• To simplify the mounting process, Ai offers a line of camera brackets for positioning lights under or around the camera lens. 
• Most brackets are designed to be held in place by the same screw that secures the camera.

• The RL127 is characterized as a Large High Dispersion Bright Field ring light. 
• Non-lensed LEDs disperse light at broad angles, providing “soft” lighting for applications that require short to medium working distances. 
• The low-profile design is only .75” (19mm) thick, with an O.D. of 4.6” (117mm) and I.D. of 2.61” (66.3mm) allowing it to be used in space constrained applications. 
• The I.D. provides a standard 67mm diameter thread with a pitch of .75mm for further mounting flexibility. 
• A wide variety of wavelengths are available from UV to IR. An optional polarizer and/or diffuser may be used to further condition the light output. 
• The RL121 delivers 20kLux at a working distance of 100mm.

• S-parameters DC to 40 GHz, single-ended and mixed-mode 
• Impedance Profile with <1 mm resolution, differential and common-mode 
• Internal, automatic OSLT calibration 
• USB-connected, small, lightweight 
• Flexible display of the measurements 
• Remove effects from fixtures, connectors and cables 
• Emulate eye diagrams with CTLE, DFE and FFE equalization 
• Advanced jitter analysis

• The SL1236 is characterized as a Large Aimed Spot Light. 
• Precisely aimed LEDs provide a level of lighting control not found in traditional illuminators. 
• A range of standoffs and fields of view may be specified at the time of order. 
• The spot light is available in a wide range of wavelengths from UV to IR, including a 3 channel RGB version. 
• Diffuser and polarizer options are also available. 
• The SL1236 provides 14kLux at a working distance of 4” (100mm).

Advanced Illumination’s AD-I3-CGX2 adaptor cable is for connecting I3/I3S configured lights with Cognex Gen2 Cameras. By default, an I3/I3S controller can connect directly to a Cognex Gen1 Camera but needs this adaptor to connect to a Cognex Gen2 Camera.

• The RL2316 is characterized as a Compact Aimed Bright Field ring light. 
• Precisely aimed LEDs provide a level of lighting control not found in traditional illuminators. 
• A range of standoffs and fields of view may be specified at the time of order. 
• The ring light is available in a wide range of wavelengths from UV to IR. 
• Diffuser and polarizer options are also available. 
• With its compact form factor, the RL2316 is ideal for the inspection of smaller, non-specular objects and where space for the illuminator is limited.

Our “A” and “W” Series amplifiers have the power to deliver all the field strength you need. With unsurpassed mismatch capabilities and excellent flatness, they provide all the power promised over the entire operating band. 

We subject our amplifiers to the harshest conditions just to make sure they give you reliable service and performance over the long haul. We test them under various output VSWR loads to stress them to the limit. The only problem we ran into was that there were no available loads to handle the enormous power up to 80,000 W that our amplifiers deliver. Whereas this would stop most manufacturers, it presented another challenge to our talented designers, and we designed our own. All our RF solid-state amplifiers have modulation capability that will faithfully reproduce AM, FM or Pulse Modulation appearing on the input signal for use in the most demanding EMC applications. 

These technologically advanced amplifiers perform beyond the norm, beyond expectations, and way beyond the abilities of other test amplifiers. 

These self-contained, broadband, completely solid-state amplifiers are designed for applications requiring the ultimate in output power over a wide instantaneous bandwidth with high gain. Extensive control and status reporting capabilities are available both locally and remotely. Most models feature air-cooled designs while some higher power units feature liquid cooled designs. The touch-screen panels are intuitive, convenient, and easy to use.

• The SL2420 is characterized as a Medium Aimed Spot Light. 
• Precisely aimed LEDs provide a level of lighting control not found in traditional illuminators. 
• A range of standoffs and fields of view may be specified at the time of order. 
• The spot light is available in a wide range of wavelengths from UV to IR. 
• Diffuser and polarizer options are also available. 
• The SL2420 provides 10.1kLux at a working distance of 4” (100mm).

When test needs call for higher power and higher frequency, consider our “T” Series microwave amplifier line– 1 to 50 GHz, 40 to 20,000 W CW and Pulse. These amplifiers provide coverage for a wider range of high-power microwave test applications than any other brand of microwave amplifier on the market and are incredibly feature-rich. 

They also offer an advanced design and highest quality construction of any TWT amplifier on the market.