NoiseKen - Electromagnetic Field Visualization System / EPS-02Ev3
- This Large Area Diffuse Light provides extremely diffuse illumination over an area of 18” square (457mm).
- Available in a wide array of wavelengths, providing up to 7kLux at a 1” (25mm) standoff.
- At 13.6 pounds (6.2 kilograms), the DL071 is both rugged and lightweight.
Utilizing high power LEDs, the DL071 is engineered to provide uniform light for medium to large target area coverage.
The DL071 is best suited for inspection on curved surfaces where even illumination is necessary to avoid hot-spot reflections and where the working envelope is free of space constraints.
Similarly to the smaller DL194 and DL097 hemispherical domes, the DL071 is available in wide range of visible and NIR wavelengths, as well as a variery of control options.
General Specs
|
Category |
Specification |
Detail |
|||
|
Optical |
Available Wavelengths |
White, 455 nm, 470 nm, 505 nm, 530 nm, 590 nm, 625 nm, 850 nm, 940 nm |
|||
|
Available Lensing |
No Lenses |
||||
|
Available Light Conditioning |
Diffuser & or Polarizer |
||||
|
Electrical |
Power Consumption Info |
Refer to Datasheet for Details |
|||
|
Cable Info |
80" -0/+6" Long (2 m -0/+150 mm), 105°C Rated, Foil Shield w/ Drain |
||||
|
Mechanical |
Sizing Info | Standard | Length | 20.9" (530.9 mm) | Refer to Datasheet for Details |
| Width | 21.73" (552.0 mm) | ||||
| Height | 11.7" (297.3 mm) | ||||
|
Weight Info (Standard) |
~ 13.60 lbs (~6168 g) per Unit |
||||
|
Mounting Info |
M6 Mounting Nuts |
||||
|
Material Info |
Painted & Polyurethane Aluminum Housing, Acrylic Window, Nylon Strain Relief, PVC Cable Jacket, Steel Black Oxide Fasteners |
||||
|
Thermal |
Operating Case Temperatures |
25°C to 60°C |
|||
|
Operating Ambient Temperatures |
0°C to 35°C |
||||
|
Certification |
Compliance |
CE, RoHS, IEC 62471 |
|||
|
IP Rating |
Not Rated |
||||
|
Lumen Maintenance - White Only |
L70 (50,000 Hours) |
||||
Part Number Key
More Product Information
ULTRA UHC series polypropylene based broadband electromagnetic absorbers are the latest technology for RF test applications.
The polypropylene material has a highly uniform carbon density, throughout the material, which provides for more predictable results with no discontinuities.
It is the unique production technology which is the critical factor in achieving the highest electromagnetic reflectivity performance in an antenna measurement anechoic chamber or an emc chamber.
As an international EMC chamber supplier, we provide these polypropylene broadband absorbers for EMC test chambers worldwide.
This model is for carrying out a high pressure noise test of individual automotive manufacturers' demands. It simulates representative high voltage noise of HV and EV.
- Single-phase 3 wire
- AC85 - 240V16A
- 50/60Hz
- DC125V16A
- Pulse: ~ 500V 50kHz (option)
Our reverberation chamber is particularly suited for immunity testing for EMC measurement and special applications for very high-field strength applications (200V/m - 7000V/m). The paddle system ensures that the widest range of frequencies and particularly low frequency performance is maximized. This system meets testing requirements of the IEC61000-4-21 EMC testing specification.
The SPARTE 900 series antenna stands as a testament to reliability and performance, tailored for mission-critical applications where telemetry reception is paramount. This field-proven product ensures accurate tracking of flying targets, such as aircraft or space launch vehicles, even at significant distances, thanks to its high gain and large aperture design.
The robust and durable construction of the SPARTE 900 series guarantees optimal performance in any scenario: an aluminum-alloy reflector for enhanced surface accuracy, SCM tracking feeds for dependable and precise tracking, and dual-drive motors for redundancy and no-backlash operation.
Additionally, the SPARTE 900 series comes equipped with a riser that integrates the Antenna Drive cabinet and any necessary equipment, allowing for optimal positioning in close proximity to the antenna.
- 5 GigE Ethernet port & hardware
- Supports cable lengths up to 100 m (CAT-5e, CAT-6) or (4T-6A)
- Simplified set-up with field proven Sapera LT software featuring CamExpert
- Engineered to accommodate industrial environment with a ruggedized screw mount RJ-45 connector
The VS1510 is a video & data recorder/server packaged in a rugged compact chassis (4.92” x 5.75” x 7.28 ” / 9.9 lb), for recording on a Removable Memory Module (RMM).
Recorded data can be replayed in a standard PC/Windows® environment, using specific or COTS mission debrief solutions for post mission analysis.
In addition, typically for ISR applications, data can be replayed while recording on board. The ENERTEC™ mission data processing and distribution units offer cost-effective and dependable solutions for collecting, processing, storing, utilizing, and sharing field and mission data.
These units are designed for both manned and unmanned ground, air, and sea vehicles. They undergo rigorous validation and formal qualification testing, conforming to established standards such as DO-160 and MIL-STD-810.
- The DF242 is characterized as a Large Low Angle Dark Field ring light.
- Precisely aimed LEDs provide a very low angle of incidence, radial illumination pattern.
- A scratch on a sheet of glass is a good example of a defect that can be detected easily with a low-angle dark field illuminator.
- With a light intensity of 24kLux at a working distance of 1” (25mm), the DF242 is perfect for imaging problems with medium sized fields of view.
- A 35mm field of view is standard with optional fields of view of 45 and 70mm.
- Available in a range of wavelengths from UV to IR.
*Engineered to provide comparable optical characteristics to our previous RL1660.
Southwest Microwave offers an array of field replaceable cable connectors, direct solder cable connectors and direct solder flange mount cable terminations. Contact us for high-performance .047, .086 and .141 flex cable assemblies or harnesses up to 110 GHz, delivering the industry’s lowest VSWR and insertion loss.
- 4 Independent Channels, 1 Output Connector
- Includes built-in pre-programmed sequencing.
- Provides control for computational imaging, including photometric stereo, extended depth of field, combined bright field + dark field, high dynamic range, and high resolution color.
- Ideal for multi-channel lights and multi-light stations. Due to power output constraints, some configurable light lengths may be limited.
- Housed within a compact enclosure with DIN rail mounting.
- Driven with SignaTech™ for improved safety and easy operation.
NOTE: NOT COMPATIBLE WITH C1 CONNECTORS
NoiseKen
For over 40 years from its foundation in 1975, Noise Laboratory has been focusing on immunity test equipment and related solutions.
Now their product lines include various types of immunity test equipment ranging from those conforming to IEC 61000-4 series standards, other international or national immunity standards and even to customer's in-house test standards.
Contact Details
Shinyei Corporation of America Head Office - Sole Authorized distributor of NoiseKen products
