Teledyne LeCroy - ZS Series High Impedance Active Probes 1 GHz - 4 GHz Probes
- High signal fidelity to 4 GHz bandwidth
- Low circuit loading – High input impedance and low capacitance
- 4 GHz, 2.5 GHz, 1.5 GHz and 1 GHz models
- 1 MΩ input resistance
- 0.6 pF (4 GHz) and 0.9 pF input capacitance
- ± 8 V input dynamic range, ± 12 V offset range
- Wide variety of tips and grounds
- Easy to use, integrated with oscilloscope
Engineers must commonly probe high-frequency signals with high signal fidelity. Typical passive probes with high input R and C provide good response at lower frequencies, but inappropriately load the circuit, and distort signals, at higher frequencies. Active voltage probes feature both high input R and low input C to reduce circuit loading across the entire probe/oscilloscope bandwidth. With low circuit loading, and a form factor that allows probing in confined areas, the active voltage probe becomes the everyday probe for all different types of signals and connection points.
The ZS Series probes provide high impedance and an extensive set of probe tips and ground accessories to handle a wide range of probing scenarios. The high 1 MΩ input resistance and low 0.9 pF input capacitance means this probe is ideal for all frequencies. The ZS Series probes provide full system bandwidth with all Teledyne LeCroy oscilloscopes with bandwidths of 4 GHz and lower.
|
Model |
Bandwidth |
Input R |
Input C |
Dynamic Range |
Offset Range |
Interface |
|---|---|---|---|---|---|---|
| ZS1000 | 1 GHz | 1 MΩ | 0.9 pF | ± 8 V | NA | ProBus |
| ZS1500 | 1.5 GHz | 1 MΩ | 0.9 pF | ± 8 V | ± 12 V | ProBus |
| ZS2500 | 2.5 GHz | 1 MΩ | 0.9 pF | ± 8 V | ± 12 V | ProBus |
| ZS4000 | 4 GHz | 1 MΩ | 0.9 pF | ± 8 V | ± 12 V | ProBus |
More Product Information
Focus Microwaves’ DELTA series of electro-mechanical tuners is designed specifically for high frequency on wafer measurements. The tuner’s low profile allows it to be placed within the wafer perimeter and allows for a direct connection between the probe tip and the tuner, eliminating all possible insertion loss between the DUT and the tuner. This revolutionary new tuner design enables the engineer to achieve optimum tuning range, with a tuner whose footprint and weight has been dramatically reduced.
-
High performance power bypassing provides low-impedance and resonant-free connections to 20 GHz
-
RF bandwidth to 500 MHz
-
Long probe life: > 250,000 contacts
-
Beryllium-copper tips for gold pads or tungsten for aluminum pads
-
Oscillation-free testing of wide-bandwidth analog circuits
-
Use with ACP series probes to provide functional at-speed testing for known-good-die
-
Mix multiple contact types: Ground, Power (Standard or Eye-Pass), Logic/Signal
-
Low and repeatable contact resistance on aluminum pads ( < 0.25 Ω on Al, < 0.01 Ω on Au)
- High power density up to 150 kW in a single bay rack-mount cabinet. Up to 240 kW in a dual bay rack.
- Fast load transient response provides protection from undesired voltage excursions.
- Fast slew rate with exceptional rise/fall times for speed-critical applications.
- Low ripple suitable for the most sensitive applications.
- Low audible noise with temperature controlled variable speed fans.
- High accuracy voltage/current measurements without external DMMs.
- Modular architecture simplifies sparing and maintenance.
- Modular
- Control up to 95 assets
- Control multiple AC and DC power supplies and loads in one mainframe
- Create “virtual assets”
- Web browser control
- User configurable
- Highest Power Density
- Simple integration
- PFC
- Universal AC/DC input
- Up to 6kW in one mainframe
- 1kW DC modules
- PFC ≥0.95
- Reduced space and logistics hassles
- High power density
- Handles DC and AC power and load modules
- User configurable
- Universal AC/DC input
- Ease of integration
- Web browser control
- Trigger bus
- Configure modules to parallel or series operation “on the fly”
- Highest resolution - 12 bits all the time
- Bigger Display, smaller footprint, most bench space
- More capability, increased productivity
- This ultra high intensity line light series is built to handle the most extreme line scan lighting requirements.
- Provides an intensity level of 2,100 klx (working distance of 75 mm).
- Pre-engineered for expandability in 150 mm (6”) increments up to 2400 mm (94.5”).
- Available in multiple wavelengths.
- In the event of abnormally high ambient temperatures, the device automatically shuts down when the housing reaches 60°C and resumes operation at 56°C.
Note: Requires third party power supplies – refer to spec sheet.
- Provides a passive PCIe® backplane for test applications
- Self-contained, portable and self-powered
- Supplies power for +3.3V, +3.3Vaux and +12V rails
- Generates PCIe reference clock
- Accepts external clock inputs
- Generates valid PERST# bus reset that can be activated by manual push button
- Includes two mid-bus probe footprints for traffic monitoring
- Supports two PCIe x16 sockets which accept cards of any link width (x1, x4, x8, x16)
- Provides indication of valid connection of PRSNT1# and PRSNT2# lines for each card
- Supports data rates of 2.5 GT/s and 5.0 GT/s
-
MWX121 - Heat Resistant - offers a wide temperature range from -65 to +125°C.
-
MWX122 - High Durability - offers excellent cable durability against repeated bending.
Teledyne LeCroy
Teledyne LeCroy is a leading provider of oscilloscopes, protocol analyzers and related test and measurement solutions that enable companies across a wide range of industries to design and test electronic devices of all types. Since our founding in 1964, we have focused on creating products that improve productivity by helping engineers resolve design issues faster and more effectively.
Oscilloscopes are tools used by designers and engineers to measure and analyze complex electronic signals in order to develop high-performance systems and to validate electronic designs in order to improve time to market. Protocol analyzers are tools used by designers and engineers to generate and monitor traffic over high speed serial data interfaces, including DDR, PCI Express, Fibre Channel, Serial ATA, SAS, USB and others. Both products are critical in the development of a wide variety of demanding design applications.
We utilize both of these important product areas in combination to tackle the most demanding serial data test applications, offering tailored solutions to help our customers perfect their chips, interfaces, subsystems and products which utilize these important communications standards. With the explosion in the use of serial data communications technologies in semiconductors, between devices on circuit boards and between computers and peripherals, we are aimed at a growing and important market.
Our oscilloscopes offer a powerful combination of large and informative displays combined with advanced waveshape analysis capabilities typically tailored to enhance the productivity of engineers in specific applications areas such as serial data test, disk drive test and automotive bus analysis.
Headquartered in Chestnut Ridge, New York, LeCroy has sales, service and development subsidiaries in the US and throughout Europe and Asia. LeCroy products are employed across a wide variety of industries, including semiconductor, computer, consumer electronics, military/aerospace, automotive/industrial, and telecommunications.
Contact Details
Headquarters Teledyne LeCroy
700 Chestnut Ridge Road, Chestnut Ridge, NY 10977-6499, USA
Phone: 800-553-2769 or 845-425-2000
Phone Support: 1-800-553-2769
Fax Sales: 845-578-5985
Email Sales: contact.corp@teledynelecroy.com
Email Support: support@teledynelecroy.com (Oscilloscopes, Waveform Generators, Signal Integrity)
Test & Measurement
Download Line Card
Document
