Teledyne DALSA - KURO Back-Illuminated CMOS
KURO is the first back-illuminated scientific CMOS camera. With high sensitivity and fast frame rates the KURO is optimal for applications such as hyperspectral imaging, astronomy, cold-atom imaging, quantum imaging, fluorescence spectroscopy, and high-speed spectroscopy
Highly Sensitive
Using a back-illuminated sCMOS detector, the KURO is able to deliver >95% quantum efficiency with 100% fill factor matching that of the most sensitive CCD detectors available.
With no masked pixel area, the KURO is able to recapture light regardless of the incident angle, ensuring maximum photon capture.
Reduced Fixed-Pattern Noise
Latest sCMOS fabrication technology allows the KURO to provide a significantly better noise profile than any previous-generation, front-illuminated sCMOS camera.
High Speed, Low Read Noise
With an extremely low 1.3 e- (rms) read noise, the KURO is able to deliver high quality images with very low signal.
Taking advantage of sCMOS architecture, the KURO 1200B delivers high frame rates of 82 fps (12 bits) or 41 fps (16 bits), with the KURO 2048B delivering 47 fps (12 bits) or 23 fps (16 bits).
Large Pixel Size
Taking advantage of an 11 μm2 pixel pitch the KURO sensor captures 2.8x more photons than previous generation sCMOS sensors. Each pixel is also capable of handling a large full well of 80,000 electrons, allowing for excellent dynamic range.
Powered by LightField Software
Powerful and intuitive software with built-in math engine allows for the complete control of cameras and spectrographs, with real-time image analysis and spectral data.
LightField software provides seamless integration of hardware controls and direct data acquisition into programs such as National Instruments’ LabVIEW® and MathWorks’ MATLAB®. This software also fully supports IntelliCal automated wavelength and intensity calibration.
The KURO can also be fully controlled by PICAM SDK, eliminating any overhead that can occur when communicating through other development environments.
Family Specifications
|
Camera Type |
2D Area Scan |
|---|---|
|
Sensor Technology |
CMOS |
|
QE |
95%, Back Illuminated |
|
Read Noise |
1.5 e- (ms) |
|
Spectrum |
Mono, UV |
|
Operating System |
Windows 10 (64 bit), Linux |
|
Dynamic Range |
50,000 : 1 |
|
Spectrum |
Mono, UV |
|
Data Interface |
USB 3.0 |
Models
|
Model Number |
Resolution |
FPS |
Pixel Size (μm) |
Dark Current |
Read Noise |
|---|---|---|---|---|---|
|
1200 x 1200 |
82 fps |
11 µm |
0.7 e⁻/p/s |
1.3 e⁻ |
|
|
2048 x 2048 |
47 fps |
11 µm |
0.7 e⁻/p/s |
1.3 e⁻ |
Document
More Product Information
- Highest resolution – 12 bits all the time
- More capability – integrates multiple instruments into one
- Comprehensive probe support – supports over 30 probes in 9 categories
- MAUI with OneTouch user interface for intuitive and efficient operation
- Fully integrated smart vision system
- Mono and Color CCD sensor options
- Ultra small form factor 44 x 44 x 44 mm
- Industrial IP67 Housing
- Easy application setup via Laptop or PC
- M4 mounting holes on each surface
- Connects to standard vision lights
- Utilizes factory M12 style cordsets
- No software to install
High voltage differential probes provide high CMRR over a broad frequency range to simplify the measurement challenges found in noisy, high common-mode power electronics environments. The probe’s design is easy-to-use and enables safe, precise high voltage floating measurements.
Probe adapters provide simple and easy interface of third-party probes as well as change between the different Teledyne LeCroy Oscilloscope input and cable types (ProBus, ProLink, K/2.92 mm, BNC and SMA). Depending on the adapters, changing between the Teledyne LeCroy Oscilloscope's input type may have an effect on the overall performance of the channel.
Fully Integrated: With the ProBus™ interface, the AP033 becomes an integral part of the oscilloscope. The probe sensitivity and offset can be controlled from the oscilloscope front panel, the probe front panel, or by using remote control commands (GPIB or RS-232). Sensitivity, offset, input capacitance, and common mode voltage range are displayed on the oscilloscope screen. When used with a LeCroy digital oscilloscope, no external power supply is required.
- 100% Automatic Inspection
- Low cost of ownership allows you to distribute processing across the production line. More points of inspection = better failure analysis and faster, easier corrective actions.
- No Software to Install
- BOA Spot's embedded vision tools offer powerful, flexible inspection with a simple interface.
- Integrated lighting
- LED ring light with multiple available colors makes illumination easy.
- Flexible Mounting Options
- Thru- and surface-mounting options and a slim form factor let BOA Spot fit into tight spaces.
This CCD Family includes the R6, the ELECTRO, the LUMO and the MicroPublisher 6, a offering a range of CCDs designed for documentation, electrophysiology, long-exposure and color imaging respectively. These cameras are fast, sensitive CCDs designed for microscopy and scientific research.
Differential active probes are like two probes in one. Instead of measuring a test point in relation to a ground point (like single-ended active probes), differential probes measure the difference in voltage of a test point in relation to another test point
- Highest Reliability:
- Worry-free, permanent vacuum seal technology
- Highest Performance:
- Back-illuminated CCD with optional eXcelon® technology
- Highest Sensitivity:
- Highest average quantum efficiency (QE) from UV to NIR
- Easy Systems Integration:
- A variety of mounting configurations makes integration of cameras fast and easy.
- The software development toolkit makes software integration a breeze.
Teledyne DALSA
Teledyne DALSA is an international leader in high performance digital imaging and semiconductors with approximately 1000 employees world-wide. Established in 1980 and acquired by Teledyne Technologies in 2011, Teledyne DALSA designs, develops, manufactures, and markets digital imaging products and solutions, in addition to providing semiconductor products and services. Our core competencies are in specialized integrated circuit and electronics technology, software, and highly engineered semiconductor wafer processing.
Teledyne DALSA exists for the long term. Our goal is to build upon our 30 year heritage of developing the world's leading high performance digital imaging and semiconductor solutions and to accelerate our level of innovation. We focus on R&D development but also draw on the capabilities available to us as part of a larger organization. We seek to deliver products and technology that are truly innovative so that we can help our customers succeed.
Contact Details
Teledyne DALSA Headquarters
605 McMurray Road, Waterloo, Ontario, Canada N2V 2E9
Phone: 519-886-6000
Fax: 519-886-8023
Imaging/Machine Vision
Download Line Card
