Dualos - LCF Open Line Plugs
All plugs ship with Skydrol (BMS3-11) Compatible O-Rings, Viton® Cuff and Four Metal Clamps. Parts in compliance with all SMOT document requirements.
|
Part Number |
Tube OD |
Tube ID |
Wall Thickness |
Tail Stamp |
|
NEO 406F-A-06 |
0.375 |
0.311 |
0.032 |
N6 |
|
NEO 407F-A-06 |
0.375 |
0.337 |
0.019 |
W6 |
| NEO 410F-A-08 |
0.500 |
0.414 |
0.043 |
N8 |
|
NEO 411F-A-08 |
0.500 |
0.456 |
0.022 |
W8 |
| NEO 412F-A-10 |
0.625 |
0.517 |
0.054 |
N10 |
|
NEO 413F-A-10 |
0.625 |
0.579 |
0.023 |
W10 |
|
NEO 416F-A-12 |
0.750 |
0.620 |
0.065 |
N12 |
|
NEO 417F-A-12 |
0.750 |
0.696 |
0.027 |
W12 |
|
NEO 420F-A-04E |
0.457 |
0.251 |
– |
NE-04 |
|
NEO 421F-A-08E |
0.772 |
0.503 |
– |
NE-08 |
|
NEO 422F-A-10E |
0.929 |
0.629 |
– |
NE-10 |
|
NEO 423F-A-12E |
1.110 |
0.755 |
– |
NE-12 |
*Approximate Dimensions [inches]
Document
More Product Information
Focus recommends TRL Calibration Kits for applications such as load pull & noise parameters. Due to high reflection and low loss, tuner S-parameter measurements represent a challenge for VNA’s, because of error term determination and coupler directivity. Long experience has taught us not to rely on other calibration techniques than TRL (Thru-Reflect-Line). The popular SOLT technique is conditionally useable, but not guaranteed, up to 4GHz. The much convenient ECal method has provided questionable and inconsistent results. Our Customers are advised to be very careful with VNA calibrations, because the whole measured data depends on that.
Because of this, and to save our customers time and doubt, Focus has developed and offers a set of precise and reliable TRL calibration kits from 0.03 to 110 GHz with the following connector types: 7/16, N, APC-7, 3.5mm, 2.9mm, 2.4mm, 1.85mm, WR-15, WR-10. Our calibration kits are compatible with all commercial network analyzers.
For more information on TRL Calibration Kits, please read the following paper on TRL Versus SOLT
All caps ship with Skydrol (BMS3-11) Compatible O-ring Seal. Parts in compliance with all SMOT document requirements.
Focus offers a complete range of manual tuners. The MMT series use the same RF technology and precision as a comparable automatic tuner.
They are available in octave and multi-octave bands between 400 MHz and 18 GHz and provide high VSWR at DUT reference plane with a high reliability.
For harmonic tuning requirements, the MMT series can be enhanced, referring to as option –H2 and –H23, using a similar concept as Focus’ harmonic rejection tuners (PHT).
For more information on Automated Tuners, Click here!
All caps ship with Skydrol (BMS3-11) Compatible O-ring Seal. Parts in compliance with all SMOT document requirements.
Dualos
Dualos supplies the avionic industry with most reliable, precision manufactured hydraulic interface components in the market.
With the quality and assurance that’s expected, Dualos partners with major avionics manufacturers to solve complex engineering and test challenges. A lack of commercially available hydraulic test adapters was the problem. This opportunity laid the foundation in forming Dualos’ Hydraulic Interface Components division a decade ago.
Dualos designs, manufactures and provides logistical support for an entire family of Hydraulic Interface Components.
Contact Details
Dualos
1520 Steele Ave., Sumner, WA, 98390
Phone: 253-750-5125
Fax: 253-212-3539
Email: sales@dualos.com
Test & Measurement
Download Line Card
Document
