• Uses standard PC Ethernet port & hardware 
• Supports cable lengths up to 100 m (CAT-5e or CAT-6) 
• Simplified set-up with field proven Sapera LT software featuring CamExpert 
• Engineered to accommodate industrial environment with a ruggedized screw mount RJ-45 connector

• Uses standard PC Ethernet port & hardware 
• Supports cable lengths up to 100 m (CAT-5e or CAT-6) 
• Simplified set-up with field proven Sapera LT software featuring CamExpert 
• Engineered to accommodate industrial environment with a ruggedized screw mount RJ-45 connector

• 500 MHz - 4 GHz bandwidths 
• Up to 40 GS/s sample rate 
• 15.4” capacitive touch screen 
• MAUI with OneTouch 
• Powerful, Deep Toolbox 
• Exceptional Serial Data Tools 
• 16 digital channels with 1.25 GS/s 
• Huge Applied Offset Range 
• Optional Application Packages

With the ProBus interface, the ZD500, 1000, and 1500 becomes an integral part of the oscilloscope. All probe gain and offset controls are transparent to the user, making it easier to probe the circuit without concern for which gain setting to choose. When used with a LeCroy digital oscilloscope, no external power supply is required.

Differential active probes are like two probes in one. Instead of measuring a test point in relation to a ground point (like single-ended active probes), differential probes measure the difference in voltage of a test point in relation to another test point

• DigRF v4 Decodes 
  • Low-speed (26 Mb/s) 
  • Medium-speed (1248 Mb/s) 
  • High-speed (1456 Mb/s) 
• DigRF v3 Decodes 
  • Low-speed (6.5 Mb/s) 
  • Medium-speed (26 Mb/s) 
  • High-speed (312 Mb/s) 
• Convert DigRF 3G and v4 I and Q digital data to corresponding analog waveforms 
• Correlate analog waveforms with protocol decode on one screen 
• View decoded data in hexadecimal format 
• Decode information expands as the time base is adjusted or zoomed 
• Convenient table display with quick “Zoom to byte” capability 
• Quick search capability for specific message packets

• 2, 4 and 8 channel configurations 
• 16-bit vertical resolution 
• Sample Rate up to 12,32 GS/s with RF mode 
• 16-bit vertical resolution. 
• 4 GSample waveform memory per channel 
• Up to 5 Vpp Output Voltage and ±2.5 V Baseline Offset (into 50?)

• Vector Network Analyzer Frequency Range from 10 MHz up to 3.2 GHz 
• Spectrum Analyzer Frequency Range from 9 kHz up to 3.2 GHz 
• -156 dBm/Hz Displayed Average Noise Level (Typ.) 
• -98 dBc/Hz @10 kHz Offset Phase Noise (1 GHz, Typ.) 
• Total Amplitude Accuracy < 1.2 dB 
• 1 Hz Minimum Resolution Bandwidth (RBW) 
• All-Digital IF Technology 
• Standard Preamplifier 
• Distance to fault capability using VNA time domain analysis 
• Up to 1.5 GHz Tracking Generator Kit 
• Built-in Advanced Measurement capability (CHP, ACPR, OBW, CNR, TOI, etc) 
• 10.1 lnch WVGA (1024 x 600) Display

• 150 MHz, 2 analog channels 
• 8 synchronized digital channels (T3AWG2152-D only) 
• 16-bit vertical resolution 
• 128 MPts @Ch waveform memory 
• Max sampling rate of 600 MS/s