Teledyne DALSA - Linea High Performance Mono Line Camera
Linea line scan cameras deliver the performance and features usually found in high-end cameras at an attractive price point. Based on advanced CMOS line scan technology, Linea GigE cameras have a 2k or 4k single line 7.04 µm x 7.04 µm pixel array. With excellent sensitivity and speed, Linea surpasses the requirements of demanding applications —such as materials grading and inspection, transportation safety, and general purpose machine vision.
Powerful enough to use anywhere.
Affordable enough to use everywhere.
Introducing Linea, a CMOS line scan camera that can help you improve your imaging and lower your costs. Linea starts with an advanced CMOS sensor with high quantum efficiency and low noise for better images. Linea is also packed with advanced features to make your machine vision job almost effortless.
Latest generation CMOS technology.
Linea uses Teledyne DALSA's own advanced CMOS line scan sensors with high QE and low noise for better image quality. Available in resolutions from 2k to 16k, and now with color options.
Break through the GigE limit.
Teledyne DALSA's proprietary TurboDrive™ technology allows Linea GigE to deliver its full image quality at line rates up to 80 kHz—several times faster than competitors—with no changes to your GigE network.
Linea Features
Bilinear Color
- See things in a whole new light with Linea's color option. Our bilinear color architecture maximizes color fidelity and image quality better than anything else at its price point, and still takes advantage of the incredible speed and throughput made possible with TurboDrive.
TurboDrive™
- Teledyne DALSA's proprietary TurboDrive™ technology allows Linea GigE to deliver its full image quality at line rates up to 80 kHz—several times faster than competitors—with no changes to your GigE network.
Burst Mode
- Linea's GigE models can take advantage of its high speed sensor by capturing and buffering high speed bursts faster than GigE allows.
Cycling Mode (GigE Versions only)
- Linea GigE cameras let you change your settings every line and cycle through up to five different user-controlled configurations. That means for every line you can use a different light source, lighting angle, exposure time, gain, and more to get more information from a single pass with a single camera.
HDR Imaging
- Linea lets you combine short and long exposures to see details in bright and dark areas at the same time.
Multiple ROI
- Linea gives you Multiple Regions of Interest to let you reduce your data transfer and processing load — all of which not only help boost performance but also reduce your system cost.
Typical Applications
|
Recycling |
Pharmaceutical labels and Print inspection |
|
Postal Sorting |
Food Inspection |
|
Railway, train, vehicle inspection |
Material Inspection |
Family Specifications
|
Camera Type |
Line Scan |
|---|---|
|
Sensor Technology |
CMOS |
|
Supported Interfaces |
GigE Vision, Camera Link, Camera Link HS, Gigabit Ethernet |
|
Spectrum Capability |
Visible (400-700 nm), Near Infrared (700-1000 nm) |
|
Features |
TurboDrive, T2IR, Power over Camera Link (PoCL) |
Models
|
Model Number |
Resolution |
Spectrum |
Interface |
Pixel Size (μm) |
Max Line Rate1 |
|---|---|---|---|---|---|
|
2048 x 2 (Bilinear) |
Color |
Camera Link |
7.04 |
26 kHz / 45 kHz with TurboDrive |
|
|
4096 x 2 (Bilinear) |
Color |
Camera Link |
7.04 |
13 kHz / 45 kHz with TurboDrive |
|
|
4096 x 2 (Bilinear) |
Color |
Camera Link |
7.04 |
48 kHz |
|
|
8192 x 2 (Bilinear) |
Color |
Camera Link |
7.04 |
48 kHz |
|
|
16384 x 1 |
Mono |
Camera Link |
3.5 |
48 kHz |
|
|
16384 x 1 |
Mono |
Camera Link HS |
3.52 |
71 kHz |
|
|
2048 x 1 |
Mono |
1 GigE |
7.04 |
52 kHz / 80 kHz with TurboDrive |
|
|
2048 x 1 |
Mono |
Camera Link |
7.04 |
80 kHz |
|
|
4096 x 1 |
Mono |
1 GigE |
7.04 |
26 kHz / 80 kHz with TurboDrive |
|
|
4096 x 1 |
Mono |
Camera Link |
7.04 |
80 kHz |
|
|
8192 x 1 |
Mono |
1 GigE |
7.04 |
13 kHz / 45 kHz with TurboDrive |
|
|
8192 x 1 |
Mono |
Camera Link |
7.04 |
80 kHz |
More Product Information
Differential active probes are like two probes in one. Instead of measuring a test point in relation to a ground point (like single-ended active probes), differential probes measure the difference in voltage of a test point in relation to another test point
With the ProBus interface, the ZD200 becomes an integral part of the oscilloscope. The probe sensitivity and offset are automatically optimized based on the oscilloscope gain settings, so control is transparent to the user. When used with a LeCroy digital oscilloscope, no external power supply is required.
- High Power Density: 600 watts in 1U (1.75 inches) high, half rack (8.5 inches) wide; no top or bottom clearance spacing required.
- Near Linear Ripple & Noise Ripple as low as 2.5mV rms, noise as low as 15mV p-p.
- Remote Control
- LXI Compliant Ethernet LAN / RS-232C (16 bit)
- IEEE-488.2 / RS-232C (12 bit)
- Standard analog programming 0-5V, 0-10V, or 0-5kΩ.
- Up to 65 GHz
- Up to 80 Channels @ 36 GHz
- Up to 160 GS/s
- Up to 512 Mpts/Ch
- 50 fs rms Sample Clock (Intrinsic) Jitter
- Jitter Between All Channels of <130 fs rms
-
Highest resolution – 12 bits all the time
-
More channels, flexibility – 8 analog and 16 digital channels
-
Longest Memory – 5 Gpt records with simple navigation – no compromise
-
View 16 channels on one display with OscilloSYNC™
-
Powerful, deep toolbox enables and simplifies complex analysis
-
MAUI with OneTouch user interface for intuitive and efficient operation
- High resolution global shutter CMOS sensor
- 3 resolution models – 2M, 3M and 5M
- Dual core 1.5 GHz processor
- Embedded application software
- Ease-to-use setup for new vision adopters
- Built-in vision capabilities for most applications
- Standard factory protocols (EthernetIP, Modbus, Profinet)
- Operator interface flexibility
- Gigabit Ethernet and RS232 communications
- Isolated I/O and direct lamp connections
- Integrated ring light (optional on 2M version only)
- IP67 enclosure with lens cap
- Convenient mounting options
- Standard M12 cables
- True Differential TDR with <3mm Spatial Resolution
- Small Form Factor and Battery Powered
- S Parameters up to 15 GHz
- 35 ps Rise Time
- Up to 50,000 points long memory
- Emerging Serial Data Standards Testing
- 100% Automatic Inspection
- Low cost of ownership allows you to distribute processing across the production line. More points of inspection = better failure analysis and faster, easier corrective actions.
- No Software to Install
- BOA Spot's embedded vision tools offer powerful, flexible inspection with a simple interface.
- Integrated lighting
- LED ring light with multiple available colors makes illumination easy.
- Flexible Mounting Options
- Thru- and surface-mounting options and a slim form factor let BOA Spot fit into tight spaces.
High voltage differential probes provide high CMRR over a broad frequency range to simplify the measurement challenges found in noisy, high common-mode power electronics environments. The probe’s design is easy-to-use and enables safe, precise high voltage floating measurements.
Teledyne DALSA
Teledyne DALSA is an international leader in high performance digital imaging and semiconductors with approximately 1000 employees world-wide. Established in 1980 and acquired by Teledyne Technologies in 2011, Teledyne DALSA designs, develops, manufactures, and markets digital imaging products and solutions, in addition to providing semiconductor products and services. Our core competencies are in specialized integrated circuit and electronics technology, software, and highly engineered semiconductor wafer processing.
Teledyne DALSA exists for the long term. Our goal is to build upon our 30 year heritage of developing the world's leading high performance digital imaging and semiconductor solutions and to accelerate our level of innovation. We focus on R&D development but also draw on the capabilities available to us as part of a larger organization. We seek to deliver products and technology that are truly innovative so that we can help our customers succeed.
Contact Details
Teledyne DALSA Headquarters
605 McMurray Road, Waterloo, Ontario, Canada N2V 2E9
Phone: 519-886-6000
Fax: 519-886-8023
Imaging/Machine Vision
Download Line Card
