Teledyne DALSA - PIXIS High-Performance, Low-Noise CCD Cameras
- ~120-1100 nm sensitivity
- -90℃ deep cooling
- Support for CCDs of varying sizes
- Flexible readout design
PIXIS cameras are fully integrated, low-noise cameras with deep cooling for quantitative scientific imaging and spectroscopy from UV-NIR. High-quantum efficiency and ultra-low-noise electronics make PIXIS cameras ideal for demanding low-light applications.
Broad Range Sensitivity
The PIXIS offers the broadest wavelength coverage, from ~120 – 1100 nm, for the widest variety of applications.
With >95% quantum efficiency (QE) with selected CCDS, high QE in UV with UV enhanced CCD and enhanced sensitivity and reduced etaloning with eXcelon™ technology.
Unique Vacuum Technology
The PIXIS offers deep cooling to -90℃ with air or liquid, providing ultra-low dark current for long exposure times.
The single input window delivers maximum sensitivity with maintenance-free operation.
Enhanced Sensitivity With eXcelon™
eXcelon™ technology enhances the sensitivity of the PIXIS, delivering higher quantum efficiency and reduced etaloning.
Ultimate Flexibility
Dual-amplifier readout design allows for optimization of system performance. The high sensitivity amplifier reduces read noise for weak signals, and the high capacity amplifier offering increased effective dynamic range.
Powered by LightField Software
Powerful and intuitive software with built-in math engine allows for the complete control of cameras and spectrographs, with real-time image analysis and spectral data.
LightField software provides seamless integration of hardware controls and direct data acquisition into programmes such as National Instruments’ LabVIEW® and MathWorks’ MATLAB®. This software also fully supports IntelliCal automated wavelength and intensity calibration.
The PIXIS can also be fully controlled by PICAM SDK, eliminating any overhead that can occur when communicating through other development environments.
Models
|
Model Number |
FOV |
Pixel Size (μm) |
QE |
Read Noise |
Dark Current |
FWC |
Sensor |
|---|---|---|---|---|---|---|---|
|
PIXIS 400 PIX-400 |
1340 x 400 |
20 µm |
99% |
3 e⁻ |
0.001 e⁻/p/s @ -75 °C |
1000 ke⁻ |
Teledyne e2v CCD |
|
PIXIS 100 PIX-100 |
26.8 x 2.0 mm |
20 µm |
99% |
3 e⁻ |
0.001 e⁻/p/s @ -80°C |
1000 ke⁻ |
Teledyne e2v CCD |
|
PIXIS 2K PIX-2K |
27.6 x 6.9 mm |
13.5 µm |
97% |
3.5 e⁻ |
0.001 e⁻/p/s @ -75 °C |
750 ke⁻ |
Teledyne e2v CCD |
|
PIXIS 256B PIX-256 |
26.0 x 6.7 mm |
26 µm |
95% |
6 e⁻ |
0.3 e⁻/p/s @ -75 °C |
500 ke⁻ |
Teledyne e2v CCD |
|
PIXIS 2048 PIX-2048 |
27.6 x 27.6 mm |
13.5 µm |
98% |
3.5 e⁻ |
0.002 e⁻/p/s @ -60 °C |
1000 ke⁻ |
Teledyne e2v CCD42-40 |
|
PIXIS 1024 PIX-1024 |
13.3 x 13.3 mm |
13 µm |
99% |
3 e⁻ |
0.0004 e⁻/p/s @ -70 °C |
250 ke⁻ |
Teledyne e2v CCD47-10 |
More Product Information
- Four operating modes: – CC, CV, CR, CP
- Static, Dynamic and Sequence mode support
- Built in Application Functions - Short Circuit Test, Battery Test Mode, CR-LED Mode, OCP and OPP Test
- Provides a load of up to 300 Watts
- Programmable and analog external control
- Fully integrated smart vision system
- Mono and Color CCD sensor options
- Ultra small form factor 44 x 44 x 44 mm
- Industrial IP67 Housing
- Easy application setup via Laptop or PC
- M4 mounting holes on each surface
- Connects to standard vision lights
- Utilizes factory M12 style cordsets
- No software to install
- 100 MHz, 200 MHz, 350 MHz, 500 MHz and 1 GHz bandwidths
- Up to 4 GS/s sample rate
- Long Memory – up to 20 Mpts
- 10.1” capacitive touch screen display
- 16 Digital Channel MSO option
- MAUI - Most Advanced User Interface
- Designed for Touch
- Built for Simplicity
- Made to Solve
- Advanced Anomaly Detection
- Fast Waveform Update
- History Mode - Waveform Playback
- WaveScan - Search and Find
- Multi-Instrument Capabilities
- Protocol Analysis - Serial Trigger and Decode
- Waveform Generation - Built-in Function Generator
- Digital Voltmeter and Frequency Counter
- Future Proof
- Upgradeable Bandwidth
- Field Upgradable Software and Hardware Options
- Long exposure CMOS, capable of exposures up to an hour
- Ultra-low dark current due to advanced thermal control
- High-resolution 20 MP sensor
- Ultra-small 2.4 μm pixels
- 22 fps
- Extended dynamic range to capture intense signals
- 83% quantum efficiency
- Provides a passive PCIe® backplane for test applications
- Self-contained, portable and self-powered
- Supplies power for +3.3V, +3.3Vaux and +12V rails
- Generates PCIe reference clock
- Accepts external clock inputs
- Generates valid PERST# bus reset that can be activated by manual push button
- Includes two mid-bus probe footprints for traffic monitoring
- Supports two PCIe x16 sockets which accept cards of any link width (x1, x4, x8, x16)
- Provides indication of valid connection of PRSNT1# and PRSNT2# lines for each card
- Supports data rates of 2.5 GT/s and 5.0 GT/s
Probe adapters provide simple and easy interface of third-party probes as well as change between the different Teledyne LeCroy Oscilloscope input and cable types (ProBus, ProLink, K/2.92 mm, BNC and SMA). Depending on the adapters, changing between the Teledyne LeCroy Oscilloscope's input type may have an effect on the overall performance of the channel.
Linea SWIR features a cutting-edge InGaAs sensor in a compact package that is suitable for a wide variety of applications. With exceptional responsivity and low noise, this camera allows customers to see their products like never before. Linea SWIR is available as a 1k resolution camera with highly responsive 12.5 µm pixels, or a 512 resolution camera with larger 25 µm pixels.
The PyLoN®-IR is a controllerless, cryogenically-cooled InGaAs array designed for quantitative, scientific spectroscopy applications demanding the highest possible sensitivity. PyLoN-IR is the ideal camera for high-performance, near-infrared and SWIR spectroscopy.
- 2,048 pixels CMOS monochrome line scan sensor
- Pixel size available in 2 versions: 10 μm x 20 μm and 10 μm x 200 μm
- Pixel full well capacity available in two versions: 140 ke- and 200 ke-
- CameraLink (base, medium, full) or USB3 interface
- Line rate available in 4 versions: up to 20 kl/s, 80 kl/s, 130 kl/s and 250 kl/s
- Bit depth: 10, 11 and 12 bits • Configurable region of interest
- Sensor package available in two versions: ceramic and organic
- Power supply: 10 to 15V DC. PoCL compliant
- Low power consumption: <3W
Teledyne DALSA
Teledyne DALSA is an international leader in high performance digital imaging and semiconductors with approximately 1000 employees world-wide. Established in 1980 and acquired by Teledyne Technologies in 2011, Teledyne DALSA designs, develops, manufactures, and markets digital imaging products and solutions, in addition to providing semiconductor products and services. Our core competencies are in specialized integrated circuit and electronics technology, software, and highly engineered semiconductor wafer processing.
Teledyne DALSA exists for the long term. Our goal is to build upon our 30 year heritage of developing the world's leading high performance digital imaging and semiconductor solutions and to accelerate our level of innovation. We focus on R&D development but also draw on the capabilities available to us as part of a larger organization. We seek to deliver products and technology that are truly innovative so that we can help our customers succeed.
Contact Details
Teledyne DALSA Headquarters
605 McMurray Road, Waterloo, Ontario, Canada N2V 2E9
Phone: 519-886-6000
Fax: 519-886-8023
Imaging/Machine Vision
Download Line Card
