Meatest - M192A Real-Resistance Load
-
Maximum load 3 kW and 250 Vrms
-
Real resistance function
-
Temperature coefficient < 10 ppm/°C
3000W power load based on Real-Resistance decade design with built-in multimeter for simulation of constant power and constant current functions.
M192A is accurate high power resistance decade for testing of power supplies and batteries up to 3000 W and 250 Vrms. Being a resistance decade rather than an electronic load, resistance function uses real resistance so it can be used with AC power sources as well. See datasheet for typical frequency responses. On top of that, M192A version has built-in test signal meter using which constant power and constant current functions can be simulated. Other advantages of the M192A are extended range up to 300 kΩ and continuous resistance range rather than fixed values.
Languages: English, German, Czech
Connectivity
All decades' functions can be remotely controlled via RS232 or GPIB interface. This way you can introduce calibration/test stage directly into production line of any resistance based sensor and reduce time required for final quality tests dramatically.
| Resistance |
15 Ω - 300 kΩ, continous range ± 0.1% / year |
Test Signal Meter
| DC voltage |
1 - 300 V, resolution 0.1 V ± 0.1% / year |
| AC voltage |
1 - 300 V, max 10 kHz, resolution 0.1 V ± 0.2% / year |
More Product Information
-
DC Voltage up to 100.0000 V, 20 ppm
-
DC Current up to 50.0000 mA, 50 ppm
-
Reference temperature range 13–33 °C
-
Resistance, frequency, RTD
-
TC simulation R, S, B, J, T, E, K, N, M, C, D, G2
-
GPIB, USB, RS-232 and ethernet interface
- Reduce service stoppages with a fanless design
- Inspect multiple sites through the support for four GigE Vision and four USB3 Vision cameras
- Simplify cabling for GigE Vision installations using Powerover-Ethernet (PoE)-enabled ports
- Tackle deep learning and traditional machine vision applications with a mobile-class embedded twelfth-generation Intel Core processor
- Connect separately to the factory floor and enterprise networks via two more Gigabit Ethernet ports
- Synchronize with other equipment using the integrated real-time digital I/Os with rotary encoder support and RS-232/RS-485 ports
- Streamline application development using the Aurora Design Assistant flowchart-based IDE or the Aurora Imaging Library SDK
- Tackle machine vision applications with utmost confidence using field-proven tools for analyzing, locating, classifying, measuring, reading, and verifying
- Direct PC bus access data acquisition system provides the required sampling rate and resolution to meet IEC 61000-4-7 measurement requirements and supports high-speed data transfers.
- PC-based Harmonic and Flicker test software provides real-time full-color data display updates and continuous PASS/FAIL monitoring.
- Automatic calculation of the maximum permissible system impedance Zsys, using the Zref and measured Flicker parameters, as required per EN/IEC 61000-3-11.
- Intuitive operating software provides IEC test setup, data analysis, display, with test reports in and MS Word format.
- High resolution, no gap acquisition data storage to ensure that all data can be streamed to disk (in ASCII format if needed) for later review and replay of the actual test.
- Single Step and Fast playback mode of test results.
-
12 GΩ and 5 kVdc limits
-
Voltage limit indication
-
Battery-powered
-
Remote control via RS232 bus
-
20 ppm accuracy
-
13°C - 33°C reference temp. range
-
100 V @ 25 mA output capacity
-
Real resistors switched by relays
-
14 decade range, resolution from 1 μΩ
-
Custom units and time sequences
-
No residual resistance
-
5 W load capacity
-
Six different languages
-
Automatic calibration of instruments
-
In line with ISO17025 and other metrology standards
-
Automated optical readout module for multimeters
-
Unlimited custom instruments and procedures
-
Maximum load 3 kW and 250 Vrms
-
Real resistance function
-
Temperature coefficient < 10 ppm/°C
-
Real resistors switched by relays
-
Custom temperature scales
-
No residual resistance
-
0.01°C accuracy
-
Six different languages
Meatest
We develop and manufacture electrical calibration instruments for calibration laboratories and testing facilities in electronics, engineering, utility, aeronautics and telecommunications sectors. Designed for automated calibrations our instruments bring effective solutions to customers like NPL, Samsung, Siemens and Volkswagen.
Contact Details
Meatest, spol. s r.o. Headquarters
Železná 509/3, Czech Republic - 619 00 BRNO
GPS: 49°10'13.93"N,16°36'53.2"E
Phone: 420-543-250-886
Fax: 420-543-250-890
Email: meatest@meatest.cz
Test & Measurement
Download Line Card
Document
