Anritsu - MS2090A Field Master Pro™ RF spectrum analyzer

  • 9 kHz to 9/14/20/26.5/32/43.5/54 GHz
  • DANL: -164 dBm (with preamp)
  • TOI: +20 dBm (typical) Analysis bandwidth: 150 MHz
  • Amp range: DANL to +30 dBm
  • Phase noise at 1 GHz: -110 dBc/Hz @ 100 kHz offset (typical)
  • Demodulation: 5GNR, LTE FDD/TDD, RF, and modulation quality plus SSB signal analysis
  • Resolution bandwidth (RBW): 1 Hz to 10 MHz
  • Sweep Speed: 40 GHz/second (full span)
  • RTSA bandwidth: 22, 55, 120, 150 MHz (option dependent)
  • Amplitude accuracy: < 14 GHz ± 1.3 dB (± 0.5 dB, typical)
  • Zero span with 60 ns minimum span
  • IQ capture and streaming
  • AM/FM modulation quality measurements
  • Built-in PDF/HTML report generation
  • EMF Measurements
  • Uplink/Downlink interference analysis
  • Interference hunting
  • Channel Scanner
  • Coverage Mapping

Applications

Delivering the highest levels of performance available in a handheld RF spectrum analyzer, the Field Master Pro MS2090A instrument gives field engineers and technicians unparalleled measurement accuracy previously reserved for only benchtop instruments.

  • Interference hunting and spectrum clearing – fast sweep speeds a low distortion front-end and the Real Time spectrum analyzer combine to quickly identify interfering signals. A special interference finder option adds AM/FM demodulation with audio output plus interfering source triangulation on a digital map to pinpoint and identify the location and source of interference.
  • Broadcast transmitter analysis – a comprehensive range of transmitter measurements – including: AM/FM modulation quality measurements, harmonic, spurious, occupied bandwidth, channel power, and adjacent channel power – ensures conformity to regulatory requirements.
  • Microwave radio links – with a frequency option up to 54 GHz and exceptional sensitivity for dish alignment, power and modulation bandwidth can be verified during installation or maintenance testing with a waveguide horn antenna.
  • Satellite system monitoring – ideal for monitoring downlink signals to search for interference and noise
  • Pulse Radar Measurements - The wide bandwidth of the MS2090A enables detailed analysis of pulsed radar signals. In zero span, resolution bandwidth can be set as high as 40 MHz (option dependent), enabling a sweep time as low as 60 ns and amplitude measurements of pulses as narrow as 20 ns.
  • LTE base station measurements – OTA or direct connect measurements in single or multi channel configurations 
    • Cell ID, Sector ID, Cell Group
    • Frequency Error and Time Offset
    • PBCH, RS, and SS Power
    • Signal Quality (EVM)
    • MIMO Antenna Power and Time Alignment Error (TAE)
    • Channel Power and Occupied Bandwidth
    • TDD Frame Power
    • ACLR and Spectral Emissions Masks
    • Time Alignment Error
    • Resource Block Usage
    • OFDM Symbol Transmit Power (OSTP)
    • Time gated Uplink interference measurements
    • RSRP based coverage mapping with PCI information
    • Multi frequency network measurements with carrier aggregation
  • 5GNR base station measurement – validate the performance of the gNB base station with essential measurements that are in full compliance with 3GPP TS 38.104 V15, including: 
    • frequency error
    • time offset
    • cell/sector ID
    • SSB: RSRP, RSRQ, SINR
    • modulation quality
    • unwanted emissions
    • occupied bandwidth
    • adjacent channel leakage ratio
    • transmitter harmonics and spurious
    • EIRP
    • Time gated Uplink interference measurements
    • RSRP based coverage mapping with PCI information
    • Multi frequency network measurements with carrier aggregation
  • LTE and 5G coverage mapping – receive a clear representation of the signal strength of 5G transmitters over intended geographic area by continuously measuring RF data – including 5G channel power, EIRP, or RSRP – with results graphically displayed on a digital map or building floor plan.
  • Cable and Antenna measurements – Line sweep RF cables and antennas at base station locations with accessory S331P Site Master

Specifications

Frequency Range

MS2090A-0709 9 kHz to 9 GHz

MS2090A-0714 9 kHz to 14 GHz

MS2090A-0720 9 kHz to 20 GHz

MS2090A-0726 9 kHz to 26.5 GHz

MS2090A-0732 9 kHz to 32 GHz

MS2090A-0743 9 kHz to 43.5 GHz

MS2090A-0754 9 kHz to 54 GHz

DANL (w/preamp) 

-164 dBm 

TOI

+20 dBm 

Analysis bandwidth 

150 MHz 

Demodulation

5GNR, LTE FDD/TDD, RF, and modulation quality plus SSB signal analysis 

Amplitude range 

DANL to +30 dBm 

Phase noise at 1 GHz 

-110 dBc/Hz @ 100 kHz offset (typical) 

Resolution bandwidth (RBW) 

1 Hz to 10 MHz 

Input SWR 

1.5

Amplitude accuracy 

< 14 GHz ±1.3 dB (±0.5 dB typical) 

RTSA bandwidth 

22, 55, 120, 150 MHz (option dependent) 

More Product Information

Anritsu

Since its founding in 1895, Anritsu has been a pioneer in the telecommunications field, marking its 120 years of growth with achievements that include creating the world’ s first practical wireless telephone, which paved the way for today’s smartphones. We would like to express our sincere gratitude to our customers and everyone else who has made this possible.

With its measurement business as the pillar supporting the further advancement of its mobile broadband services, Anritsu offers solutions that are indispensable for building a safer and more secure society in a broad range of fields including quality assurance inspection equipment for foods and pharmaceutical products, remote monitoring and control systems, traffic shapers, and high-speed electronic devices.


Contact Details

US Headquarters Anritsu Corporation

490 Jarvis Drive, Morgan Hill, CA 95037-2809

Phone (Toll-free/All locations): 1-800-Anritsu (1-800-267-4878) for Sales, Technical and Service

Contact page

Test & Measurement

Download Line Card
Anritsu ms2090a-hero-new