-
Pre-Engineered Scalability Enables Customized Emitting Lengths in 2″ Increments to 20″
-
Intense, Diffuse Lighting with 226 kLux at Emitting Surface
-
Multiple Available Wavelengths, Including Visible Monochromatics, Infrared, and White
-
Available Washdown Option for Difficult Environments
-
Can be Applied in Backlighting or Diffuse Front Lighting Geometries
Advanced Illumination - LL230 Series Ultra High Intensity Line Lights
- This ultra high intensity line light series is built to handle the most extreme line scan lighting requirements.
- Provides an intensity level of 2,100 klx (working distance of 75 mm).
- Pre-engineered for expandability in 150 mm (6”) increments up to 2400 mm (94.5”).
- Available in multiple wavelengths.
- In the event of abnormally high ambient temperatures, the device automatically shuts down when the housing reaches 60°C and resumes operation at 56°C.
Note: Requires third party power supplies – refer to spec sheet.
General Specs
|
Electrical Specifications |
Current |
24V Current |
All Other Controls |
|---|---|---|---|
|
625 |
Please see Electrical Specs |
N/A |
|
|
455, 530, WHI |
Please see Electrical Specs |
N/A |
|
|
Normal Operating Temperature |
0 - 60°C |
||
|
Weight |
300mm model - 2082.0g (73.4oz) (4.59lbs) | ||
|
Standard Cable Information |
No cable included. Please see page 5. |
||
|
Photobiological Risk Factor |
Group 3 (High-Risk) Applicable Wavelengths: 455, 530, 625, WHI | ||
|
Compliance |
CE, RoHS, IEC 62471 |
||
|
IP Rating |
Not Rated |
||
|
Lumen Maintenance |
L70 = 50,000 Hours |
||
Mechanical Specs
Optical Specs
Electrical Specs
Power and Wiring
Part Number Key
More Product Information
- The Linear Coaxial Light provides a type of diffuse illumination; diffuse light from an internal source is folded downwards along the camera’s imaging axis and onto the imaging plane.
- High speed machine vision line scan applications receive greater image contrast with a Linear Coaxial Light.
- The DL110 includes a high efficiency, coated, easy to clean dust cover to protect the beamsplitter.
-
APS-H optical format CMOS sensor
-
PoCXP
-
4-DIN type connector
-
79.7 fps at full resolution
-
Extended near-infrared (X-2620B NIR) model
-
Extended feature set with Sequencer Control and Multiple Region of Interest selection to support advanced imaging applications
-
On-board Defect Pixel and 2D Fixed Pattern Noise Correction for improved image quality
-
Simplified firmware update in the field via interface cables using GenICam File Access
-
Robust, fan-less design for industrial imaging applications
-
Heat-dissipation optimized housing to reduce image noise
-
Build-in tripod adapter and multiple mounting holes for eased system integration
-
DIN 1.0/2.3 CoaXPress connectors for secure operation in industrial environments
-
Single cable solution using Trigger and Power over CoaXPress
-
Comprehensive I/O functionality for extended control of connected system components
-
Select between B 270 ASG protection glass and filter types: IRC30 IR cut filter or Schneider 486 IR cut filter
- The RL127 is characterized as a Large High Dispersion Bright Field ring light.
- Non-lensed LEDs disperse light at broad angles, providing “soft” lighting for applications that require short to medium working distances.
- The low-profile design is only .75” (19mm) thick, with an O.D. of 4.6” (117mm) and I.D. of 2.61” (66.3mm) allowing it to be used in space constrained applications.
- The I.D. provides a standard 67mm diameter thread with a pitch of .75mm for further mounting flexibility.
- A wide variety of wavelengths are available from UV to IR. An optional polarizer and/or diffuser may be used to further condition the light output.
- The RL121 delivers 20kLux at a working distance of 100mm.
The Focus Compact Model (FCM) utility is a streamlined software package designed to be used with Focus’ AURIGA high-end Pulsed-IV system, that is used to generate Compact Models for transistors from their Pulsed-IV and wideband pulsed s-parameter data.
This is achieved by generating a network of lumped circuit elements that represent accurately the fundamental linear & non-linear behavior of the device over a broad range of bias and power range.
The result of the modeling is a netlist and compatible with- the most common CAD tools used in RF Design; such as AWR Microwave office (MWO) and Keysight PathWave Advanced Design System (ADS).
- For use with the SL256 Pattern Projecting Spot Lights
- Five field-replaceable standard patterns available
- 0.050mm line width photolithography
- Reticles include spanner wrench
- Please contact Ai for custom reticle patterns
- 8 Independent Channels, 2 Output Connectors
- Includes built-in pre-programmed sequencing.
- Provides control for computational imaging, including photometric stereo, extended depth of field, combined bright field + dark field, high dynamic range, and high resolution color.
- Ideal for multi-channel lights and multi-light stations. Due to power output constraints, some configurable light lengths may be limited.
- Housed within a compact enclosure with DIN rail mounting.
- Driven with SignaTech™ for improved safety and easy operation.
NOTE: NOT COMPATIBLE WITH C1 CONNECTORS
- S-parameters DC to 40 GHz, single-ended and mixed-mode
- Impedance Profile with <1 mm resolution, differential and common-mode
- Internal, automatic OSLT calibration
- USB-connected, small, lightweight
- Flexible display of the measurements
- Remove effects from fixtures, connectors and cables
- Emulate eye diagrams with CTLE, DFE and FFE equalization
- Advanced jitter analysis
The LN112-30 Lens Adaptor is used for creating a 30° focused beam spread when attached to a SL112 or SL162.
Advanced Illumination
Advanced Illumination® (Ai) is a leading developer and manufacturer of LED lighting and control technology for machine vision illumination. Founded in 1993, Advanced Illumination was the first company to bring LED lighting to market and has since become one of the most trusted names in the machine vision industry. Ai offers a number of highly customizable backlights, bar lights, coaxial lights, diffuse lights, line lights, bright field ring lights, dark field ring lights and spot lights. Whether you’re an OEM or an end user, Advanced Illumination has a knowledgeable team of engineers and manufacturing professionals ready to provide you with a solution tailored to your lighting needs.
Contact Details
Advanced Illumination, Inc.
440 State Garage Road, Rochester, VT 05767, USA
Phone: 802-767-3830
Fax: 802-767-2636
Imaging/Machine Vision
Download Line Card
Document
