• High speed 60 kHz x3 (Color) or 120 kHz (Mono), and high resolution 28 μm or 900 dpi 
• No missing or interpolated pixels 
• Exposure control 
• RGB colors (Color) or Mono/HDR mode
• Precalibrated pixel size for metrology applications 
• Camera Link HS fibre interface

• Up to 65 GHz 
• Up to 80 Channels @ 36 GHz 
• Up to 160 GS/s 
• Up to 512 Mpts/Ch 
• 50 fs rms Sample Clock (Intrinsic) Jitter 
• Jitter Between All Channels of <130 fs rms

Capture, Process, Control at the Edge

• Resolutions 1.2 to 12 megapixels 
• Quad-core processor 
• Broad range of onboard I/O 
• Compact, rugged, IP67 enclosure 
• Run AI inspection models on-camera 
• No-code machine vision development

• 100 MHz, 200 MHz, 350 MHz, 500 MHz and 1 GHz bandwidths 
• Up to 4 GS/s sample rate 
• Long Memory – up to 20 Mpts 
• 10.1” capacitive touch screen display 
• 16 Digital Channel MSO option 
• MAUI - Most Advanced User Interface 
  • Designed for Touch 
  • Built for Simplicity 
  • Made to Solve 
• Advanced Anomaly Detection 
  • Fast Waveform Update 
  • History Mode - Waveform Playback 
  • WaveScan - Search and Find 
• Multi-Instrument Capabilities 
  • Protocol Analysis - Serial Trigger and Decode 
  • Waveform Generation - Built-in Function Generator 
  • Digital Voltmeter and Frequency Counter 
• Future Proof 
  • Upgradeable Bandwidth 
  • Field Upgradable Software and Hardware Options

Transmission line probes are a special type of passive probe designed for use at very high frequencies. They replace the high impedance probe cable found in a traditional passive probe with a precision transmission line, with a characteristic impedance that matches the oscilloscope input (50 Ohm). This greatly reduces the input capacitance to a fraction of a picofarad, minimizing the loading of high frequency signals. A matching network at the tip increases the DC input resistance. While they have lower DC input resistance than a traditional passive probe (usually 500 Ohm) to 1kOhm), the input impedance of these probes remains nearly constant over their entire frequency range. A traditional /10 passive probe will have a 10 MOhm) input impedance at DC, however this impedance drops rapidly with frequency, passing below the input impedance of a transmission line probe at less than 100 MHz.

The Blackfly® S leverages the industry’s most advanced sensors in an ice-cube form factor. It is packed with powerful features enabling you to easily produce the exact images you need and accelerate your application development. This includes both automatic and precise manual control over image capture and on-camera pre-processing. The Blackfly S is available in GigE, USB3, cased, and board-level versions.

The Blackfly S currently has a lead time of four weeks or less. Get the cameras you need – when you need them.

• Industry’s latest CMOS image sensors 
• Simplified set-up with field proven Sapera LT software featuring CamExpert 
• Engineered to accommodate industrial environment with a ruggedized screw mount SDR connectors 
• GenICan GenCP compliant

• High Speed 10GigE Interface - 10 Gbit/s transfer speed supports 4K60 (12-bit). Long cable lengths supporting CAT6A and CAT5e cables. 
• Reliability & Simplicity - Large 10GBASE-T install base supports a favorable consumer and industrial ecosystems (Full GigE Vision compatibility). 
• Flexibility for Integrators - IEEE1588 Clock Synchronization for precise timing across multiple devices - learn more. Color Correction Matrix, Gamma, Saturation and Sharpness reduce host-side processing requirements.