AVT - Prosilica GT 1910 2.1 Megapixel CCD camera for extreme environments, fast frame rates
Image optimization features:
-
Auto gain (manual gain control: 0 to 32 dB)
-
Auto exposure (manual exposure control: 10 µs to 26.8 s)
-
Auto white balance (GT1910C only)
-
Binning (horizontal and vertical)
-
Color correction, hue, saturation (GT1910C only)
-
Column defect masking
-
Decimation X/Y
-
Gamma correction
-
Three look-up tables (LUTs)
-
Region of interest (ROI), separate ROI for auto features
-
Reverse X/Y
Camera control features:
-
P-Iris and DC-Iris lens control
-
Event channel
-
Image chunk data
-
IEEE 1588 Precision Time Protocol (PTP)
-
RS232
-
Storable user sets
-
StreamBytesPerSecond (bandwidth control)
-
Stream hold
-
Sync out modes: Trigger ready, input, exposing, readout, imaging, strobe, GPO
-
Tap mode switchable in Vimba Viewer 2.0 or later (four-tap, one-tap)
-
Temperature monitoring (main board and sensor board)
-
Trigger over Ethernet (ToE) Action Commands
Prosilica GT1910 is a 2.1 Megapixel camera with a GigE Vision compliant Gigabit Ethernet interface. Prosilica GT1910 is offered in both monochrome and color models. This camera incorporates the high quality ON Semiconductor KAI-02150 TRUESENSE CCD sensor providing excellent image quality in High Definition resolution (1080p). At full resolution, this camera runs 57.5 frames per second. With a smaller region of interest, higher frame rates are possible. It is a rugged camera designed to operate in extreme environments and fluctuating lighting conditions. It offers Precise iris lens control allowing users to fix the aperture size to optimize depth of field, exposure and gain without the need for additional control elements. By default monochrome models ship with no optical filter and color models ship with an IRC30 IR cut filter.
Options:
- Various IR cut/pass filters and lens mounts
- Various sensor options
See the Modular Concept for lens mount and optical filters options.
See the Customization and OEM Solutions page for additional options.
Interface
IEEE 802.3 1000BASE-T, IEEE 802.3af (PoE)
Resolution
1920 (H) × 1080 (V)
Sensor
ON Semi KAI-02150
Sensor type
CCD Progressive
Sensor size
Type 2/3
Pixel size
5.5 µm x 5.5 µm
Lens mount (default)
C-Mount
Max. frame rate at full resolution
57.5 fps
ADC
14 Bit
Image buffer (RAM)
128 MByte
Output
Bit depth
14 (monochrome); 12 (color) Bit
Monochrome pixel formats
Mono8, Mono12, Mono12Packed, Mono14
YUV color pixel formats
YUV411Packed, YUV422Packed, YUV444Packed
RGB color pixel formats
RGB8Packed, BGR8Packed, RGBA8Packed, BGRA8Packed
Raw pixel formats
BayerGR8, BayerGR12, BayerRG12Packed
General purpose inputs/outputs (GPIOs)
TTL I/Os
1 input, 2 outputs
Opto-isolated I/Os
1 input, 2 outputs
RS232
1
Operating conditions/dimensions
Operating temperature
-20 °C to +60 °C ambient (without condensation)
Power requirements (DC)
7 to 25 VDC; PoE
Power consumption
5.1 W @ 12VDC; 6.3 W PoE
Mass
224 g
Body dimensions (L × W × H in mm)
92 × 53.3 × 33 (including connectors)
Regulations
CE: 2014/30/EU (EMC), 2011/65/EU (RoHS); FCC Class A; CAN ICES-003 Issue 4/5
Quantum efficiency
Application
Application
Application
Application
Application
Application
Application
Technical papers, knowledge base
3D CAD files (STEP)
Please right-click the link of a 3D camera model and select save as to download the file. After downloading, unzip the STEP file. You need a 3D CAD viewer application to view and measure the STEP files. Download a STEP viewer free of charge: http://www.ida-step.net/
- Prosilica GT1290, C-Mount
- Prosilica GT1290C, C-Mount
- Prosilica GT1380, C-Mount
- Prosilica GT1380C, C-Mount
- Prosilica GT1600, C-Mount
- Prosilica GT1600C, C-Mount
- Prosilica GT1660, C-Mount
- Prosilica GT1660C, C-Mount
- Prosilica GT1910, C-Mount
- Prosilica GT1910C, C-Mount
- Prosilica GT1920, C-Mount
- Prosilica GT1920C, C-Mount
- Prosilica GT1930LC, EF-Mount Planarity Adjustable
- Prosilica GT2000, C-Mount
- Prosilica GT2000C, C-Mount
- Prosilica GT2050, C-Mount
- Prosilica GT2050C, C-Mount
- Prosilica GT2300, C-Mount
- Prosilica GT2300C, C-Mount
- Prosilica GT2450, C-Mount
- Prosilica GT2450C, C-Mount
- Prosilica GT2750, C-Mount
- Prosilica GT2750C, C-Mount
- Prosilica GT3300C, C-Mount
- Prosilica GT3300C, F-Mount
- Prosilica GT3300, C-Mount
- Prosilica GT3300, F-Mount
- Prosilica GT3400, C-Mount
- Prosilica GT3400C, C-Mount
- Prosilica GT6600C, Birger EF-Mount (Legacy)
- Prosilica GT1930C, C-Mount
- Prosilica GT1930, C-Mount
- Prosilica GT4090, GT4096, GT5120, EF-Mount Planarity Adjustable
- Prosilica GT4090, GT4096, GT5120, F-Mount Planarity Adjustable
- Prosilica GT4090, GT4096, GT5120, F-Mount
- Prosilica GT4090, GT4096, GT5120, M42-Mount Planarity Adjustable
- Prosilica GT4090, GT4096, GT5120, M42-Mount
- Prosilica GT4090, GT4096, GT5120, M58-Mount Planarity Adjustable
- Prosilica GT4090, GT4096, GT5120, M58-Mount
- Prosilica GT4905C, EF-Mount, Planarity Adjustable
- Prosilica GT4905C, F-Mount
- Prosilica GT4905C, F-Mount, Planarity Adjustable
- Prosilica GT4905C, M42-Mount
- Prosilica GT4905C, M42-Mount, Planarity Adjustable
- Prosilica GT4905C, M58-Mount
- Prosilica GT4905C, M58-Mount, Planarity Adjustable
- Prosilica GT4905, EF-Mount, Planarity Adjustable
- Prosilica GT4905, F-Mount
- Prosilica GT4905, F-Mount, Planarity Adjustable
- Prosilica GT4905, M42-Mount
- Prosilica GT4905, M42-Mount, Planarity Adjustable
- Prosilica GT4905, M58-Mount
- Prosilica GT4905, M58-Mount, Planarity Adjustable
- Prosilica GT4907C, EF-Mount, Planarity Adjustable
- Prosilica GT4907C, F-Mount
- Prosilica GT4907C, F-Mount, Planarity Adjustable
- Prosilica GT4907C, M42-Mount
- Prosilica GT4907C, M42-Mount, Planarity Adjustable
- Prosilica GT4907C, M58-Mount
- Prosilica GT4907C, M58-Mount, Planarity Adjustable
- Prosilica GT4907, EF-Mount, Planarity Adjustable
- Prosilica GT4907, F-Mount
- Prosilica GT4907, F-Mount, Planarity Adjustable
- Prosilica GT4907, M42-Mount
- Prosilica GT4907, M42-Mount, Planarity Adjustable
- Prosilica GT4907, M58-Mount
- Prosilica GT4907, M58-Mount, Planarity Adjustable
- Prosilica GT6600C, EF-Mount, Planarity Adjustable
- Prosilica GT6600C, F-Mount
- Prosilica GT6600C, F-Mount, Planarity Adjustable
- Prosilica GT6600C, M42-Mount
- Prosilica GT6600C, M42-Mount, Planarity Adjustable
- Prosilica GT6600C, M58-Mount
- Prosilica GT6600C, M58-Mount, Planarity Adjustable
- Prosilica GT6600, EF-Mount, Planarity Adjustable
- Prosilica GT6600, F-Mount
- Prosilica GT6600, F-Mount, Planarity Adjustable
- Prosilica GT6600, M42-Mount
- Prosilica GT6600, M42-Mount, Planarity Adjustable
- Prosilica GT6600, M58-Mount
- Prosilica GT6600, M58-Mount, Planarity Adjustable
Software and firmware
Vimba is our current future-proof SDK.
Other SDKs and tools are available on our Software downloads webpage.
GigE camera firmware is available on our Firmware webpage.
More Product Information
-
High SNR mode (up to 24 dB better signal-to-noise ratio)
-
Low-noise binning mode
-
Shading correction
-
Defect pixel correction
-
Area of interest (AOI), separate AOI for auto features
-
Binning
-
Decimation
-
Auto gain (manual gain control: 0 to 24.4 dB)
-
Auto exposure (31 µs to 67 s)
-
Auto white balance
-
Look-up table (LUT)
-
Hue, saturation
-
Color correction
-
Local color anti-aliasing
-
Reverse X/Y
-
Deferred image transport
-
Trigger programmable, level, single, bulk, programmable delay
-
Sequence mode (changes the camera settings on the fly)
-
SIS (secure image signature, time stamp for trigger, frame count etc.)
-
Storable user sets
Scope of delivery
-
Camera and IEEE 1394b cable (other configurations on request)
-
IMX250 CMOS sensor
-
ALVIUM image processing
-
USB3 Vision
-
Various hardware options
-
Monochrome (1800 U-508m) and color (1800 U-508c) models
-
ALVIUM® Technology for on-board image processing
-
USB3 Vision interface for GenICam SFNC features
-
Platform concept that enables the operation of different Alvium camera models with a common software
-
Micro-B USB 3.1 Gen 1 connector with screw locks for industrial applications
-
Precise sensor-to-lens mount alignment
-
Standard M3 mounting holes for top and bottom mounting, standard M2 mounting holes for front mounting
-
Industrial performance for both embedded and machine vision applications
-
Monochrome (G-131B) and color (G-131C) models
-
GigE Vision interface with Power over Ethernet
-
Screw mount RJ45 Ethernet connector for secure operation in industrial environments
-
Supports cable lengths up to 100 meters (CAT-6 recommended)
-
Comprehensive I/O functionality for simplified system integration
-
Popular C-Mount lens mount
-
Easy camera mounting via standard M3 threads on top and bottom of housing or optional tripod adapter
-
Easy software integration with Allied Vision's Vimba Suite and compatibility to the most popular third party image-processing libraries.
-
Defect pixel masking feature with the Defect Mask Loader tool that allows you to manage a user defined defective pixel list to match your application and optimize the life cycle of the camera.
-
Select between B 270 ASG protection glass and filter types: Jenofilt 217 IR cut filter, Hoya C-5000 IR cut filter, RG715 IR pass filter, or RG830 IR pass filter
-
Versatile temperature range for extreme environments
-
IEEE 1588 PTP
-
Power ovet Ethernet
-
P-Iris and DC-Iris lens control
-
Monochrome (GT1930) and color (GT1930C) models
-
GigE Vision interface with Power over Ethernet
-
Screw mount RJ45 Ethernet connector for secure operation in industrial environments
-
Supports cable lengths up to 100 meters (CAT-6 recommended)
-
Trigger over Ethernet Action Commands allow for a single cable solution to reduce system costs
-
Comprehensive I/O functionality for simplified system integration
-
Popular C-Mount lens mount
-
Easy camera mounting via standard M3 threads or optional tripod adapter
-
Easy software integration with Allied Vision's Vimba SDK and compatibility to the most popular third party image-processing libraries.
-
Fast Camera Link InGaAs SWIR camera
-
VGA resolution
-
Compact industrial design, no fan
-
Simple camera configuration via GenCP
-
Compact industrial design
-
Up to 301 fps at full resolution
-
Camera Link interface with GenCP support
-
Comprehensive I/O control options
-
Automated on-board image correction
-
Stabilized sensor cooling, no fan
-
Extended operating temperature range
-
High SNR mode (up to 24 dB better signal-to-noise ratio)
-
Low-noise binning mode
-
Shading correction
-
Defect pixel correction
-
Area of interest (AOI), separate AOI for auto features
-
Binning
-
Decimation
-
Auto gain (manual gain control: 0 to 24.4 dB)
-
Auto exposure (49 µs to 67 s)
-
Auto white balance
-
Look-up table (LUT)
-
Hue, saturation
-
Color correction
-
Local color anti-aliasing
-
Reverse X/Y
-
Deferred image transport
-
Trigger programmable, level, single, bulk, programmable delay
-
Sequence mode (changes the camera settings on the fly)
-
SIS (secure image signature, time stamp for trigger, frame count etc.)
-
Storable user sets
Scope of delivery
-
Camera and IEEE 1394b cable (other configurations on request)
-
Fast GigE Vision InGaAs SWIR camera
-
VGA resolution
-
TECless
-
Power over Ethernet
-
Compact industrial design, no fan
-
Up to 301 fps at full resolution
-
GigE Vision interface with Power over Ethernet
-
Comprehensive I/O control options
-
Automated image correction
-
Monochrome (G-419B) and color (G-419C) models
-
GigE Vision interface with Power over Ethernet
-
Screw mount RJ45 Ethernet connector for secure operation in industrial environments
-
Supports cable lengths up to 100 meters (CAT-6 recommended)
-
Comprehensive I/O functionality for simplified system integration
-
IEEE 1588 Precision Time Protocol allows for easy synchronization of multiple cameras and devices on network
-
Trigger over Ethernet Action Commands allow for a single cable solution to reduce system cost
-
Popular C-Mount lens mount
-
Easy camera mounting via standard M3 threads on top and bottom of housing or optional tripod adapter
-
Easy software integration with Allied Vision's Vimba Suite and compatibility to the most popular third party image-processing libraries.
-
Defect pixel masking feature with the Defect Mask Loader tool that allows you to manage a user defined defective pixel list to match your application and optimize the life cycle of the camera.
-
Select between B 270 ASG protection glass and filter types: Jenofilt 217 IR cut filter, Hoya C-5000 IR cut filter, RG715 IR pass filter, or RG830 IR pass filter
-
IMX273 CMOS sensor
-
ALVIUM image processing
-
MIPI CSI-2 interface
-
Various hardware options
-
Monochrome (1800 C-158m) and color (1800 C-158c) models
-
ALVIUM® Technology for on-board image processing
-
MIPI CSI-2 interface with up to 4 lanes
-
Platform concept that enables the operation of different Alvium camera models with a common software
-
Hirose HR FHH55 FPC connector with minimum space requirements for a compact design
-
Precise sensor-to-lens mount alignment
-
Standard M3 mounting holes for top and bottom mounting, standard M2 mounting holes for front mounting
-
Industrial performance for embedded vision applications
-
Easy-to-install driver and code examples
Allied Vision Technologies
For more than 30 years, Allied Vision has been helping people to reach their imaging goals. Allied Vision supplies camera technology and image capture solutions for industrial inspection, medical and scientific imaging, traffic monitoring and many more application areas in digital imaging.
With a deep understanding of customers’ needs, Allied Vision finds individual solutions for every application, a practice which has made Allied Vision one of the leading camera manufacturers worldwide in the machine vision market.
The company has nine locations in Germany, Canada, the United States, Singapore and China and is represented by a network of sales partners in over 30 countries.
Contact Details
Allied Vision
102 Pickering Way - Suite 502 Exton, PA 19341, USA
Phone: +1-877-USA-1394
Fax: +1 978-225-2030
Imaging/Machine Vision
Download Line Card
Document
