Teledyne DALSA - Pylon IR Low-Noise, Deep Cooled, InGaAs Spectroscopy Camera
The PyLoN®-IR is a controllerless, cryogenically-cooled InGaAs array designed for quantitative, scientific spectroscopy applications demanding the highest possible sensitivity. PyLoN-IR is the ideal camera for high-performance, near-infrared and SWIR spectroscopy.
Broad Spectral Range
The PyLoN IR offers high sensitivity over the 800 – 2200 nm spectral range.
The PyLoN-IR: 1024-1.7 provides >85% QE from 800 – 1700 nm, with the PyLoN-IR: 1024-2.2 offering 75% QE from 1000 – 2200 nm.
Ultimate Flexibility and Speed
Dual-amplifier readout design allows for optimization of system performance. The high sensitivity amplifier reduces read noise for weak signals, and the high capacity amplifier offering increased effective dynamic range.
In addition, the PyLoN IR offers 16-bit digitization at all speeds and leads the industry with the fastest spectral rate (up to 6600 spectra/sec) and lowest system read noise.
Cryogenic Cooling
Cooled to -100℃, the PyLoN IR delivers ultralow dark current for exposures up to several minutes. A new, redesigned cold shield reduces ambient thermal noise.
A single input window offers maximum sensitivity, with once a day refill requirement. Experimental flexibility is also offered with optional end-on and all-directional dewars.
Powered by LightField software
Powerful and intuitive software with built-in math engine allows for the complete control of cameras and spectrographs, with real-time image analysis and spectral data.
LightField software provides seamless integration of hardware controls and direct data acquisition into programmes such as National Instruments’ LabVIEW® and MathWorks’ MATLAB®. This software also fully supports IntelliCal automated wavelength and intensity calibration.
The PyLoN IR can also be fully controlled by PICAM SDK, eliminating any overhead that can occur when communicating through other development environments.
Family Specifications
|
Spectral Rate |
6600 spectra/sec |
|---|---|
|
Typical Spectrometric Well Capacity |
Low gain: 120 Me-, 100 Me- min High gain: 4.5 Me-, 4 Me- min |
|
Digitization |
16 bits |
|
Minimum Exposure |
20 μs |
|
Sensor Type |
Linear InGaAs photodiode array |
Models
|
Model Number |
Pixel Size (μm) |
Read Noise |
FWC |
QE |
|---|---|---|---|---|
|
25 µm x 500 µm |
Low gain: 5000 e- High gain: 400 e- |
Low gain: 120 Me- High gain: 4.5 Me- |
0.88 |
|
|
PyLoN-IR 2.2 PYR-1024-22 |
Low gain: 6000 e- High gain: 400 e- |
Low gain: 110 Me- High gain: 4.1 Me- |
0.7 |
More Product Information
- Back-illuminated CCD sensors with >95% QE (over ~5 eV to 30 keV range)
- 2k x 2k and 4k x 4k formats; 13.5 and 15 micron pixels
- High frame rates with up to 4-port readout
- Cooling down to -90ºC using liquid or air
PIXIS-XO highly sensitive, thermoelectrically cooled cameras utilize various back-illuminated CCDs without antireflective coating for direct detection of x-rays. A rotatable ConFlat flange with a high-vacuum-seal design make these cameras well suited for UHV applications.
KURO is the first back-illuminated scientific CMOS camera. With high sensitivity and fast frame rates the KURO is optimal for applications such as hyperspectral imaging, astronomy, cold-atom imaging, quantum imaging, fluorescence spectroscopy, and high-speed spectroscopy
- 2, 4 and 8 channel configurations
- 16-bit vertical resolution
- Sample Rate up to 12,32 GS/s with RF mode
- 16-bit vertical resolution.
- 4 GSample waveform memory per channel
- Up to 5 Vpp Output Voltage and ±2.5 V Baseline Offset (into 50?)
- 1 MHz max line rate
- 65dB dynamic range
- Onchip 2x binning
- Mono/HDR/HFW
- Multi-arrays TDI
- Dual CLHS CX4 AOC output
- High signal fidelity to 4 GHz bandwidth
- Low circuit loading – High input impedance and low capacitance
- 4 GHz, 2.5 GHz, 1.5 GHz and 1 GHz models
- 1 MΩ input resistance
- 0.6 pF (4 GHz) and 0.9 pF input capacitance
- ± 8 V input dynamic range, ± 12 V offset range
- Wide variety of tips and grounds
- Easy to use, integrated with oscilloscope
- Industry’s latest CMOS image sensors
- Simplified set-up with field proven Sapera LT software featuring CamExpert
- Engineered to accommodate industrial environment with a ruggedized screw mount SDR connectors
- GenICan GenCP compliant
- Extended Spectral Range
- Capture images from visible light to SWIR (400 nm to 1700 nm) and enhance detection and analysis across various materials and applications.
- Compact and Balanced Design
- The compact housing balances image performance and size. It is ideal for space-constrained environments without compromising image quality.
- GigE Performance and Reliability
- GigE driver performance with the Spinnaker® SDK, Sapera™ Processing, and a powerful Trigger-to-Image Reliability (T2IR) framework.
- Fully integrated smart vision system
- Mono and Color CCD sensor options
- Ultra small form factor 44 x 44 x 44 mm
- Industrial IP67 Housing
- Easy application setup via Laptop or PC
- M4 mounting holes on each surface
- Connects to standard vision lights
- Utilizes factory M12 style cordsets
- No software to install
Teledyne DALSA
Teledyne DALSA is an international leader in high performance digital imaging and semiconductors with approximately 1000 employees world-wide. Established in 1980 and acquired by Teledyne Technologies in 2011, Teledyne DALSA designs, develops, manufactures, and markets digital imaging products and solutions, in addition to providing semiconductor products and services. Our core competencies are in specialized integrated circuit and electronics technology, software, and highly engineered semiconductor wafer processing.
Teledyne DALSA exists for the long term. Our goal is to build upon our 30 year heritage of developing the world's leading high performance digital imaging and semiconductor solutions and to accelerate our level of innovation. We focus on R&D development but also draw on the capabilities available to us as part of a larger organization. We seek to deliver products and technology that are truly innovative so that we can help our customers succeed.
Contact Details
Teledyne DALSA Headquarters
605 McMurray Road, Waterloo, Ontario, Canada N2V 2E9
Phone: 519-886-6000
Fax: 519-886-8023
Imaging/Machine Vision
Download Line Card
