Precise programming of voltage and current slew rate for sensitive loads. Modules within one chassis can be connected to different loads and controlled independently. Industrial field bus interface (Modbus-TCP, Modbus-RTU, Ethernet/IP (Industrial Protocol)) enable real-time digital control.

3 independent, isolated 600W channels Total power density up to 1800W in a 1U chassis 4 autoranging output channel options Intuitive color touch panel control

Three independent, isolated 1,700W channels, 5,100W total 1U rack-mount chassis Eight output options Multi-language, intuitive, color touch panel control

High power density in a 1U chassis (up to 5 kW) or a 2U chassis (up to 10 kW) Intuitive touch panel control Available in either Fixed or Autoranging output Multi-language display for global operation

Energy absorber with a rating of 400VDC at ±150A Provides up to 400V at 150A for 60kW of output power. Energy Absorber Load chassis creates a total resistance of approximately 1.5 Ohms at 30kW continuous and 60kW peak

High power density / low ripple and noise High programming resolution with Ethernet interface Constant voltage and current mode Remote sensing

High Power Density : 3 kW and 4 kW models, 2U (3½” high), (19” wide); no top or bottom clearance spacing required Preview Push-button : Overvoltage protection (OVP), voltage and current preview buttons Remote Voltage Sense : Sense leads are easily connected to a solderless connector

High Power Density: 600 watts in 1U (1.75 inches) high, half rack (8.5 inches) wide; no top or bottom clearance spacing required. Near Linear Ripple & Noise Ripple as low as 2.5mV rms, noise as low as 15mV p-p. Remote Control

High Power Density up to 150KW in a single bay rack-mount cabinet. Up to 240KW in a dual bay rack. Fast Load Transient Response: Protection from undesired voltage excursions Fast Slew Rate with exceptional rise/fall times for speed-critical applications

Single system power up to 650 kW  Parallel system power up to 1.3 MW  Bidirectional output voltage up to 1,000 V  Bidirectional output current up to ±1,000 A, up to ±2,000A in parallel  Available in 1, 2 or 4 channel configurations  Multiple channel units share internal DC Bus up to 2MW without drawing additional power from the AC Grid  Regenerative to 96%  Large 15-inch color touch panel  Short circuit proof  Designed for safety to EN ISO 13849-1  Dedicated Battery Testing/Simulation Modes  Seamless transition between source and sink  High reliability, long life components

High Power Density: Up to 15 kW in a 3U / 30 kW in a 6U chassis Wide Voltage Range: 0-40V up to 0-600V, in increments of 5 kW from 5 to 30 kW Fast Load Transient Response: Protection from undesired voltage excursions

High Power Density: up to 15 kW in 3U, 30 kW in a 6U chassis Wide Voltage Range: 0-10V up to 0-1000V, from 4 to 30 kW Fast Load Transient Response: Protection from undesired voltage excursions Low Ripple and Noise