AVT - Mako G-131 GigE Vision camera, Teledyne e2v Sapphire CMOS sensor, 62 fps

Overview
Specifications & Details
Datasheets & Downloads
Videos

Monochrome (G-131B) and color (G-131C) models
GigE Vision interface with Power over Ethernet
Screw mount RJ45 Ethernet connector for secure operation in industrial environments
Supports cable lengths up to 100 meters (CAT-6 recommended)
Comprehensive I/O functionality for simplified system integration
Popular C-Mount lens mount
Easy camera mounting via standard M3 threads on top and bottom of housing or optional tripod adapter
Easy software integration with Allied Vision's Vimba Suite and compatibility to the most popular third party image-processing libraries.
Defect pixel masking feature with the Defect Mask Loader tool that allows you to manage a user defined defective pixel list to match your application and optimize the life cycle of the camera.
Select between B 270 ASG protection glass and filter types: Jenofilt 217 IR cut filter, Hoya C-5000 IR cut filter, RG715 IR pass filter, or RG830 IR pass filter

Manufactured By: Allied Vision Technologies

Mako G-131 is a 1.3 megapixel GigE machine camera that incorporates the high quality Type 1/1.8 (8.7 mm diagonal) Teledyne e2v Sapphire EV76C560 CMOS sensor. At full resolution, this camera runs 62 frames per second. With a smaller region of interest, higher frame rates are possible.

Mako G cameras have the same ultra-compact form factor and the same mounting positions as many analog cameras. All models include Power over Ethernet, three opto-isolated outputs, and a 64 MB image buffer. The image quality profits from the precisely aligned sensor. By default monochrome models ship with no optical filter and color models ship a Type Hoya C-5000 IR cut filter.

See the Modular Concept for lens mount and optical filter options.
See the Customization and OEM Solutions webpage for additional options.

Specifications

Interface

IEEE 802.3 1000BASE-T, IEEE 802.3af (PoE)

Resolution

1280 (H) × 1024 (V)

Sensor

Teledyne e2v EV76C560

Sensor type

CMOS

Sensor size

Type 1/1.8

Pixel size

5.3 µm × 5.3 µm

Shutter mode

Global, Global reset, and Rolling shutter

Lens mounts (available)

C-Mount, CS-Mount, S-Mount

Max. frame rate at full resolution

62 fps

ADC

10 Bit

Image buffer (RAM)

64 MByte

Imaging performance

Imaging performance data is based on the evaluation methods in the EMVA 1288 Release 3.1 standard for characterization of image sensors and cameras. Measurements are typical values for monochrome models measured at full resolution without optical filter. Contact Sales or AE for more information.

Quantum efficiency at 529 nm

58 %

Temporal dark noise

25.7 eˉ

Saturation capacity

9800 eˉ

Dynamic range

51.4 dB

Absolute sensitivity threshold

26.4 eˉ

Output

Bit depth

8/10 Bit

Monochrome pixel formats

Mono8, Mono10

Raw pixel formats

BayerBG8, BayerBG10

Operation conditions/dimensions

Operating temperature

+5 °C to +45 °C housing temperature

Power requirements (DC)

12 to 24 VDC AUX or 802.3at Type 1 PoE

Power consumption

2.0 W at 12 VDC; 2.2 W PoE

Mass

80 g (with C-Mount)

Body dimensions (L × W × H in mm)

60.5 × 29.2 × 29.2 (including connectors)

Regulations

CE: 2014/30/EU (EMC), 2011/65/EU, including amendment 2015/863/EU (RoHS); FCC Class B; CAN ICES-003

Features

Image optimization features:

Auto gain (manual gain control: 0 to 24 dB, 1 dB increments)
Auto exposure (exposure time control varies by pixel format)
Auto white balance (G-131C only)
Binning (1x1 and 2x2 binning)
Color correction, hue, saturation (G-131C only)
Decimation
Defect pixel masking (user defined with Defect Mask Loader tool)
Gamma correction
One look-up table
Region of interest, separate region for auto features
Reverse X/Y

Camera control features:

Event channel
Image chunk data
Storable user sets
StreamBytesPerSecond (bandwidth control)
Stream hold
Sync out modes: Trigger ready, input, exposing, readout, imaging, strobe, GPO
Switchable Rolling, Global, Global Reset shutter modes
Temperature monitoring (main board only)

Applications

Mako G-131 is ideal for a wide range of applications including:

Robotics
Quality control
Inspection, surveillance
Industrial imaging
Machine vision
Logistics

Quantum efficiency

Mako G Data Sheet G-131

Allied Vision Camera Line-Up V5.3.2

Mako G QuickStart Guide V1.0.0

Mako G Technical Manual V4.4.5

GigE Features Reference V5.5.0

Camera and Driver Attributes

Modular Concept External V11.7.0 | 2020-Apr-01

Technical papers, knowledge base

3D CAD files (STEP)

Please right-click the link of a 3D camera model and select save as to download the file. After downloading, unzip the STEP file. You need a 3D CAD viewer application to view and measure the STEP files. Download a STEP viewer free of charge: https://www.freecadweb.org/

Software and firmware

Vimba is our current future-proof SDK.

Other SDKs and tools are available on our Software downloads webpage.

GigE camera firmware is available on our Firmware webpage.

View YouTube Channel

Allied Vision Technologies

https://www.alliedvision.com/en/

For more than 30 years, Allied Vision has been helping people to reach their imaging goals. Allied Vision supplies camera technology and image capture solutions for industrial inspection, medical and scientific imaging, traffic monitoring and many more application areas in digital imaging.

With a deep understanding of customers’ needs, Allied Vision finds individual solutions for every application, a practice which has made Allied Vision one of the leading camera manufacturers worldwide in the machine vision market.

The company has nine locations in Germany, Canada, the United States, Singapore and China and is represented by a network of sales partners in over 30 countries.