The Conformity Assessment Business - Antennas Magnetic
See "Specifications & Details" tab for more information.
|
Coil Set 4-39_9k-150k EN 61000-4-39 & RS101 9kHz - 150kHz, Tx & Rx Set |
|---|
Low-Frequency Transmit Coil (CAB4-3912) |
|
Frequency: 9 kHz to 150 kHz |
|
Main Diameter: 120 mm |
|
Maximum Current: 15 A |
|
Number of turns: 20 |
Low-Frequency Sense Coil (CABLSLF) |
|
Frequency: 9 kHz to 150 kHz |
|
Diameter to center of the coil: 40 mm |
|
Number of turns: 51 |
|
Wire type: 7/41 LITZ |
|
Winding Type: Electrostatically shielded |
|
Coil Set 4-39_150k-26M EN 61000-4-39, 150 kHz - 26 MHz, Tx & Rx Set |
|---|
High-Frequency Transmit Coil (CAB4-3910) |
|
Frequency: 150 kHz to 26 MHz |
|
Main Diameter: 100 mm |
|
Number of Turns: 3 |
|
Wire Diameter: 1mm |
|
Connection type: ‘N’ type Coaxial |
High-Frequency Sense Coil (CABLSHF) |
|
Frequency: 150 kHz to 26 MHz |
|
Diameter to center of the coil: 41 mm |
|
Number of turns: 1 |
|
Wire type: 1mm single core |
|
Winding Type: Electrostatically shielded |
|
Coupling Network for 134kHz |
|
It matches 50 Ohm amplifier |
|
Use with CAB4-3912 loop antenna |
|
Can work with other similar antennas |
|
Type N f-n connectors attached directly to loop |
|
Coupling Network for 13.56 MHz |
|
It matches 50 Ohm amplifier |
|
Use with CAB4-3910 loop antenna |
|
Can work with other similar antennas |
|
Type N f-n connectors attached directly to the loop |
|
Coil Set 14708-7, Test set for testing to ISO 14708-7 A/B levels |
|---|
|
LF Transmit Coil (CABTL16 & CABTL11) |
|
Frequency: 16.6 Hz - 27MHz |
|
2 loop sets |
|
Meets ISO 14708-7 Criteria A and High B levels |
|
Use 100 Watt Audio amplifier up to 35kHz |
|
Use 150 Watt 50Ohm amplifier 25 kHz - 27 MHz |
More Product Information
The LN112-30 Lens Adaptor is used for creating a 30° focused beam spread when attached to a SL112 or SL162.
Power Subsystem for Transportable Military test stand
- Provides eight channels of programmable DC power with output isolation function
- Output disconnect function
- Total control via Ethernet within power supply
- Mounted in custom in transportable shock-mount case
Alvium 1800 U is a small and powerful industrial camera. Benefit from high image quality at a great price-performance ratio!
- Various sensors: Select between CMOS sensors from ON Semi and Sony, including NIR (near infrared), for your individual applications.
- Image reproduction quality: Get the best out of your lens-to-sensor combination by high-precision Alvium Sensor Alignment.
- Intelligent power management: Design low-power or even battery-powered systems.
- USB 3.1 Gen 1: Install our VIMBA Suite and get your first images easily.
- Industrial-grade hardware: Design reliable applications by the Micro-B USB 3.1 Gen 1 connector with screw locks.
Brandywine Communications offers a wide variety of GPS antennas to accompany our products for a variety of applications. Contact your Brandywine Sales representative with your requirements so that we can help choose the right antenna for the job.
-
Die-to-die stepping time of under 100 ms
-
Up to 20 dies/sec (70,000 dies/hour) with MultiDie Testing technology
-
Even extreme variations in height, such as the case with warped wafers, can be compensated
-
Interfaces to all major analysis instrumentation, optics software and testers
-
Access to top side and bottom side of device under test (DUT)
-
Highly accurate light measurement
-
Test automation out-of-cassette for 24/7 operation
See more Key Features on Specifications & Details tab
Comprehensive, Turn-key Integrated Measurement System (IMS) with Keysight A-LFNA for On-wafer R&D Advanced Low-Frequency Noise Measurements
-
High SNR mode (up to 24 dB better signal-to-noise ratio)
-
Low-noise binning mode
-
Shading correction
-
Defect pixel correction
-
Area of interest (AOI), separate AOI for auto features
-
Binning
-
Decimation
-
Auto gain (manual gain control: 0 to 24.4 dB)
-
Auto exposure (49 µs to 67 s)
-
Auto white balance
-
Look-up table (LUT)
-
Hue, saturation
-
Color correction
-
Local color anti-aliasing
-
Reverse X/Y
-
Deferred image transport
-
Trigger programmable, level, single, bulk, programmable delay
-
Sequence mode (changes the camera settings on the fly)
-
SIS (secure image signature, time stamp for trigger, frame count etc.)
-
Storable user sets
Scope of delivery
-
Camera and IEEE 1394b cable (other configurations on request)
- UltraSeal Bar Lights are ideal for hygienic inspection environments, aseptic manufacturing, and food and beverage applications. They are IP69K certified to withstand the harshest environments.
- These Bar Lights feature either stainless steel or nickel plated aluminum housings depending on your washdown requirements.
The CSR family of calibration substrates delivers the highest accuracy available due to the high quality of each substrate. The calibration standards are manufactured using rugged, hard gold, which ensures a long lifetime.
Absolute EMC
Absolute EMC LLC is a premier North American provider of electromagnetic compatibility (EMC) expertise and test equipment. They deliver end to end consulting—covering IEC, MIL STD, CISPR, and automotive standards—hands on training for all EMC and RF test instruments, and turnkey test system design and integration. Leveraging decades of experience with every major manufacturer and the latest technologies, they also offer strategic guidance on equipment selection, market trends, and procurement to help you maximize the performance and ROI of your EMC investments.
Contact Details
Absolute EMC LLC
8240 Rugby Road, Manassas Park VA 20111, USA
Phone: 585-924-4450
Email: info@absolute-emc.com
Test & Measurement
Download Line Card
