Sorensen - XPL Series Economical and compact benchtop power supply
-
Low Noise
-
Excellent line/load regulation
-
Remote sense
-
Coarse and fine voltage controls
-
Constant voltage or constant current operation with automatic crossover and mode indication
-
Individual On/Off switch per output (not including fixed output)
-
Variable ( 1.5V to 5V ) Auxiliary Output
-
Shrouded socket-compatible with bare wire and shrouded safety plug connections up to 4 mm
The Sorensen XPL series has been designed to meet the need for compact power supply at a reasonable price. The XPL series provides 30 to 125 watts of programmable linear DC power. The XPL is a compact, high performance low cost power supply suited for benchtop applications.
The XPL Series uses linear regulation for high performance. The XPL Series features excellent line and load regulation with low noise and good transient response. The XPL Series is available in a single, dual and triple output for benchtop use
The XPL dual output model has two independent and isolated outputs each with a 0 to 30V, 0 to 2A capability and its own on–off switch. The outputs can be wired in either series or parallel to provide voltages up to 60 volts or currents up to 4 amps. All outputs are instrinsically short circuit proof, and are protected against external voltages and reverse currents. The XPL triple output model has the same features as the dual output model with an additional switchable fixed output of 3.3V and 5V.
Document
More Product Information
- High dispersion for reflective surfaces and shorter working distances.
- Provides a narrower and less intense illumination area than the AL116.
- IP65 compliant washdown option is available, as are a wide spectrum of wavelengths.
- Available with polarization and diffusion light conditioning.
- This expandable compact bar light is pre-engineered for custom lengths in 2″ increments up to 40″.
- Part of the MicroBrite™ family of high performance, compact machine vision lights.
- Produces an intensity level of 41kLux (working distance of 180mm).
- Available in several sizes including 50mm, 100mm, 160mm and 200mm.
- Dual Voltage ranges that support over voltage testing on 480V based systems
- Instrument Setups for quickly re-establishing the known instrument state
- 500uS time resolution for Transients
- Virtual Panels control software included
- Non-Linear current waveform programming during Load mode
- Phase coordination among multiple units (LKM/LKS)
- Powerful set of analog controls for PHIL and Modulation tests
- Trigger In & Out to permit extensive coordination with external systems
- Extensive Onboard diagnostics
- Digital I/O, including RS232, USB, Ethernet (GPIB optional)
- Intuitive 5” color display for ease of navigation
- Auto-paralleling for maximum flexibility with multi-chassis configurations
- Separate terminal blocks for single-phase and three-phase AC outputs
-
Integrated on-board image processing
-
Single board design
-
Easy hardware and software integration
-
Broad range of state-of-the-art sensors
-
Intelligent power management
-
Cost optimized design
- Ideal for UUT loading or simulation
- Wide resistance range from 0.5 Ω to 1.5 MΩ
- 0.1 Ω step size
- Over-voltage, over-current, and over-temperature sensing protects unit under test
- External voltage and current sense for monitoring built-in
- 4 Independent Channels
- 1Ω Resistance Increments
- Precision Sensor Simulation Capability
- Low Thermal Offset
- Independent Sense Feedback
- Parallel and Series Operation
- Dynamic Soft Front Panel
- IVI-COM, IVI-C, LabVIEW™ Drivers
- Monitoring the Set Values Without Disconnecting Channels Connections
- 3-Year Warranty
The SMX-6xxx product family includes the SMX-6101 (pictured), SMX-6103, SMX-6106, SMX-6111, SMX-6115, SMX-6116, and SMX-6144.
-
MWX121 - Heat Resistant - offers a wide temperature range from -65 to +125°C.
-
MWX122 - High Durability - offers excellent cable durability against repeated bending.
- Low output capacitance
- High bandwidth up to 30kHz
- High resolution I-V curve simulates static and dynamic conditions
- Designed for high speed Maximum Power Point Tracking (MPPT)
- Can be integrated into a multi-channel system for higher power testing
- Low voltage, high bandwidth version for DC Power Optimizers
- EN50530 support
AMETEK Programmable Power
Located in San Diego, California, AMETEK Programmable Power designs, manufactures, and markets precision, AC and DC programmable power supplies, electronic loads, application specific power subsystems, and compliance test solutions for customers requiring and valuing differentiated power products and services. Also part of our business is VTI Instruments, which delivers precision modular instrumentation and systems for electronic signal distribution, acquisition, and monitoring, used in the world's most demanding test applications.
AMETEK Programmable Power boasts one of the industries' broadest portfolios of programmable power products under the well-known and respected Sorensen, Elgar, and California Instruments brands. AMETEK Programmable Power’s products serve a wide range of stimulus (T&M) and process power needs in applications including semiconductor fabrication, commercial and defense ATE, oil exploration, solar array and battery string simulation, avionics, general R&D and EMC compliance testing.
VTI Instruments provides products and systems which are used to monitor and record data that characterizes the physical integrity and performance of aircraft, engines, and other large structures, as well as automate the functional testing of complex electronic systems. VTI Instruments is recognized as an industry leader with a reputation of providing reliable data, first time, every time.
With strong brands, a broad product portfolio, exceptional precision power conversion and control expertise, proven power system integration capabilities and deep applications knowledge, AMETEK Programmable Power is your source for programmable power supplies, precision data acquisition instruments, and more.
Contact Details
AMETEK Programmable Power, Inc. − San Diego
9250 Brown Deer Road, San Diego, CA 92121, USA
Phone: 858-450-0085
Fax: 858-458-0267
Email: sales.ppd@ametek.com for general inquiries
Test & Measurement
Download Line Card
Document
