• Smallest rotary stage: 11.75 x 21.9 x 16 mm 
• Embedded closed-loop controller 
  • No separate electronics needed 
  • 3.3 VDC input 
  • Accepts direct motion commands (I²C, SPI, or UART) 
• Continuous 360° rotary motion 
• Angular resolution ~21.9727 mdeg closed loop 
• Built-in absolute position sensor 
• Millisecond step and settle times 
  • 0.5 deg in 16 ms closed loop 
  • 0.5 deg in 1.2 ms open loop 
• Holds position with zero power and no jitter

Southwest Microwave’s high performance End Launch connectors are designed to provide low VSWR, mode free wideband response to 110 GHz for single-layer and multi-layer printed circuit boards where the high frequency signal is on the top layer. Available in SMA (27 GHz), 2.92 mm (K) (40 GHz), 2.40 mm (50 GHz), 1.85 mm (V) (67 GHz) and 1.0 mm (W) (110 GHz). 

Male and female options along with narrow body and bulkhead feed-through. Unique clamping mechanism accommodates board thickness up to .300” (7.62 mm). Robust, reusable and repairable. Multiple launch configurations provide the best possible match to circuit layout. Works on microstrip and grounded coplanar waveguide (GCPW) designs. Signal-layer microstrip and GCPW test boards available. Soldering is optional. 

Design Assistance: 

• Printed circuit board layout and connector part number recommendation 
• 3D models for mechanical layout 
• HFSS models (version 18.0 or newer) for EM simulations upon request and availability

• Highest resolution – 12 bits all the time 
• More capability – integrates multiple instruments into one 
• Comprehensive probe support – supports over 30 probes in 9 categories 
• MAUI with OneTouch user interface for intuitive and efficient operation

EMC test equipment to evaluate the resistibility of electronic devices and components when energy charged on a human body or object is discharged to the electronic devices and components. NoiseKen brand ESD simulator is available to see malfunctions or function declines of electronic equipment for appropriate evaluations compliant with IEC 61000-4-2 Ed.2 Test Standard, ISO 10605 Ed.2 Test Standard & ISO 10605 Ed.3 Test Standard. 

The ESS-S3011A features a function which enables the user to pre-program test settings to minimize setup errors as well as having the unit be incorporated into a remote or autonomous testing setup. Another feature that sets apart NoiseKen ESD guns to that of competitors is the discharging gun separation design which helps achieve the lightweight. 

For conventional ESD guns, that have generators that are inseparable from the gun, you may experience having to replace the whole unit even only when certain parts of the unit are broken. However, with the NoiseKen’s separation design, replacement parts can be minimized to lower the running cost.

• High resolution global shutter CMOS sensor 
• 3 resolution models – 2M, 3M and 5M 
• Dual core 1.5 GHz processor 
• Embedded application software 
• Ease-to-use setup for new vision adopters 
• Built-in vision capabilities for most applications 
• Standard factory protocols (EthernetIP, Modbus, Profinet) 
• Operator interface flexibility 
• Gigabit Ethernet and RS232 communications 
• Isolated I/O and direct lamp connections 
• Integrated ring light (optional on 2M version only) 
• IP67 enclosure with lens cap 
• Convenient mounting options 
• Standard M12 cables

• Piezo stages with continuous 360° rotary motion 
• Mounted mirrors, laser and two-axis base 
• Each rotary stage only 11.75 x 21.9 x 16 mm 
• Closed-loop controller embedded in each stage 
  • No separate electronics needed 
  • 3.3 VDC input 
  • Direct digital input of motion commands ( I2C, SPI, or UART) 
• Angular resolution ~21.9727 mdeg closed loop 
  • Built-in absolute position sensor 
• Millisecond step and settle times 
  • 0.5 deg in 16 ms closed loop 
  • 0.5 deg in 1.2 ms open loop 
• Holds position with zero power and no jitter