that allows you to manage a user defined defective pixel list to match your application and optimize the life cycle of the camera.
-
Select between B 270 ASG protection glass and filter types: Jenofilt 217 IR cut filter, Hoya C-5000 IR cut filter, RG715 IR pass filter, or RG830 IR pass filter
- Industry’s latest CMOS image sensors
- Simplified set-up with field proven Sapera LT software featuring CamExpert
- Engineered to accommodate industrial environment with a ruggedized screw mount SDR connectors
- GenICan GenCP compliant
Teledyne DALSA
Teledyne DALSA is an international leader in high performance digital imaging and semiconductors with approximately 1000 employees world-wide. Established in 1980 and acquired by Teledyne Technologies in 2011, Teledyne DALSA designs, develops, manufactures, and markets digital imaging products and solutions, in addition to providing semiconductor products and services. Our core competencies are in specialized integrated circuit and electronics technology, software, and highly engineered semiconductor wafer processing.
Teledyne DALSA exists for the long term. Our goal is to build upon our 30 year heritage of developing the world's leading high performance digital imaging and semiconductor solutions and to accelerate our level of innovation. We focus on R&D development but also draw on the capabilities available to us as part of a larger organization. We seek to deliver products and technology that are truly innovative so that we can help our customers succeed.
Contact Details
Teledyne DALSA Headquarters
605 McMurray Road, Waterloo, Ontario, Canada N2V 2E9
Phone: 519-886-6000
Fax: 519-886-8023
Imaging/Machine Vision
Download Line Card
