NEO X01 3000 PSI Adapters

NEO 901 3000 PSI Adapters

NEO 3XX Adapters

• Up to 96 differential channels per full rack mainframe
• Constantly monitor input signals for fault conditions
• Flexible configurations for detecting edges, out-of-bounds conditions and measuring pulse widths
• Inputs can be masked, inverted, and combined to produce interrupts
• Can be used as a time stamp module and as a digital I/O
• Programmable debounce circuitry prevents erroneous readings
• 10 V and 100 V input ranges
• On-board memory stores events with IEEE 1588 timestamps
• Synchronize reading of input states with other scanned analog channels

• On-Off power switch
• 20 A Circuit Breaker
• Inlet - NEMA L6-20
• Outlets – NEMA L6-20R

• 3ft.
• (2) fork terminals (current)
• (1) fork terminals (ground)
• (2) Shielded Banana (voltage)

NEO X01 3000 PSI Adapters

• Measuring device for large extrusion tools up to 35 mm (1.37“) hole diameter 
• Automated measurement process 
• Focus indicator allows you to easily adjust the focus 
• Homogeneous transmitted light illumination - made by iiM GmbH - for the ideal presentation of the area to measured 
• The influence of the user is reduced to a minimum 
• Robust, ergonomic design 
• Ideal addition to the 2-camera system VCPEx+

NEO X05 5080 PSI Adapters

• 600 MHz of instantaneous bandwidth per channel
• Timing synchronization up to 16 channels
• Link Emulation including:
  • Phase continuous delay, Doppler, and attenuation changes
  • AWGN and Eb/No
  • 12 tap (path) multipath fading with Rayleigh, Rician & CW. Angle of Arrival (AOA), k-factor, and correlation controls
  • RF frequency agile up/down converters
• Payload Emulation including:
  • IMUX/OMUX amplitude and group delay distortion
  • Amplifier Compression (AM/AM and AM/PM)
  • Phase Noise
• Static and dynamic link emulation
• Ephemeris data generation using SATGEN
• Remote instrument control through ACEClient application