Teledyne DALSA - SOPHIA-XO EUV and Soft X-Ray Cameras
- Back-illuminated CCD sensors with >95% QE (over ~5 eV to 30 keV range)
- 2k x 2k and 4k x 4k formats; 13.5 and 15 micron pixels
- High frame rates with up to 4-port readout
- Cooling down to -90ºC using liquid or air
SOPHIA-XO offers high-sensitivity (>95% QE) and high-speed for the widest range of VUV and x-ray detection, with thermoelectric cooling up to -90°C and high frame rates. With a rotatable, industry-standard CF flange and high-vacuum seal design the software-selectable gains and readout speeds make this camera well suited for UHV applications.
X-ray Energy Sensitivity
The SOPHIA XO provides high sensitivity, covering the 5 eV to 30 keV range, with a peak quantum efficiency of >95%, encompassing a wide variety of applications
Ultra-Flexible Performance
Flexible multiple-readout-port design allows the SOPHIA XO to capture even ultrafast events, offering 4-port, 2-port or 1-port readout options, custom sensor readout or kinetic readout each with 4.2 fps at 16 MHZ.
The SOPHIA XO comes with complete triggering support, independently optimized clocking for each combination alongside a field-replaceable internal mechanical shutter.
Latest UHV Technology
Using an all-metal, hermetically sealed vacuum design the SOPHIA XO prevents outgassing or long-term degradation caused by epoxies. Six or eight inch CF flange vacuum interface available.
ArcTec™ cooling technology
Taking advantage of an all-metal hermetically sealed vacuum design, the ArcTec™ cooling technology prevents outgassing or long-term degradion. A custom heat sign design is utilized to ensure efficient thermal dissipation from the sensor and electronics.
The ArcTec™ available are air cooling only, liquid cooling only (for vibration-sensitive environments), or a combination.
Powered by LightField Software
Powerful and intuitive software with built-in math engine allows for the complete control of cameras and spectrographs, with real-time image analysis and spectral data.
LightField software provides seamless integration of hardware controls and direct data acquisition into programmes such as National Instruments’ LabVIEW® and MathWorks’ MATLAB®. This software also fully supports IntelliCal automated wavelength and intensity calibration.
The SOPHIA-XO can also be fully controlled by PICAM SDK, eliminating any overhead that can occur when communicating through other development environments.
Family Specifications
|
Camera Type |
Back-illuminated |
|---|---|
|
Sensor Technology |
10-8 Torr |
|
Supported Interfaces |
USB 3.0 |
Models
|
Model Number |
MP |
FPS |
Pixel Size (μm) |
Sensor |
QE % |
DR |
|---|---|---|---|---|---|---|
|
2048 x 2048 |
13.5 x 13.5 μm |
Back-illuminated CCD |
0.95 |
16-bit digitization |
||
|
2048 x 2048 |
15.0 x 15.0 μm |
Back-illuminated CCD |
0.95 |
16-bit digitization |
||
|
2048 x 2048 |
13.5 x 13.5 μm |
Back-illuminated CCD |
0.95 |
16-bit digitization |
||
|
4096 x 4096 |
15.0 x 15.0 μm |
Back-illuminated CCD |
0.95 |
18-bit digitization |
||
|
4096 x 4096 |
15.0 x 15.0 μm |
Back-illuminated CCD |
0.95 |
18-bit digitization |
More Product Information
The PI-MAX 4 improves time-resolved imaging and spectroscopy with either intensified CCD (ICCD) or intensified EMCCD (emICCD) systems. With a wide range of applications, such as plasma diagnostics, combustion and quantum computing, there is no other ICCD that can match the performance and flexibility of the PI-MAX 4.
- Highest Reliability:
- Worry-free, permanent vacuum seal technology
- Highest Performance:
- Back-illuminated CCD with optional eXcelon® technology
- Highest Sensitivity:
- Highest average quantum efficiency (QE) from UV to NIR
- Easy Systems Integration:
- A variety of mounting configurations makes integration of cameras fast and easy.
- The software development toolkit makes software integration a breeze.
- S-parameters DC to 40 GHz, single-ended and mixed-mode
- Impedance Profile with <1 mm resolution, differential and common-mode
- Internal, automatic OSLT calibration
- USB-connected, small, lightweight
- Flexible display of the measurements
- Remove effects from fixtures, connectors and cables
- Emulate eye diagrams with CTLE, DFE and FFE equalization
- Advanced jitter analysis
- All Digital IF technology
- 10.1” WVGA (1024 x 600) Display
- Frequency range from 9 KHz up to 3.2 GHz
- -161 dBm/Hz Displayed Average Noise Level (Typ)
- -98 dBc/Hz @ 10 khz Offset Phase Noise (Typ)
- Total Amplitude Accuracy < 0.7 dB
- 1 Hz Minimum Resolution Bandwidth (RBW)
- Comes with Preamplifier
The Blackfly® S leverages the industry’s most advanced sensors in an ice-cube form factor. It is packed with powerful features enabling you to easily produce the exact images you need and accelerate your application development. This includes both automatic and precise manual control over image capture and on-camera pre-processing. The Blackfly S is available in GigE, USB3, cased, and board-level versions.
The Blackfly S currently has a lead time of four weeks or less. Get the cameras you need – when you need them.
- True Differential TDR with <3mm Spatial Resolution
- Small Form Factor and Battery Powered
- S Parameters up to 15 GHz
- 35 ps Rise Time
- Up to 50,000 points long memory
- Emerging Serial Data Standards Testing
- 500 MHz - 4 GHz bandwidths
- Up to 40 GS/s sample rate
- 15.4” capacitive touch screen
- MAUI with OneTouch
- Powerful, Deep Toolbox
- Exceptional Serial Data Tools
- 16 digital channels with 1.25 GS/s
- Huge Applied Offset Range
- Optional Application Packages
With the ProBus interface, the ZD500, 1000, and 1500 becomes an integral part of the oscilloscope. All probe gain and offset controls are transparent to the user, making it easier to probe the circuit without concern for which gain setting to choose. When used with a LeCroy digital oscilloscope, no external power supply is required.
- ~120-1100 nm sensitivity
- -90℃ deep cooling
- Support for CCDs of varying sizes
- Flexible readout design
Teledyne DALSA
Teledyne DALSA is an international leader in high performance digital imaging and semiconductors with approximately 1000 employees world-wide. Established in 1980 and acquired by Teledyne Technologies in 2011, Teledyne DALSA designs, develops, manufactures, and markets digital imaging products and solutions, in addition to providing semiconductor products and services. Our core competencies are in specialized integrated circuit and electronics technology, software, and highly engineered semiconductor wafer processing.
Teledyne DALSA exists for the long term. Our goal is to build upon our 30 year heritage of developing the world's leading high performance digital imaging and semiconductor solutions and to accelerate our level of innovation. We focus on R&D development but also draw on the capabilities available to us as part of a larger organization. We seek to deliver products and technology that are truly innovative so that we can help our customers succeed.
Contact Details
Teledyne DALSA Headquarters
605 McMurray Road, Waterloo, Ontario, Canada N2V 2E9
Phone: 519-886-6000
Fax: 519-886-8023
Imaging/Machine Vision
Download Line Card
