EMI Measurements:

• FFT-based dual-channel receiver
• According to CISPR16-1-1
• Peak, Quasi-Peak, and Average Detectors
• Resolution Bandwidth Filters of 200 Hz, 9 kHz, and 120 kHz (CISPR), and 1 kHz and 10 kHz (MIL)
• The fastest receiver in the market: Line and Neutral measurements with the 3 detectors simultaneously (6 simultaneous measurements)

The VTI Instruments 16-Channel bridge and strain gauge measurement instrument

• 24-bit, delta-sigma ADC, simultaneous sampling
• Programmable Sample Rate up to 128kSPS
• Full, Half & Quarter Bridge with 120Ω, 350Ω & 1kΩ bridge completion
• Voltage Excitation: 0.5V to 10V
• Current Excitation: 0.46mA
• 2-Wire & 4-Wire Ohms/RTD
• Bridge Zero Balancing
• Built-In-Self-Test (BIST)
• Strain Lead Wire Calibration
• Shunt Calibration: 50kΩ, 100kΩ & External provided by User
• TEDS Support
• LXI Ethernet Interface
• IEEE-1588 Synchronization
• Power over Ethernet (PoE) or 10–50 V DC input
• Built-in Parallel Data Streaming
• Full-featured Embedded Web Interface
• Compact 1U Half-rack Form Factor

• On-Off power switch
• 20 A Circuit Breaker
• Inlet - NEMA L6-20
• Outlets – NEMA L6-20R

• 3ft.
• (2) fork terminals (current)
• (1) fork terminals (ground)
• (2) Shielded Banana (voltage)

NEO 3XX Adapters

• Tri-Band S/X/KA: The best ratio of miniaturization/performance in any configuration
• AutoTrack S-Band: Supports any kind of operation
• Simultaneous Dual-Pol: For S, X and Ka-Band
• Earth Observation/Satellite Constellations: Meet your requirements
• Radome Covered: Maximum sustainability for any environment

NEO X01 3000 PSI Adapters

NEO X05 5080 PSI Adapters

The VTI Instruments 16-Channel isolated high voltage measurement instrument

• 24-bit SAR ADC per Channel
• 128k samples/second/channel sample rate
• 1000V channel-channel isolation
• 500V channel-ground isolation
• Input voltage ranges peak: ±420V/±10V/±1V
• Data logger acquisition mode
• 3-Pin screw terminal input connector
• LXI ethernet interface
• IEEE-1588 synchronization
• Power over Ethernet (PoE+) or 12– 50 V DC input
• Simultaneous data streaming
• 8-bit bank isolated digital I/O
• Full-featured embedded web interface
• Compact 1U half-rack form factor

• Up to 96 differential channels per full rack mainframe 
• Constantly monitor input signals for fault conditions 
• Flexible configurations for detecting edges, out-of-bounds conditions and measuring pulse widths 
• Inputs can be masked, inverted, and combined to produce interrupts 
• Can be used as a time stamp module and as a digital I/O 
• Programmable debounce circuitry prevents erroneous readings 
• 10 V and 100 V input ranges 
• On-board memory stores events with IEEE 1588 timestamps 
• Synchronize reading of input states with other scanned analog channels