Teledyne Dalsa - Falcon4-CLHS Extreme High-Speed Global Shutter CMOS Cameras
- Reduced dark noise levels and improved dark offset
- Improved sensitivity, including NIR response
- In-camera image pre-processing (lens shading correction, pixel correction)
- Large full well when using in-sensor binning >142Ke
- Thousands of frames per second in Partial Scan Mode (ROI)
- Multi-ROI support (up to 32 ROI) and Cycling Mode
- Advanced Sequencer functions of different features
For true high-performance imaging, turn to the Falcon4-CLHS camera series. Using Teledyne’s advanced CMOS architectures, Falcon4-CLHS cameras offer unique, unprecedented capabilities for large area, high-resolution, high-speed imaging. Models range from 11.2 megapixels to 86 megapixels, with frame rates up to 609 fps.
Take more images. A lot more images!
When high-speed and high-resolution imaging are top priorities, the new range of Falcon4-CLHS cameras deliver. Available in multiple resolutions ranging from 2.8 megapixels to 67 megapixels, the high-speed 2.8 MP model can capture images at up to 1200 fps, greatly increasing imaging system efficiency. While higher resolution models like 11 MP, 37 MP and 67 MP offer incredible resolution and throughput for a variety of challenging applications.
High frame rate applications
The Falcon4-CLHS M4480 / M4400’s large pixel width and very high frame rate offer a powerful solution to many imaging challenges:
- Machine Vision
- Robotics
- Factory Automation Inspection
- Motion Tracking and Analysis
- Electronic Inspection
- High Speed 3D imaging
How fast is 1200 frames per second?
The Falcon4-CLHS-M2240 is a unique offering in the 2D area scan market with a frame rate that can reach up to 600 fps. The speed of these models can be difficult to visualize. What does 600 frames per second mean?
- 2240 x 1248 pixels
- APS-C format lenses
- CLHS 4 or 7-Lanes - 10.3 Gb / sec. per Lane
- Over 24 times faster frame rate than typical 2KHD cameras
Get the big picture. The really big picture.
Teledyne DALSA’s Falcon4-CLHS range delivers ultra-high resolution and high-speed. With models like the M8200, delivering up to 90 fps, this camera offers unique, unprecedented capabilities for large area, high-resolution, high-speed imaging. Available in monochrome, this camera is also sensitive into the NIR spectrum.
High resolution applications
The Falcon4-CLHS M8200's incredible resolution and throughput serve a variety of challenging applications:
- Aerial Imaging
- Reconnaissance
- Security and Surveillance
- 3D Metrology
- Flat Panel Display Inspection
Family Specifications
|
Camera Type |
Area Scan |
|---|---|
|
Sensor Technology |
CMOS |
|
Supported Interfaces |
Camera Link HS |
|
Spectrum Capability |
Visible (400-700 nm), Near Infrared (700-1000 nm) |
|
Features |
T2IR |
Models
|
Model Number |
Resolution |
FPS |
Pixel Size (μm) |
Interface |
Spectrum |
|---|---|---|---|---|---|
|
2240 x 1248 |
1200 |
12 |
Camera Link HS |
Mono |
|
|
4480 x 2496 |
600 |
6 |
Camera Link HS |
Mono |
|
|
4480 x 2496 |
330 |
6 |
Camera Link HS |
Mono |
|
|
6144 x 6144 |
120 |
2.5 |
Camera Link HS |
Mono |
|
|
8192 x 8192 |
90 |
2.5 |
Camera Link HS |
Mono |
More Product Information
- 500 MHz - 4 GHz bandwidths
- Up to 40 GS/s sample rate
- 15.4” capacitive touch screen
- MAUI with OneTouch
- Powerful, Deep Toolbox
- Exceptional Serial Data Tools
- 16 digital channels with 1.25 GS/s
- Huge Applied Offset Range
- Optional Application Packages
- Image acquisition from Camera Link Base camera
- Supports Camera Link® operations up to 85MHz
- Supports 32/64-bit Windows platforms
- Quarter-length PCI Express x1 Board
- Power Over Camera Link® (PoCL) Compliant
- Offers external acquisition control signals on single PCIe x1 slotROHS compliant
Fully Integrated: With the ProBus™ interface, the AP033 becomes an integral part of the oscilloscope. The probe sensitivity and offset can be controlled from the oscilloscope front panel, the probe front panel, or by using remote control commands (GPIB or RS-232). Sensitivity, offset, input capacitance, and common mode voltage range are displayed on the oscilloscope screen. When used with a LeCroy digital oscilloscope, no external power supply is required.
- Industry’s latest CMOS image sensors
- Simplified set-up with field proven Sapera LT software featuring CamExpert
- Engineered to accommodate industrial environment with a ruggedized screw mount SDR connectors
- GenICan GenCP compliant
- 100 MHz, 200 MHz, 350 MHz, 500 MHz and 1 GHz bandwidths
- Up to 4 GS/s sample rate
- Long Memory – up to 20 Mpts
- 10.1” capacitive touch screen display
- 16 Digital Channel MSO option
- MAUI - Most Advanced User Interface
- Designed for Touch
- Built for Simplicity
- Made to Solve
- Advanced Anomaly Detection
- Fast Waveform Update
- History Mode - Waveform Playback
- WaveScan - Search and Find
- Multi-Instrument Capabilities
- Protocol Analysis - Serial Trigger and Decode
- Waveform Generation - Built-in Function Generator
- Digital Voltmeter and Frequency Counter
- Future Proof
- Upgradeable Bandwidth
- Field Upgradable Software and Hardware Options
- 5 GigE Ethernet port & hardware
- Supports cable lengths up to 100 m (CAT-5e, CAT-6) or (4T-6A)
- Simplified set-up with field proven Sapera LT software featuring CamExpert
- Engineered to accommodate industrial environment with a ruggedized screw mount RJ-45 connector
Transmission line probes are a special type of passive probe designed for use at very high frequencies. They replace the high impedance probe cable found in a traditional passive probe with a precision transmission line, with a characteristic impedance that matches the oscilloscope input (50 Ohm). This greatly reduces the input capacitance to a fraction of a picofarad, minimizing the loading of high frequency signals. A matching network at the tip increases the DC input resistance. While they have lower DC input resistance than a traditional passive probe (usually 500 Ohm) to 1kOhm), the input impedance of these probes remains nearly constant over their entire frequency range. A traditional /10 passive probe will have a 10 MOhm) input impedance at DC, however this impedance drops rapidly with frequency, passing below the input impedance of a transmission line probe at less than 100 MHz.
-
Monochrome (G-131B) and color (G-131C) models
-
GigE Vision interface with Power over Ethernet
-
Screw mount RJ45 Ethernet connector for secure operation in industrial environments
-
Supports cable lengths up to 100 meters (CAT-6 recommended)
-
Comprehensive I/O functionality for simplified system integration
-
Popular C-Mount lens mount
-
Easy camera mounting via standard M3 threads on top and bottom of housing or optional tripod adapter
-
Easy software integration with Allied Vision's Vimba Suite and compatibility to the most popular third party image-processing libraries.
-
Defect pixel masking feature with the Defect Mask Loader tool that allows you to manage a user defined defective pixel list to match your application and optimize the life cycle of the camera.
-
Select between B 270 ASG protection glass and filter types: Jenofilt 217 IR cut filter, Hoya C-5000 IR cut filter, RG715 IR pass filter, or RG830 IR pass filter
-
Highest resolution – 12 bits all the time
-
More channels, flexibility – 8 analog and 16 digital channels
-
Longest Memory – 5 Gpt records with simple navigation – no compromise
-
View 16 channels on one display with OscilloSYNC™
-
Powerful, deep toolbox enables and simplifies complex analysis
-
MAUI with OneTouch user interface for intuitive and efficient operation
Teledyne DALSA
Teledyne DALSA is an international leader in high performance digital imaging and semiconductors with approximately 1000 employees world-wide. Established in 1980 and acquired by Teledyne Technologies in 2011, Teledyne DALSA designs, develops, manufactures, and markets digital imaging products and solutions, in addition to providing semiconductor products and services. Our core competencies are in specialized integrated circuit and electronics technology, software, and highly engineered semiconductor wafer processing.
Teledyne DALSA exists for the long term. Our goal is to build upon our 30 year heritage of developing the world's leading high performance digital imaging and semiconductor solutions and to accelerate our level of innovation. We focus on R&D development but also draw on the capabilities available to us as part of a larger organization. We seek to deliver products and technology that are truly innovative so that we can help our customers succeed.
Contact Details
Teledyne DALSA Headquarters
605 McMurray Road, Waterloo, Ontario, Canada N2V 2E9
Phone: 519-886-6000
Fax: 519-886-8023
Imaging/Machine Vision
Download Line Card
Document
