Safran DSI - SPARTE 700 Telemetry Tracking Antenna from 20 to 24 ft
The SPARTE 700 series is a top-tier dual-axis antenna that boasts dish sizes ranging from 20 to 24 feet.
Its high gain and large aperture make it the ideal choice for tracking any flying target, such as aircraft of launch vehicle. This antenna series features a rock-solid design that guarantees peak performance under all conditions: an aluminum alloy reflector that enhances surface precision, SCM tracking feeds for trustworthy and accurate tracking, and dual-drive motors for redundancy and backlash prevention.
Furthermore, for applications that demand the utmost in performance, the SPARTE 700 series is also available in skid-mounted and trailer transportable and 3-axis gyro-stabilized versions.
TRACK YOUR AIRCRAFT OR SPACE LAUNCH VEHICULES WITH OUR LARGE APERTURE ANTENNA
And for the ever most demanding applications, the SPARTE 700 series exists in skid-mounted and trailer transportable and gyro-stabilized versions.
SPARTE 700 Features
Best-in-Class Servo Controls |
User Selectable Servo Controls |
---|---|
SCM 1000 HZ Scan Rate |
Common Design for Main & ACQ-AID Feed |
Modular L, S OR C Band |
Simple Add-On Upgrade without any Structural Change |
Dual Drive |
Uninterrupted Operations, No Backlash |
Transportable Version |
Relocatable skid-mounted or trailer version |
More Product Information

N-XONOS is a X-band transmitter dedicated to small satellites and designed to answer to an increasing demand of high data rate transmission. It is a new generation of transmitters on an innovative design.

The SPARTE 1300 series antenna is a tried-and-tested solution designed for mission-critical applications where reliable telemetry reception is essential. This antenna excels at accurately tracking flying targets, such as aircraft or space launch vehicles, even over long distances, thanks to its high-gain, large-aperture design.
Built with a robust and sturdy construction, the SPARTE 1300 series guarantees optimal performance in any scenario. It features an aluminum-alloy reflector for enhanced surface accuracy, SCM tracking feeds for dependable and precise tracking, and quad-drive motors for redundancy and no-backlash operation.

The MDR-GT / GTS is the ultra-fast on-board flight test (16 Gbps) instrumentation solution. The MDR family is technically based on a common mainframe with many high-end built-in interfaces and functions. The MDR-GT / GTS is highly customizable: functions and requirements can be addressed by adding dedicated interface modules, offering a variety of configuration options for all applications and requirements (MDR modules compatibility). Because Cybersecurity is key, the MDR-GTS has been built with secure functions: Data-At-Rest (FIPS 140-2), Key Access Management, Removable Non-Volatile Memory.

The SPARTE 500 series, commonly mounted with a 4.4 reflector, is a top-of-the-line dual-axis antenna that spans dish sizes from 15 to 18 feet. This field-proven telemetry tracking antenna has been trusted by customers for their most mission-critical applications.
With a widespread presence on test ranges around the world, the SPARTE 500 series antennas excel in meeting the rigorous demands of various flight test scenarios, whether it’s for long-range aircraft, missiles or launch vehicles tests.
These antennas offer a streamlined design, ensuring easy operation and making them a perfect fit for any ground test range, working hand in hand with smaller range trackers.

The SPARTE e100 is a hybrid antenna addressing the telemetry applications in S-Band, including hypersonic test articles.
The antenna is a combination of an Electronic Beam Steering supporting any elevation from -5° up to +95° and a single-axis mechanical rotation of the patch panel providing unlimited azimuth. The patch panel’s size enables the SPARTE e100 to achieve telemetry reception performance comparable to that of a 1.2m diameter dual-axis antenna.
This is achieved with a significantly simpler mechanical design, ensuring easier maintenance throughout the antenna’s operational lifespan.
The SPARTE e100’s rapid tracking capabilities, reaching speeds of up to 60°/s in azimuth and virtually infinite in elevation, make it an ideal “lock-on” antenna.

With its small and high ruggedized design, XMA is the best fit for remote data acquisitions in harsh and small space areas.
It is the perfect candidate for network telemetry applications and remote acquisitions, to reduce the wire intrusiveness, and acquire the data closer to the sensors.
XMA also allows data recording, data processing, GPS localization and data transmission. XMA has the smallest size/channel types ratio, and proposes optimized module set for a large number of data type acquisitions, with state-of-the-art accuracy.
A complete set of status and health information of the unit is remotely available for live monitoring and accurate data qualifiers.

The CORTEX RTR-X1 (formerly RX-1) is a compact, dual-channel telemetry receiver with a pre-D combiner, designed to span all IRIG frequency bands and conform to IRIG-specified modulations.
This off-the-shelf (COTS) product leverages the rock-solid CORTEX RTR technology components, inheriting their renowned RF performance and signal processing prowess.
The RX-1 excels in test range scenarios, offering cutting-edge features to ensure maximum data accessibility. Trust the RX-1 for top-tier telemetry reception in challenging conditions.

The N-SPHERE comes as a new generation of GNSS receiver. It implements the latest state-of-the-art positioning and synchronization techniques, to reach top class of performances for Real-Time Precise Onboard Orbit Determination (P2OD) and accurate time synchronization.

The Mobile Telemetry Rack (MTR) integrates state-of-the-art telemetry capabilities utilizing the RTR-X4 & GMDR recorder providing the ideal portable telemetry checkout system, able to receive demodulation, record, process and display your data throughout your system development.
Based on the Cortex architecture, the 4U chassis-based CORTEX RTR-X4 can support up to four channels providing the utmost flexibility and capability a Telemetry Receiver can achieve.
The GMDR Chapter 7 recorder fits particularly well for the flight test support where operability and flexibility is essential. Not only the does the Telemetry rack provide a rich set of features, the Dell Server comes with the standard Safran software tools you expect: D4 Recorder, C10 Extract, eZ Viewer Data Verification and Quick Look Software.
Additionally, multiple projects can be supported by just swapping out the OS & media drives in support of classified projects.

Safran DSI
Safran Defense & Space, Inc. (Safran DSI) is a leading provider of cutting-edge solutions designed to address the evolving challenges of national defense and advanced space missions. Headquartered in Arlington, Virginia, Safran DSI operates through specialized business units in Optronics, Space Solutions, Testing & Telemetry, Geospatial Artificial Intelligence (AI), and Assured Positioning, Navigation, and Timing (PNT). Safran DSI leverages its parent company's innovative technologies and global resources to deliver unparalleled solutions across air, land, sea, and space domains.
Testing & Telemetry BU provides complete end-to-end solutions from instrumentation, mission systems, on board recording and transmitting to base station for monitoring and controlling data. Our complete solutions are platform agnostic and are adaptable to the customer mission needs. Our instrumentation and telemetry turnkey solutions for mobile and stationary systems. This includes, but not limited to, data acquisition units (DAUs), on board recording, ground receiving, recording, and processing applications for fixed and rotary wing, manned and unmanned systems, eVTOL aircraft, as well as missile systems and space rockets/launchers. We offer comprehensive data management solutions for operational aircraft allowing for ISR, Search & Rescue, mission data loading & data transfer and pilot training & debriefing.
Contact Details
Safran Defense & Space, Inc.
3005 Business Park Drive, Norcross, GA 30071, USA
Phone: 770-753-4017
Test & Measurement
