Transmission line probes are a special type of passive probe designed for use at very high frequencies. They replace the high impedance probe cable found in a traditional passive probe with a precision transmission line, with a characteristic impedance that matches the oscilloscope input (50 Ohm). This greatly reduces the input capacitance to a fraction of a picofarad, minimizing the loading of high frequency signals. A matching network at the tip increases the DC input resistance. While they have lower DC input resistance than a traditional passive probe (usually 500 Ohm) to 1kOhm), the input impedance of these probes remains nearly constant over their entire frequency range.

Choice of 4 GHz or 6 GHz bandwidth models  Up to 5 Vpk-pk dynamic range with low noise  ±3 V offset range  Low loading and high impedance for minimal signal disturbance  Ideal for DDR2, DDR3, LPDDR2  Deluxe soft carrying case  Innovative QuickLink architecture  Wide variety of tips and leads  Solder-In Lead  Optional Positioner (Browser) Tip  Quick Connect Lead  Square Pin Lead  HiTemp Solder-In Lead

Up to 20 GHz bandwidth and 80 GS/s sample rate  The most advanced oscilloscope user interface  The industry’s only true hardware 14.1 Gb/s serial trigger  Low Jitter Measurement Floor and exceptional timebase stability  Comprehensive set of serial data analysis, debug, validation and compliance tools  Integrated 50 Ω and 1 MΩ inputs for true connection and probing flexibility  Integrated standard and custom measurements and math functions for unrivaled analysis capability  Multi-lane serial data eye, jitter and crosstalk analysis  Real-time de-embedding, emulation, and equalization

 HD4096 technology provides 12-bit resolution up to 8 GHz and 20 GS/s Up to 5 Gpts of acquisition memory enables detailed viewing of long events 15.6" 1900 x 1080 Full HD capacitive touchscreen

S-parameters DC to 40 GHz, single-ended and mixed-mode  Impedance Profile with <1 mm resolution, differential and common-mode  Internal, automatic OSLT calibration  USB-connected, small, lightweight  Flexible display of the measurements  Remove effects from fixtures, connectors and cables  Emulate eye diagrams with CTLE, DFE and FFE equalization  Advanced jitter analysis

Highest resolution – 12 bits all the time More channels, flexibility – 8 analog and 16 digital channels Longest Memory – 5 Gpt records with simple navigation – no compromise View 16 channels on one display with OscilloSYNC™

500 MHz - 4 GHz bandwidths  Up to 40 GS/s sample rate  15.4” capacitive touch screen  MAUI with OneTouch  Powerful, Deep Toolbox  Exceptional Serial Data Tools  16 digital channels with 1.25 GS/s  Huge Applied Offset Range  Optional Application Packages

100 MHz, 200 MHz, 350 MHz, 500 MHz and 1 GHz bandwidths  Up to 4 GS/s sample rate  Long Memory – up to 20 Mpts  10.1” capacitive touch screen display  16 Digital Channel MSO option  MAUI - Most Advanced User Interface  Designed for Touch  Built for Simplicity  Made to Solve  Advanced Anomaly Detection  Fast Waveform Update  History Mode - Waveform Playback  WaveScan - Search and Find  Multi-Instrument Capabilities  Protocol Analysis - Serial Trigger and Decode  Waveform Generation - Built-in Function Generator 

Highest resolution – 12 bits all the time  More capability – integrates multiple instruments into one  Comprehensive probe support – supports over 30 probes in 9 categories  MAUI with OneTouch user interface for intuitive and efficient operation

With the ProBus interface, the ZD500, 1000, and 1500 becomes an integral part of the oscilloscope. All probe gain and offset controls are transparent to the user, making it easier to probe the circuit without concern for which gain setting to choose. When used with a LeCroy digital oscilloscope, no external power supply is required.

With the ProBus interface, the ZD500, 1000, and 1500 becomes an integral part of the oscilloscope. All probe gain and offset controls are transparent to the user, making it easier to probe the circuit without concern for which gain setting to choose. When used with a LeCroy digital oscilloscope, no external power supply is required.

With the ProBus interface, the ZD200 becomes an integral part of the oscilloscope. The probe sensitivity and offset are automatically optimized based on the oscilloscope gain settings, so control is transparent to the user. When used with a LeCroy digital oscilloscope, no external power supply is required.