mk-messtechnik - optoCAN-FD, Fiber-optic, Automotive Link for CAN Signals, 8 Mbit/s
The optoCAN-FD system can be used for the bidirectional optical transmission of CAN-signals with transmission rates of up to 10 Mbit/s. It consists of two identical battery supplied transceivers connected to each other with an optical fiber. With the optical transmission and the shielded case, the system is well equipped for EMI and EME tests.
The optoCAN-FD system is a cutting-edge solution for bidirectional optical transmission of CAN signals, supporting data rates of up to 8 Mbit/s. It is comprised of two identical, battery-powered transceivers interconnected via an optical fiber. Designed for optimal performance in electromagnetic interference (EMI) and electromagnetic emissions (EME) test environments, the system features optical signal transmission and a robust, shielded casing.
Key Features and Options
- Flexible Integration:
- One transceiver can be optionally integrated into a 19" rack housing.
- This rack-mounted option is ideal for setups that remain stationary, offering reduced error sources, faster setup times, and more efficient use of workspace.
- Scalable Channel Capacity:
- The 19" rack housing can accommodate up to eight automotive communication links, including SENT, CAN, FlexRay, and others.
- Channels can be added incrementally, allowing for future scalability.
- Compact Configurations:
- Variants are available with five channels integrated into a single larger housing.
- Smaller housing options are also offered, ideal for reducing tabletop footprint in multi-unit setups.
Go to our quick guide for all mk messtechnik fiberoptic links
A Quoted kit will consist of the following configuration:
2x optoCAN-FD Transceiver
- optical transceiver for CAN with flexible data rate (downward compatible to high speed CAN = CAN-HS)
- CAN-interface: max. 8 Mbit/s (up to 20 m optical fiber)
- CAN-transceiver: TJA1044GT/1Z
- CAN-choke: B82789C0513N002, 51 uH
- CAN-connector: SUB-D9
- optical connector: 2x FSMA
- integrated NiMH batteries: 5 cells, 6 V/4 Ah
- battery run time: >30 h
- charge connector: female 5 pole Binder 712 (prepared for external supply)
- shielded aluminum housing *Available option: 19" rack mount (for several automotive links in 2HU) *Standard fiber length 20 m, other length on request other chokes available on request
- Optional available external power supplies - prices on request:
- BP60-5f (4 Ah shielded battery pack to power optical device inside ALC) OR
- BP60-5f/10Ah (10 Ah shielded battery pack to power optical device inside ALC)
- SC-30-5m5m (shielded connection cable)
- PS75-5m (standard non-shielded wall plug power supply to be used outside ALC)
1x external CAN-HS/FD protector -termination 120 Ohm
- to be used for EMS/EME-testing
- metal housing with connection plate enables GND connection if wanted/needed
1x LWL-2-20m-[FSMA]-OM1_625-[FSMA]
- duplex optical fiber, cable type: OM1, multimode, 62,5/125 μm
- connector side 1: 2x FSMA male (metal), connector side 2: 2x FSMA male (metal)
- total length: 20 m
2x CH-1-5m standard plug-in charger
- number of cells: 4 .. 10 NiMH/NiCd cells up to 5 Ah
- AC-input: 100-240 V, charge current: 600-800 mA, charge connector: 5 pole male
- ***AC-plug: Type A (US), others on request
- NEW!!! Push pull option for devices (PP12)
- optional push pull 12 mm power connector for devices
- includes:
- 12 mm push pull connector devices (all devices per set)
- 12 mm push pull connector for chargers (all chargers or power supplies per set)
- optional push pull 12 mm power connector for devices
More Product Information
- Frequency Ranges: 9 kHz to 9 GHz, 13 GHz, and 20 GHz
- Measurements: Occupied Bandwidth, Channel Power, ACPR, C/I, Emission Mask, Spurious Emissions, Field Strength
- 3G and 4G Measurement options for LTE (FDD & TDD), CDMA, W-CDMA, WiMAX, GSM, and TD-SCDMA
- Interference Analyzer: Spectrogram, Signal Strength, RSSI, Mapping
- Dynamic Range: > 106 dB in 1 Hz RBW @ 2.4 GHz
- DANL: –164 dBm in 1 Hz RBW @ 1 GHz preamp On
- Phase Noise: –112 dBc/Hz @ 10 kHz offset at 1 GHz
- 1 Hz to 10 MHz Resolution Bandwidth (RBW)
- Tracking Generator up to 20 GHz
- PIM Hunting
- PIM Alert (a downloadable easyTest™ script)
- Standard three-year warranty (battery one-year warranty)
- LMR Signal Analyzers with Coverage Mapping: P25, P25 Phase 2, DMR (MotoTRBO™), TETRA, NXDN, dPMR, PTC-ITCR, PTC-ACSES, NBFM, FDD & TDD LTE
- Broadband Signal Analyzers: LTE, WiMAX
- Interference Analyzer with Interference Mapping and support for MA2700A Handheld Interference Hunter
- Auto Test and Alignment of Motorola APX P25 mobiles and portables
- Direct measurement of up to 150 watt transmitters
- Spectrum Analyzer: 9 kHz – 1.6 GHz, optional to 6 GHz
- Cable and Antenna Analyzer: 500 kHz – 1.6 GHz, optional to 6 GHz
- Return Loss, VSWR, Insertion Loss, S11 / S21, DTF
- PIM Hunting
- Internal Power Meter, optional External Power Sensor
- Handheld, battery-operated design
- Weighs less than 7.6 lb (including battery)
- Rugged, field-proven design using Anritsu's 9th generation hardware platform
- Daylight viewable color touchscreen display
- Superior Immunity to RF interference
- Remote control via Ethernet
- Standard three-year warranty (battery one-year warranty)
- 9 kHz to 9/14/20/26.5/32/43.5/54 GHz
- DANL: -164 dBm (with preamp)
- TOI: +20 dBm (typical) Analysis bandwidth: 150 MHz
- Amp range: DANL to +30 dBm
- Phase noise at 1 GHz: -110 dBc/Hz @ 100 kHz offset (typical)
- Demodulation: 5GNR, LTE FDD/TDD, RF, and modulation quality plus SSB signal analysis
- Resolution bandwidth (RBW): 1 Hz to 10 MHz
- Sweep Speed: 40 GHz/second (full span)
- RTSA bandwidth: 22, 55, 120, 150 MHz (option dependent)
- Amplitude accuracy: < 14 GHz ± 1.3 dB (± 0.5 dB, typical)
- Zero span with 60 ns minimum span
- IQ capture and streaming
- AM/FM modulation quality measurements
- Built-in PDF/HTML report generation
- EMF Measurements
- Uplink/Downlink interference analysis
- Interference hunting
- Channel Scanner
- Coverage Mapping
- 5 MHz or 10 MHz Outputs Available
- Reference Frequency Input Option
- Auto Changeover with Ref. Input Option
- Low Phase Noise Outputs
- Twenty four Outputs
- Front Panel Status Indicators
- Fault Discrete Inputs
- Compact 1U, 19” rack mount
EMI Camera for Low Emission / High Field Use
- 30x Optical Zoom
- Low light uses 0,05 lux (day) and 0,005 lux (night)
- Integrated microphone
- Battery or wall-powered
- Single Fiber operation (duel direction)
- Local controls on back (zoom/pan/tilt/focus/..)
- Options for Pan/Tilt, Joystick, HIRF, recording, motion triggering, OCR, ...
The optoCAN-FD system can be used for the bidirectional optical transmission of CAN-signals with transmission rates of up to 10 Mbit/s. It consists of two identical battery supplied transceivers connected to each other with an optical fiber. With the optical transmission and the shielded case, the system is well equipped for EMI and EME tests.
- Network Enabled Frequency Distribution Amplifier
- Dual Frequency Inputs with Auto Failover
- Low Phase Noise Reference Frequency Outputs
- Programmable per channel amplitude
- 1U 19” rack mount
- Redundant Hot Swappable Power Supplies
Absolute EMC
Absolute EMC LLC is a premier North American provider of electromagnetic compatibility (EMC) expertise and test equipment. They deliver end to end consulting—covering IEC, MIL STD, CISPR, and automotive standards—hands on training for all EMC and RF test instruments, and turnkey test system design and integration. Leveraging decades of experience with every major manufacturer and the latest technologies, they also offer strategic guidance on equipment selection, market trends, and procurement to help you maximize the performance and ROI of your EMC investments.
Contact Details
Absolute EMC LLC
8240 Rugby Road, Manassas Park VA 20111, USA
Phone: 703-774-7505
Email: info@absolute-emc.com
Test & Measurement
Download Line Card
