IntelliPower - FA00245 Power Distribution Unit
TYPE | SPECIFICATION |
---|---|
Power Rating | 225W |
Chassis Configuration | 3U, ≤23"D |
Input Voltage | 115 VAC |
Input Frequency | 50/60 |
Input Connector | Circular Mil |
Output Voltage | 110 VAC |
Output Frequency | 50/60 |
Output Connector | Circular Mil |
More Product Information
-
Combination AC and DC Power Source
-
2Hz-7,990Hz Output Frequencies
-
Arbitrary and Harmonic Waveform Generation
-
Built-In Digital Power Analyzer
-
Scope Capture Capability
-
Power Programming Software
-
Constant Power Mode
-
Multi-Box Option
-
1500VA, 1400W High Temperature Double Conversion On Line IPS with 120VAC, 60Hz Input, 120VAC and Thee DC Outputs, Input Power Factor Correction for Highly Rugged Military
- Single system power up to 650 kW
- Parallel system power up to 1.3 MW
- Bidirectional output voltage up to 1,000 V
- Bidirectional output current up to ±1,000 A, up to ±2,000A in parallel
- Available in 1, 2 or 4 channel configurations
- Multiple channel units share internal DC Bus up to 2MW without drawing additional power from the AC Grid
- Regenerative to 96%
- Large 15-inch color touch panel
- Short circuit proof
- Designed for safety to EN ISO 13849-1
- Dedicated Battery Testing/Simulation Modes
- Seamless transition between source and sink
- High reliability, long life components
-
Flexible Product Line
-
Low power DC modules
-
Low power AC modules
-
High power DC, 19" rack mounted loads
-
High power AC, 19" rack mounted loads
-
26 Total Models
-
-
Flexible Control
-
Remote: GPIB, RS-232, Analog
-
Manual: Front Panel
-
DC Modes: CC, CR, CV, CP
-
AC Modes: CR, CC with crest factor control
-
Dynamic mode with slew rate control
-
-
Flexible Data Feedback
-
GPIB, RS-232
-
Current monitor output (SLM DC only)
-
Front panel
-
-
Advanced MicroVac chuck surface for minimum contact resistance between wafer and chuck
-
Safety-rated interlock system for high-power testing (meets EN 60947-5-1, EN 60204-1)
-
Supports fully automated testing up to 10kV by eliminating arcing point
-
Full wafer access via locking roll-out stage
-
On-wafer power device characterization up to 10,000 V DC / 600 A
-
Coaxial, triaxial, and pin jack feed-troughs available
-
Convenient instrument connection kits
-
Load/unload wafer to hot/cold chuck (-60° C to +300° C)
-
Up to 15% faster transition times than other systems in the market
-
True wire-speed impairment @ 100Gbps (plus 50 / 40 /25 & 10Gbps)
-
Ease of use – Chimera is a stand-alone impairment tool that integrates seamlessly with Xena’s Valkyrie traffic generator, letting you speed up your work flow by using the same SW to both generate and impair Ethernet traffic.
-
Highest port density in the industry – plus you can reserve individual port-pairs without blocking access to the others
-
Setting up custom impairment distributions is a breeze
-
Chimera supports a broad range of impairments (latency/jitter, packet & port impairments, flexible distributions, BW shaping etc)
-
Powerful, easy-to-use automation & scripting options
-
2250KVA, 1.9KW Double Conversion, On-Line, Isolated 440V 3-Ph, 60Hz Input UPS with 440V 3-Ph, 60Hz Output UPS
-
AC Input UPS with internal batteries, extreme high temperature rugged rack mount double conversion on line UPS 72VDC in and 120VAC out at 60Hz with for Industrial Applications in a 2U enclosure
-
1500VA, 1000W, 120Vac 50/60Hz Isolated Input, 115Vac 50/60Hz Output UPS with Freq Follower, 5BHS, 3U20.5, Aluminum, Auto Start, Input Cir Mil, SNMP, 6 x Twist-Lock NEMA
IntelliPower, Inc.
IntelliPower, Inc., located in Orange, California, has been designing, manufacturing and supporting high-performance, cost effective Uninterruptible Power Systems (UPS) and frequency/voltage conversion solutions to protect mission-critical applications since 1988. IntelliPower’s on-line, double conversion UPS, power conditioner and frequency/voltage converter solutions utilize digitally controlled, high-efficiency power switching technology that has been proven for over 32 years on numerous platforms.
Customers with demanding environments use IntelliPower’s rugged products because of our proven record of providing outstanding solutions. IntelliPower’s in-house development proprietary circuit design, DSP firmware/software technology and wide range of enclosure designs, give IntelliPower unmatched capabilities to deliver systems configured to customer requirements backed by expert support.
Our ability to design and configure quickly is based on our standard proprietary subassemblies that go into variations of our power systems as required. Our product configurator tools and application engineers allow you to easily define your requirements and obtain your proposal for solutions that exactly meet your needs.
Contact Details
IntelliPower, Incorporated
1746 North Saint Thomas Circle, Orange, California 92865, USA
Phone: 714-921-1580
Fax: 714-921-4023
Email: ca-ora-sales@ametek.com
Contact form