• Simplify cabling between cameras and vision computer through PoE support 
• Facilitate multi-camera configurations with two or four Gigabit Ethernet ports 
• Trigger multiple cameras simultaneously and reliably using hardware-assisted trigger-over-Ethernet (ToE) 
• Synchronize to automation devices in real-time through digital I/Os with hardware-assisted management 
• Deploy pre-licensed for GigE Vision support in Aurora software, formerly Matrox Imaging Software 
• Avoid the need for a separate hardware key through a license fingerprint for additional Aurora software features 
• Certified for use with GigE Vision systems

All caps ship with Skydrol (BMS3-11) Compatible O-ring Seal. Parts in compliance with all SMOT document requirements.

• 24-bit, delta-sigma ADC, simultaneous sampling 
• Programmable Sample Rate up to 128kSPS 
• Full, Half & Quarter Bridge with 120Ω, 350Ω & 1kΩ bridge completion 
• Voltage Excitation: 0.5V to 10V 
• Current Excitation: 0.46mA 
• 2-Wire & 4-Wire Ohms/RTD 
• Bridge Zero Balancing 
• Built-In-Self-Test (BIST) 
• Strain Lead Wire Calibration 
• Shunt Calibration: 50kΩ, 100kΩ & External provided by User 
• TEDS Support 
• LXI Ethernet Interface 
• IEEE-1588 Synchronization 
• Power over Ethernet (PoE) or 10–50 V DC input 
• Built-in Parallel Data Streaming 
• Full-featured Embedded Web Interface 
• Compact 1U Half-rack Form Factor

NEO X01 3000 PSI Adapters

NEO 905 5080 PSI Adapters

• Single or dual-channel display
• Agilent HP 437 & Agilent HP 438, and Boonton 4220A & 4230A emulation
• Automatically loads sensor data
• Simple software control via SCPI language
• IEEE-488 and RS-232 interfaces standard

The 4240 series of CW RF power meters provides the high speed measurement capability needed in a production environment, as well as the simplicity of operation required for bench top use. It provides very accurate measurements from -70 dBm to +44 dBm (sensor dependent) and has a rapid display update rate for tuning applications. The easy to read LCD displays both channels simultaneously with numeric and bar graph information.

All plugs ship with Skydrol (BMS3-11) Compatible O-Rings, Viton® Cuff and Four Metal Clamps. Parts in compliance with all SMOT document requirements.

NEO 20X Adapters

• Device and operation are according to the standard IEC 60811-506 (IEC 60811-1-4) point 8.5
• Case set offers all required weights for the test
• Easy operation
• Very robust and solid construction
• Steel impact piece included
• Up to 3 Samples can be tested simultaneously
• Device suitable for positioning in a cold chamber - Product No.: 402.0020.02