VisioCablePro - Hot Set Test & Heat Pressure Test
- 2 in 1: device contains the Hot Set Test as well as the Heat Pressure Test
- Robust and compact set including the device and an equipment case
- Possibility to attach a thermometer directly near the sample
- Measurement according to the cable standards IEC 60811 -507 (Hot Set Test) and IEC 60811 -508 (Heat Pressure Test) regarding sample attachment and weight attachment
- Precise choice of weights due to practical containers
- Simultaneous measurement of up to 3 cable or tube samples
Optional - Hot Set Test complete
- Sample rack for heat pressure and heat elongation test - Product No.: 401.0009.03
- Laser gauge - Product No.: 405.0009.01
- Thermal heat oven UN55 - Product No.: 405.0009.02
- Size (WxLxH): 585 x 514 x 784 mm (23 x 20.2 x 30.9“)
- Weight: 57 kg (125.6 lbs)
- Volume: 53 l
- Air exchange rate: 8-20x
- Thermal heat oven UN110 - Product No.: 405.0009.06
- Size (WxLxH): 745 x 584 x 864 mm (29 x 23 x 34“)
- Weight: 74 kg (163 lbs)
- Volume: 108 l
- Air exchange rate: 8 - 20x
|
Technical Details |
|
|---|---|
|
Size (W x L x H) |
Device: 200 x 170 x 315 mm 7.87 x 6.69 x 12.4 Inch Equipment: 375 x 290 x 70 mm 14.76 x 11.41 x 2.75 Inch Laser: 210 x 230 x 540 mm 8.26 x 5.11 x 21.26 Inch |
|
Weight |
Device: 2.3 kg | 5.1 lbs Equipment: 3.0 kg | 6.6 lbs Laser: 6.4 kg | 14.1 lbs |
|
Material |
Aluminium, Stainless steel, PVC case |
|
Standard reference |
IEC 60811 -507, -508 |
More Product Information
- Guaranteed performance to 43.5 GHz with Extended K™ ports
- High output power allows measurement of high attenuation devices
- Advanced time domain option provides tools for signal integrity analysis
- Wide dynamic range enables measurement of very low reflection artifacts
- Excellent corrected directivity minimizes measurement uncertainty
- SmartCal™ auto calibration unit reduces calibration and setup time
- Time domain with time gating option grants easier and faster fault identification
- Modern LAN interface for remote control is faster than GPIB
- A common GUI and SCPI interface within the ShockLine family
- Bias tee option simplifies test setups where the DUT needs DC biasing
- Universal Fixture Extraction (UFX) software option provides advanced de-embedding tools for test fixture extraction
- E-Band VNA
- Extended frequency range covering E-band and major parts of V band
- Fully assembled test system eliminates setup errors and increases reliability
- Tethered modules connect directly to the DUT increasing measurement stability
- Device and operation according to the standard IEC 60811-504
- The complete set consists of various winding spindles and cable guides for various diameters: Winding spindles: 10, 12, 14.5, 18, 22, 27, 33.5, 41, 50 mm | 0.4, 0.5, 0.57, 0.7, 0.86, 1.06, 1.32, 1.61, 1.96 Inch outer diameter; Cable guides: 3.2, 4, 5, 6.2, 7.7, 9.6, 12, 15 mm | 0.12, 0.15, 0.19, 0.24, 0.30, 0.38, 0.5, 0.59 Inch inner diameter
- The winding spindles and cable guides interlock easily and are easily fastened
- Maneuver Ratio: 5/1: 5x Crank rotation = 1x spindle rotation
- Spindle/Guide diameter ratio: 0.8x sample diameter
- Device suitable for positioning in a cold chamber - Product No.: 402.0020.04
- The Direct PC bus access data acquisition system provides the required sampling rate and resolution to meet IEC 61000-4-7 measurement requirements and supports high-speed data transfers.
- PC-based Harmonic and Flicker test software provides real-time full-color data display updates and continuous PASS/FAIL monitoring.
- Automatic calculation of the maximum permissible system impedance Zsys, using the Zref and measured Flicker parameters, as required per EN/IEC 61000-3-11.
- Intuitive operating software provides IEC test setup, data analysis, display, with test reports in and MS Word format.
- High resolution, no gap acquisition data storage to ensure that all data can be streamed to disk (in ASCII format if needed) for later review and replay of the actual test.
- Single Step and Fast playback mode of test results.
Image optimization features:
-
Auto gain (manual gain control: 0 to 22 dB)
-
Auto exposure (manual exposure control: 100 µs to 1 s, 1 µs increments)
-
Binning (horizontal and vertical) (sum)
-
Decimation X/Y
-
Enhanced Defect Pixel Correction (DPC)
-
Fixed Pattern Noise Correction (FPNC)
-
Gamma correction
-
Three look-up tables (LUTs)
-
Region of interest (ROI)
Camera control features:
-
EF lens control (order option -18)
-
Event channel
-
Image chunk data
-
IEEE 1588 Precision Time Protocol (PTP)
-
RS232
-
Storable user sets
-
StreamBytesPerSecond (bandwidth control)
-
Stream hold
-
Sync out modes: Trigger ready, input, exposing, readout, imaging, strobe, GPO
-
Temperature monitoring (main board and sensor board)
-
Trigger over Ethernet (ToE) Action Commands
The SPARTE 300 series antenna is a battle-tested product that has consistently delivered top-tier performance for mission-critical applications where reliable telemetry reception is paramount. This rugged antenna guarantees our customers the utmost precision, a long operational life, and straightforward maintenance.
The SPARTE 300 series opens up a world of possibilities for users, ranging from aircraft tracking and high-speed target monitoring to duplex datalinks with both receiving and transmitting capabilities.
Furthermore, the extensive and customizable input/output options empower users to operate multiple antennas in a coordinated, multi-site tracking setup. With all antennas, regardless of size, being effortlessly monitored, managed and controlled by using our TM Maestro software.
Image optimization features:
-
Auto gain (manual gain control: 0 to 32 dB)
-
Auto exposure (manual exposure control: 35 µs to 26.8 s)
-
Auto white balance (GT4907C only)
-
Binning (horizontal and vertical)
-
Color correction, hue, saturation (GT4907C only)
-
Column defect masking
-
Decimation X/Y
-
Gamma correction
-
Three look-up tables (LUTs)
-
Region of interest (ROI), separate ROI for auto features
-
Reverse X/Y
Camera control features:
-
EF lens control (order option -18)
-
Event channel
-
Image chunk data
-
IEEE 1588 Precision Time Protocol (PTP)
-
RS232
-
Storable user sets
-
StreamBytesPerSecond (bandwidth control)
-
Stream hold
-
Sync out modes: Trigger ready, input, exposing, readout, imaging, strobe, GPO
-
Tap mode switchable in Vimba Viewer 2.0 or later (four-tap, one-tap)
-
Temperature monitoring (main board and sensor board)
-
Trigger over Ethernet (ToE) Action Commands
- Vacuum pump to pick up small cable samples
- Suitable for the cable measuring device VCPLab and the cable o ring cutter ORC Micro
SlimVue Microscope
- Combined eye-pieces and CCD camera mount
- 3x zoom and quick lens exchange
- Quick lens exchange
- 1 um optical resolution
- Minimized scope footprint
- Fast change from navigation optics to high-resolution optics
- Resolving ‹ 50 μm pads
- Simple integration with any mmW modules
Application Specific Sigma Kits
- Engraved guides on mmW platen
- Supports broadband, load pull, coax RF and banded waveguide configuration
- Optical feedback on platen position (gauge)
- Adaptable to any mmW/sub-THz applications
- Seamless integration with any mmW modules and tuners
- Fast mounting and setup change
THz measurement capability
- Rock-solid mechanical design
- Submicron stage accuracy
- Optical feedback on platen and probe position (gauge)
- Motorized positioner
- <+-1 um separation repeatability
- Micrometer-accurate and repeatable probe placement and overtravel
- Highly-precise and stable THz measurements
- Specified performance to 43.5 GHz with Extended K™ ports
- Simple signal integrity testing of passive multiport and differential devices
- Advanced time domain option provides tools for signal integrity analysis
- Wide dynamic range enables measurement of very low reflection artifacts
- Excellent corrected directivity minimizes measurement uncertainty
- SmartCal™ auto calibration unit reduces calibration and setup time
- Time domain with time gating option enables TDR-like measurements
- Modern LAN interface for remote control is faster than GPIB
- A common GUI and SCPI interface within the ShockLine family
- The compact 3U high chassis allows for the efficient use of rack space
- Bias tee option simplifies test setups where the DUT needs DC biasing
- Universal Fixture Extraction (UFX) software option provides advanced de-embedding tools for test fixture extraction
VisioCablePro
VisioCablePro® is a brand of iiM GmbH - by Exaktera.
VisioCablePro® - Cable measurement engineering has especially been developed to carry out geometrical measurements, which specifically fulfill cable producers requirements to measure the geometrical features of insulating skins and cable sheaths.
Contact Details
iiM GmbH - VisioCablePro
Neuer Friedberg 5, 98527 Suhl, Germany
Phone: +49 3681 / 455 19-0
Email: info@iimag.de
