Teledyne LeCroy - T3AWG6K Series – 2, 4 and 8 Channel Arbitrary Waveform Generator
- 2, 4 and 8 channel configurations
- 16-bit vertical resolution
- Sample Rate up to 12.32 GS/s with RF mode
- 16-bit vertical resolution.
- 4 Gpts waveform memory per channel
- Up to 5 Vpp Output Voltage and ±2.5 V Baseline Offset 50 Ohm
The T3AWG6K series consists of three high-performance arbitrary waveform generators with 2, 4 and 8 analog channels, 16-bit vertical resolution, sampling rate up to 12.32 GS/s with RF mode, waveform memory depth of 4 Gpts, with outstanding signal fidelity and easy generation of complex signals. In addition, up to 32 digital channels in sync with analog signals for advanced electronic testing.
Multifunctional Generator
Arbitrary Function Generator
- Improved Direct Digital Synthesis (DDS) technology
- 16 bits vertical resolution
- Built-in waveforms include sine, square, pulse, ramp, sin(x)/x noise, DC, gaussian, lorentz, exponential rise, exponential decay, haversine, double pulse, arbitrary (2 to 16KSample)
- Run mode includes continuous, sweep, burst and modulation (AM, FM, PM, FSK, PSK and PWM)
Arbitrary Waveform Generator
- Variable Clock True-Arbitrary Technology
- Variable clock up to 6.16 GS/s (12.32 GS/s in RF mode)
- Waveform length 4Gpts @ch
- Up to 16,384 waveform entries in the sequencer, repeat counter up to 4G or infinite, minimum waveform length 16 pts
- Run mode includes continuous, triggered, single/burst, stepped and advanced
Digital Pattern Generator
- Up to 32 digital channels synchronous with analog channels
- LVTTL digital output
- 16 x SMA (LVDS) outputs
Digital I/Q modulator (RF mode)
- 16 bits I/Q components
- Single carrier (2 I/Q comp) or double carrier (4 I/Q comp)
- Variable clock up to 12.32 GS/s
Key Specifications
|
Model |
T3AWG6062 |
T3AWG6064 |
T3AWG6068 |
|---|---|---|---|
|
Number of Analog Channels |
2 |
4 |
8 |
|
Vertical Resolution |
16 bits |
||
|
Output Voltage |
up to 5 Vpp and ± 2.5 V Baseline Hardware offset (50 Ohm into 50 Ohm) |
||
|
Sampling Rate |
up to 6.16 GS/s variable clock (12.32 GS/s in RF mode) for AWG and 6.16 GS/S fixed in AFG |
||
|
Waveform Memory |
4 Gpts per channe |
||
|
Digital Pattern Generator (DPG) |
up to 8 Digital Channels |
up to 16 Digital Channels |
up to 32 Digital Channels |
|
Waveforms Sequencing |
up to 16.384 waveforms, length granularity of 1 point (> 384 Pts.) |
||
More Product Information
-
Teledyne e2v Sapphire CMOS sensor
-
Switchable shutter modes
-
Power over Ethernet
-
60 fps at full resolution
-
Monochrome (G-192B) and color (G-192C) models
-
GigE Vision interface with Power over Ethernet
-
Screw mount RJ45 Ethernet connector for secure operation in industrial environments
-
Supports cable lengths up to 100 meters (CAT-6 recommended)
-
Comprehensive I/O functionality for simplified system integration
-
Popular C-Mount lens mount
-
Easy camera mounting via standard M3 threads on top and bottom of housing or optional tripod adapter
-
Easy software integration with Allied Vision's Vimba Suite and compatibility to the most popular third party image-processing libraries.
-
Defect pixel masking feature with the Defect Mask Loader tool that allows you to manage a user defined defective pixel list to match your application and optimize the life cycle of the camera.
-
Select between B 270 ASG protection glass and filter types: Jenofilt 217 IR cut filter, Hoya C-5000 IR cut filter, RG715 IR pass filter, or RG830 IR pass filter
- High speed up to 100 kHzx3 line rate (Mono) or 300 kHz line rate (Color)
- RGB native colors (Color)
- Independent exposure control (Color)
- Subpixel spatial correction (Color)
- Sequential exposure control (Mono)
- High dynamic range (Mono)
- Up to 100 m optical cable length
-
Monochrome (G-131B) and color (G-131C) models
-
GigE Vision interface with Power over Ethernet
-
Screw mount RJ45 Ethernet connector for secure operation in industrial environments
-
Supports cable lengths up to 100 meters (CAT-6 recommended)
-
Comprehensive I/O functionality for simplified system integration
-
Popular C-Mount lens mount
-
Easy camera mounting via standard M3 threads on top and bottom of housing or optional tripod adapter
-
Easy software integration with Allied Vision's Vimba Suite and compatibility to the most popular third party image-processing libraries.
-
Defect pixel masking feature with the Defect Mask Loader tool that allows you to manage a user defined defective pixel list to match your application and optimize the life cycle of the camera.
-
Select between B 270 ASG protection glass and filter types: Jenofilt 217 IR cut filter, Hoya C-5000 IR cut filter, RG715 IR pass filter, or RG830 IR pass filter
- Allows TekProbe interface level II probes to work with any ProBus-equipped Teledyne LeCroy oscilloscope
- Automatic probe detection
- Provides all necessary power and offset control to the attached probe
- Supports probes up to 4 GHz
- Easy firmware updates
- Wide variety of probes supported including: Preamplifiers, Current Probes, Single-Ended Active Probes and Differential Active Probes
- 100 MHz, 200 MHz, 350 MHz, 500 MHz and 1 GHz bandwidths
- Up to 4 GS/s sample rate
- Long Memory – up to 20 Mpts
- 10.1” capacitive touch screen display
- 16 Digital Channel MSO option
- MAUI - Most Advanced User Interface
- Designed for Touch
- Built for Simplicity
- Made to Solve
- Advanced Anomaly Detection
- Fast Waveform Update
- History Mode - Waveform Playback
- WaveScan - Search and Find
- Multi-Instrument Capabilities
- Protocol Analysis - Serial Trigger and Decode
- Waveform Generation - Built-in Function Generator
- Digital Voltmeter and Frequency Counter
- Future Proof
- Upgradeable Bandwidth
- Field Upgradable Software and Hardware Options
- Long cable lengths at maximum image acquisition rates
- Data forwarding rate for distributed image processing
- Fully supported by Sapera Vision Software SDKs
- Bandwidth models from 8 GHz to 30 GHz
- Low loading and high impedance for minimal signal disturbance
- Wide variety of tips:
- Standard and high-sensitivity 30 GHz solder-in tips
- High-temperature solder-in tip with 1-meter lead
- QuickLink adapter for mixed-signal probing
- Handheld browser tip
- Tips for direct oscilloscope connection to CrossSync PHY protocol analyzer interposers
- Built-in tip identification for simple setup and precise signal reproduction
- Ideal for debug and validation of:
- PCIe 1.0 to 6.0
- DDR3/LPDDR3
- DDR4/LPDDR4/LPDDR4X
- DDR5
- Other high-speed serial interfaces
- All Digital IF technology
- 10.1” WVGA (1024 x 600) Display
- Frequency range from 9 KHz up to 3.2 GHz
- -161 dBm/Hz Displayed Average Noise Level (Typ)
- -98 dBc/Hz @ 10 khz Offset Phase Noise (Typ)
- Total Amplitude Accuracy < 0.7 dB
- 1 Hz Minimum Resolution Bandwidth (RBW)
- Comes with Preamplifier
- Highest resolution – 12 bits all the time
- More capability – integrates multiple instruments into one
- Comprehensive probe support – supports over 30 probes in 9 categories
- MAUI with OneTouch user interface for intuitive and efficient operation
Teledyne LeCroy
Website
12bit MSO's 40 Mhz to 100 GHz, Probes, Series Network & Logic Analyzers
