Advanced Illumination - MP-ICS - Manual Dimming Accessory
- 0 – 100% intensity control
- For use with lights built with an ICS 2 after 3/1/2012
- NOT COMPATIBLE with LLI37, BLI38, LLI67, and BLI68 “IC” Lights
General Specs
|
Length |
89.0mm (3.50in) |
|---|---|
|
Width |
60.2mm (2.37in) |
|
Height |
53.8mm (2.12in) |
|
Weight |
59.5g |
|
Operating Temperature |
-25°C to 57°C |
|
Compliance |
CE, RoHS |
Mechanical Specs

Electrical Specs

Part Number Key

More Product Information
The LL330 Series provides a sealed high intensity line light solution for demanding industrial environments. Engineered to withstand harsh conditions, these line lights are completely protected from dust and debris, ensuring reliable performance where other lights fail. In addition, passive thermal management eliminates the need for active cooling fans, contributing to low-maintenance, long-term operation.
The LL330 is available with an embedded control option, designed for continuous operation and housed within the configured light head. With options for converging or collimating optics, this series is suited for a variety of application needs. The LL330 is ideal for sheetrock, lumber, ceramics, stone, and other industries utilizing line scan imaging where airborne particulate, dust, and debris are concerns.
Customers can leverage our multi-tier approach to customization to reduce engineering costs.
- Our adaptable Build-to-Order (BTO) system provides for very short lead times and allows a product to be configured from a large set of predetermined parameters, with hundreds of thousands of BTO combinations available. BTO products are indicated in the product data-sheet and are shipped within 1-3 weeks, depending on the product.
- Our Semi-Custom products require some additional design and documentation effort but can be a smart choice when more flexibility is required.
- Lastly, a full Custom product can be developed when your budget and time frame allows. This option supplies you with a fully custom-designed and built lighting solution that will be engineered to fit your exact machine vision needs.
- Smallest rotary stage: 11.75 x 21.9 x 16 mm
- Embedded closed-loop controller
- No separate electronics needed
- 3.3 VDC input
- Accepts direct motion commands (I2C, SPI, or UART)
- Continuous 360° rotary motion
- Angular resolution ~21.9727 mdeg closed loop
- Built-in absolute position sensor
- Millisecond step and settle times
- 0.5 deg in 16 ms closed loop
- 0.5 deg in 1.2 ms open loop
- Holds position with zero power and no jitter
- The I3 and I3S Inline Controllers provide overdrive strobe and continuous operation to lights from a small package when larger, more versatile external controllers are not necessary.
- Switching between continuous-on, gating on/off and strobe overdrive is seamless. The I3 and I3S employ Ai’s exclusive Adaptive OverdriveTM that optimizes strobe power regardless of input Pulse Width.
- The I3 is a default-on device on power-up, whereas the I3S is a default-off device, requiring a trigger to illuminate.
- All ICS models employ reverse input polarity protection.
- Provides continuous-on and DC gating on/off control as well as 0-10 volt analog dimming. 30 uSec response time.
- A wash down version of all ICS drivers is provided automatically with any wash down light to which it is attached.
- 0 – 100% Intensity Control with optional DCS-MP, purchased separately, will provide manual intensity control via an external potentiometer.
- The Direct PC bus access data acquisition system provides the required sampling rate and resolution to meet IEC 61000-4-7 measurement requirements and supports high-speed data transfers.
- PC-based Harmonic and Flicker test software provides real-time full-color data display updates and continuous PASS/FAIL monitoring.
- Automatic calculation of the maximum permissible system impedance Zsys, using the Zref and measured Flicker parameters, as required per EN/IEC 61000-3-11.
- Intuitive operating software provides IEC test setup, data analysis, display, with test reports in and MS Word format.
- High resolution, no gap acquisition data storage to ensure that all data can be streamed to disk (in ASCII format if needed) for later review and replay of the actual test.
- Single Step and Fast playback mode of test results.
- For use with the SL256 Pattern Projecting Spot Lights
- Five field-replaceable standard patterns available
- 0.050mm line width photolithography
- Reticles include spanner wrench
- Please contact Ai for custom reticle patterns
- The Direct PC bus access data acquisition system provides the required sampling rate and resolution to meet IEC 61000-4-7 measurement requirements and supports high-speed data transfers.
- PC-based Harmonic and Flicker test software provides real-time full-color data display updates and continuous PASS/FAIL monitoring.
- Automatic calculation of the maximum permissible system impedance Zsys, using the Zref and measured Flicker parameters, as required per EN/IEC 61000-3-11.
- Intuitive operating software provides IEC test setup, data analysis, display, with test reports in and MS Word format.
- High resolution, no gap acquisition data storage to ensure that all data can be streamed to disk (in ASCII format if needed) for later review and replay of the actual test.
- Single Step and Fast playback mode of test results.
- Measuring device for large extrusion tools up to 35 mm (1.37“) hole diameter
- Automated measurement process
- Focus indicator allows you to easily adjust the focus
- Homogeneous transmitted light illumination - made by iiM GmbH - for the ideal presentation of the area to measured
- The influence of the user is reduced to a minimum
- Robust, ergonomic design
- Ideal addition to the 2-camera system VCPEx+
- 1.3" (24 mm) max. sensor size
- Resolution down to 2.4µm pixel size
- Low chief ray angle suits all SONY Pregius™ generations
- 8 focal lengths: 16 mm - 50 mm
- Initial aperture: F2 - F2.8
Advanced Illumination
Machine Vision Lighting Solutions