EMC test equipment to evaluate the resistibility of electronic devices and components when energy charged on a human body or object is discharged to the electronic devices and components. NoiseKen brand ESD simulator is available to see malfunctions or function declines of electronic equipment for appropriate evaluations compliant with IEC 61000-4-2 Ed.2 Test Standard, ISO 10605 Ed.2 Test Standard & ISO 10605 Ed.3 Test Standard. 

The ESS-S3011A features a function which enables the user to pre-program test settings to minimize setup errors as well as having the unit be incorporated into a remote or autonomous testing setup. Another feature that sets apart NoiseKen ESD guns to that of competitors is the discharging gun separation design which helps achieve the lightweight. 

For conventional ESD guns, that have generators that are inseparable from the gun, you may experience having to replace the whole unit even only when certain parts of the unit are broken. However, with the NoiseKen’s separation design, replacement parts can be minimized to lower the running cost.

NoiseKen simulators to reproduce fast rise-up noises which are generated when switching ON / OFF electric current on the inductive load. 

Since the pulse includes broadband frequency and its rise-up time is fast at 3ns or less, it can make the noise coupling dense and effective to reproduce the malfunctions of electronics equipment under the test. 

It can realize performance evaluation of electronics equipment's upon reproduction of line noises which are intruded to the power supply lines or induced noises onto the telecommunication lines.

This model is for carrying out a high pressure noise test of individual automotive manufacturers' demands. It simulates representative high voltage noise of HV and EV.

• Single-phase 3 wire 
• AC85 - 240V16A 
• 50/60Hz 
• DC125V16A 
• Pulse: ~ 500V 50kHz (option)

The Broadband sleeve antenna was developed to efficiently perform proximity radiation immunity testing.

The international standards ISO11451-3/ISO11452-9 stipulate proximity radiation immunity testing methods that assume electromagnetic interference when wireless transmitters such as smartphones and Wi-Fi devices are placed in close proximity to other electronic devices.

This product is a small, lightweight, high-gain antenna used in these standards that covers a wide bandwidth and has good radiation characteristics. Since it can be used in the wide band from 5GHz to 8GHz, it can be used to perform proximity radiation immunity testing assuming wireless LAN in the 6GHz band (up to 7.125GHz).

The ESD voltage meter MODEL: 18-00086B is a device that can measure the voltageholding time (holding voltage after 5 seconds) and output

specifications during the air discharge test in IEC 61000-4-2.The measured voltage is displayed on a 7-segment LED with peak and holding voltage values.

• Easily measure the Hold Time, the tester specification for air-discharge testing.
• Measure the output voltage from ±2kV to 30kV.
• Monitor the measured voltage waveform by connecting to an oscilloscope.
• Compact, lightweight and easy to carry.

Most of us know Z400 as the Nordic god of thunder and lightning. But in the world of Ethernet testing world, Thor plays a starring role in Xena’s Ethernet Traffic Generation solutions.

Thor boasts some truly heroic features – like being able to test both NRZ and PAM4 speeds. For NRZ based Ethernet at data rates of 10G / 25G / 40G / 50G and 100G. And for PAM4 based Ethernet at data rates of 50G / 100G / 200G / 400G. It can also test Auto-Negotiation and Link Training (AN/LT).

In the Xena line we also have Z10 Odin (NRZ testing 10Mbps to 10G), Z100 Loki (NRZ testing 10G to 100G), and Z800 Freya (10G PAM4 to 800G PAM4) and in the future also 1.6 Terabits.

• A real-time diagnostic tool supports EMC/EMI debugging. 
• Fast visualize EMC/EMI problems. 
• Enables easy comparison of countermeasures before and after. 
• Capable of measurement from entire products to single components. 
• Factor-editor function provides correction of antenna characteristics, cable loss and preamplifier. 
• User friendly compact design. 
• Customer supplied spectrum and probes acceptable (Please consult)

RAPIDO is a multi-site programmer for inline programming and testing.

Are you developing your next electronic assembly and are dealing with "test and programming" concerns?

Your complex boards feature difficult to contact fine-pitch components (e.g. BGA, FPGA) while test and programming still must be efficient?

RAPIDO is an outstanding, "lightning-fast" solution for programming and test using embedded system access (ESA) technologies. Special mechanics ensure precise board contacting from both sides, even for high probe counts.

The system can easily be integrated into a production line, keeping up even with high-volume manufacturing cycle times.

Simulator to reproduce various transient surge phenomena which are generated in a vehicle and required in the international standard ISO-7637-2 (2004) Standard, and evaluate the immune resistibility of the equipped electronics devices against the surge. 

• ISO 7637-2 (2004) Standard compliant simulator 
• Correspondent to the test for 12V/24V/42V systems in a vehicle 
• Stand-alone usage per the each generator unit possible as well as the comprehensive control 
• Large capacity CDN (60V/50A) available (Option) 
• Up to 200A power supply possible (Option) 
• Windows in Japanese applicable for the software program as well

_{Private standards or specifications by manufactures can be responded upon request.}